User's Manual

Communication Failures
133
11
2. Move across the room or to a different room. Then press
Retry.
a. If you press Retry within 2 minutes, the PDM tries to
communicate with the Pod again. If it cannot communi-
cate, it displays the same screen as in Figure 11-2, then
finally the “Communication timeout” screen (Figure 11-3).
Press OK to check the Pod status.
b. If the status check fails, you will see Figure 11-4. Press OK
to try checking Pod status again, or press Discard to
begin the deactivation process.
Figure 11-1 Figure 11-2 Figure 11-3 Figure 11-4