Leak Sensor INSTEON® Leak Sensor Owner’s Manual #2852-222 Page 1 of 7 Rev: 10/28/2013 8:11 AM
Leak Sensor ................................................................................................................................................. 3 INSTEON Setup ........................................................................................................................................... 3 INSTEON Controllers, Responders and Links .......................................................................................... 3 Add Leak Sensor to INSTEON Hub ..............................
Leak Sensor In the Box Leak Sensor Quick Start Guide Tools Needed None Optional Accessories INSTEON Hub INSTEON Setup Some products have subtle differences in their setup procedures. Where necessary, please refer to the other device’s owner’s manual for details. INSTEON Controllers, Responders and Links Let’s define a few terms.
5) 6) Test by tapping Leak Sensor Set button. Responder will turn on.
Specifications General Brand INSTEON Manufacturer product no.
Troubleshooting Problem Leak Sensor is unable to communicate with another INSTEON device Possible Cause Leak Sensor and the other device are out of range It takes a long time for one or more of Leak Sensor’s responders to respond The other device is near a localized powerline noise source or attenuator Leak Sensor is repeatedly retrying to control a missing responder Leak Sensor can turn responder on, but not off Leak Sensor is not designed to turn off responders.
Certification and Warranty FCC and Industry Canada Compliance Statement This device complies with FCC Rules Part 15 and Industry Canada RSS-210 (Rev. 7). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
