User's Manual

Getting Started
16
2
• Press Ye s if you are ready to activate a new OmniPod. See
Chapter 5, Using the OmniPod, to learn how to activate a
new Pod.
• Press No if you do not want to activate a Pod at this time.
The PDM displays the Home screen.
Your healthcare provider will help you fill and apply your first
OmniPod. The process is easy because on-screen messages walk
you through every step. Please refer to Chapter 5, Using the
OmniPod, for detailed instructions.
You can press and hold the Power button to turn off the
PDM at any time during setup. Otherwise, it turns off
automatically after 5 minutes. If you do not complete the
entire setup within 60 minutes, when you turn on the
PDM again you will return to the beginning of the Setup
Wizard.
If you ever need to return the PDM for repair or
replacement, contact your healthcare provider for
instructions on going back to treatment by injections.
You may want to adjust the PDM screen time-out
and backlight time-out. For more information on
how to do this, see Chapter 6, Using the Personal
Diabetes Manager.
Use the form at the end of this User Guide to write
down all your settings from the Setup Wizard. You
can also attach a copy of the CSII orders that you
used during your training session. If you ever need
to reset your PDM, having these settings handy will
make setup very easy.
Resources for OmniPod users are available from the
Customer Support tab on our Web site:
MyOmniPod.com/support/resources
Among these resources are an online copy of this
User Guide and the My OmniPod System Information
form, which you will also find at the end of this
guide.