User's Manual

Checking Your Blood Glucose
84
7
c. Press Done.
7. If you do not want to mark the test as a control solution test,
press Next instead of Tag.
8. Compare the control solution test result to the range printed
on the test strip vial label. If the result does not fall within the
range, repeat the test. If the result still does not fall within
the range, call Customer Support, 800-591-3455, 24 hours/
7 days (from outside the United States, 781-457-5098).
9. Remove the test strip. If the strip-port light was turned on, it
now turns off.
If you remove the test strip before this step, you will still see
the available soft keys.
You can select a maximum of 2 tags.
If the suggested bolus calculator feature is turned Off,
the Bolus soft key appears instead of Next.
Figure 7-9
If you mark a test as a control solution test by mistake,
you can unmark it: Press Tag, select Control, then
press Clear.
Be sure to discard used test strips. (You can only use
test strips once.)