User's Manual

Using the OmniPod

Apply the new OmniPod

Prepare the Pod for applying to your infusion site:

1. To remove the needle cap on the underside of the Pod, pull it

upward (Figure 5-15).

2. Using the pull tabs, remove and discard the white paper

backing from the adhesive tape (Figure 5-16).

3. Apply the Pod to the prepared infusion site. Press firmly to

secure it to your skin.

When you remove the needle cap, a few drops of

insulin should be visible at the end of the needle.

Figure 5-15 Figure 5-16

For the Pod to work best, apply it:

1. Crosswise or at a slight angle on your abdo-

men, hip, upper back, or buttocks (see A)

2. Up and down or at a slight angle on your

upper arm or thigh (see B)

3. At least one inch away from the last site

The OmniPod’s adhesive keeps it securely in place for

up to 3 days. However, if necessary, several products

are available to enhance adhesion. Ask your health-

care provider about these products. Avoid getting

body lotion, creams, or oils near the infusion site;

these products may loosen the adhesive.