Owners manual

8
X
Test Motion Sensor by
tapping Motion Sensor’s
set button to simulate
motion.
Control an Insteon Device with Motion Sensor
1
On Motion Sensor, press and
hold the set button until its LED
begins blinking green.
2
On the device that you would like
Motion Sensor to control, turn
on the device and adjust it to the
desired brightness, if applicable.
3
Press and hold the set button
until you hear a double-beep.*
*For Insteon bulbs, remove from power and then return
to power. For devices that do not have a beeper, look
for their status LED to ash and return to normal.