SDS
MATERIAL SAFETY DATA SHEET
NOTE: THE INFORMATION CONTAINED IN THIS SHEET IS DISCLOSED IN GOOD FAITH AND IS PROVIDED TO THE BEST KNOWLEDGE OF
INSULATION SOLUTIONS, INC. IT IS NOT A WARRANTY AND INSULATION SOLUTIONS, INC. ASSUMES NO RESPONSIBILITY FOR DAMAGES
INCURRED FROM THE USE OR INABILITY TO USE THIS PRODUCT.
SECTION 1: PRODUCT IDENTIFICATION
Name: Wraptor
®
Description: Micro Perforated White Woven Polypropylene
Manufacturer/Distribution: Insulation Solutions, Inc.
Address: 401 Truck Haven Rd., East Peoria, IL 61611
Phone: 866-698-6562 Fax: 309-698-0065
Email: info@isibp.com
SECTION 2: HAZARDOUS INGREDIENTS
This product is not considered to be hazardous, and is not classied as a controlled product. It is comprised primarily of
polypropylene, which is considered to be non-hazardous.
SECTION 3: PHYSICAL DATA
Boiling Point: Not Applicable
Temperature Range: -50°F to 180°F / -46°C to 82°C
Appearance: Flexible Sheet Material
Odor: None
SECTION 4: FIRE & EXPLOSION DATA
Flame Spread: 15 (NFPA Class A, UBC Class 1) (ASTM E-84-03)
Smoke Development: 40 (NFPA Class A, UBC Class 1) (ASTM E-84-03)
Extinguishing Media: CO2, Dry Chemical, Water or Foam
Usual Fire Hazardous: Polypropylene is not highly ammable, but in contact with ame they will melt and burn.
SECTION 5: REACTIVITY DATA
Stability: Product is stable and inert to most chemicals. None cause a violent reaction.
Incompatibility: Check with manufacturer prior to using as a containment or barrier for chemicals other than water.
SECTION 6: HEALTH & HAZARD DATA
Inhalation: None
Eyes and skin: None
Ingestion: Product should not be eaten or kept in contact with food.
SECTION 7: HEALTH & HAZARD DATA
Generally Wraptor
®
requires no special precautions when handling. However, the material may become slippery when wet, and
caution should be taken when used in applications where the product will be walked on.