Manual

Page 5 of 13 2634-222 - Rev: 1/21/2014 7:45 AM

Using On/Off Outdoor Module

Local Control Operation

LED Activity

Adjust Local Settings

LED On or Off

Default = On

This setting is only adjustable via software or a central controller. When enabled, LED On will cause the LED to be

green when the Load is on and Red when the load is off.

Blink on Traffic

Default = enabled

This setting is only adjustable via software or a central controller. On/Off Outdoor Module LED will blink green for

INSTEON traffic and if it detects noise that could disrupt communication.

Programming Lock

Default = disabled

This setting is only adjustable via software or a central controller. When enabled, Programming Lock will disable the

set button so that a user can not adjust settings or modify links. This is typically used in commercial or installer

applications.

Connected load/responders

Tap

Double-tap

LED

Set Button

On/Off

(instant)

Green/

Red

LED

Status/Setup Mode

Solid green

Load is on

Solid red

Load is off

Blinking green

Linking mode

Blinking red

Unlinking mode