Specifications

Page 9 of 16 2342-232/2444A2WH4, 2342-432, 2342-532 Rev: 1/21/2014 7:14 AM
2) Press & Hold Set Button for 3 seconds - until you hear a beep
Mini Remote’s LED will blink green
3) Press & Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
Mini Remote’s LED will blink red
4) Tap Set Button
Mini Remote’s LED will double-blink red
5) For each Responder you wish to remove from scene, Press & Hold its Set Button until Mini Remote
double-beeps
Mini Remote’s LED will continue to double-blink red
6) When all your devices have been removed, tap Mini Remote’s Set Button
Mini Remote will double-beep and its LED will turn off
Change Button / Scene Configuration (e.g., Change to 8 Button Mode)
1. Press & Hold Set Button for 3 seconds - until you hear a beep
LED will blink green
2. Press & Hold Set Button a 2
nd
time for 3 seconds - until you hear a beep
LED will blink red
3. Press & Hold Set Button a 3
rd
time for 3 seconds - until you hear a beep
LED will blink green
4. Press & Hold Set Button a 4
th
time for 3 seconds - until you hear a beep
LED will blink red
5. Tap Set Button
LED will double-blink red
6. Press the appropriate button for the desired button/scene configuration
Desired Configuration
Button to Press
8 Button Toggle
Bottom Row, Left Side
8 Button Non-Toggle (Always On)
Top Row, Left Side
4 scene (Default)
Top Row, Right Side
Mini Remote will double-beep and its LED will turn off
7. To confirm the configuration, tap the top left button on Mini Remote several times
LED will flash as follows
Flash Pattern
Configuration
Red every tap
4 scene
Green every tap
8 scene Non-Toggle (Always On)
Alternating Green / Red
8 scene Toggle