INSTEON Range Extender Quick Start Guide
INSTEON Range Extender Opposite Status LED Phase Same Phase Set Button
Installation Plug the Range Extender into an unswitched wall outlet.
Placement When extending the reach of your INSTEON network, locate the Range Extender near your INSTEON RF device.
Briding Electrical Phases (Optional) 1 To begin phase detection, quickly tap the Range Extender’s set button four times.
2 Inspect the status LED of a second Range Extender or any Dual-Band INSTEON device.
3 Exit phase detection by tapping the set button on the Range Extender.
Learn More For the complete Owner’s Manual, video tutorials, product support and more, visit: insteon.com/support MANUAL Protected under U.S. and foreign patents (see www.insteon.com/patents) ©2014 INSTEON Rev 06.20.
