Manual

Page 3 of 14 2475DA1 - Rev: 1/21/2014 7:52 AM
In-LineLinc Dimmer Dual-Band
Congratulations on your purchase of the elegant, high-quality In-LineLinc Dimmer Dual-Band. In-LineLinc
Dimmer installs in-line to provide INSTEON control of individual dimmable lighting fixtures. Additionally,
In-LineLinc Dimmer eliminates the need for a conventional light switch, reducing the “switch sprawl”
common to automation projects. You can also use In-LineLinc Dimmer for INSTEON signal repeating and
phase bridging (like an Access Point, #2443). In-LineLinc Dimmer supports voltages from 100-277V,
50/60Hz and loads up to 400W, making it the perfect energy-saving, wireless controller.
Features and Benefits
• Once installed, INSTEON setup is easy
• Controls incandescent loads up to 400W
• Supports up to 400 scene memberships
• Shows INSTEON setup mode activity with beeper and dual-color Status LED
• Communicates simultaneously over both radio frequency (RF) and the powerline
• Acts as an Access Point for RF-only INSTEON devices
• Stores setup state in non-volatile memory so settings aren’t lost during power outages
• Wires into standard junction boxes (requires a NEUTRAL connection)
• Two-year warranty
What’s in the Box?
• In-LineLinc Dimmer Dual-Band
• Quick Start Guide
• Four (4) wire nuts
Status LED
Set button
ON button
OFF button