Users Manual

125
Connecting DexcomG6CGM to the Pod12
To connect the DexcomG6 transmitter
Connect CGM transmitter and enter the serial number as follows:
1. From the Home screen, tap Menu
icon (
) > Settings > CGM Transmitter.
e CGM Transmitter screen displays the
saved serial number .
Note: If the transmitter serial number was
previously deleted, the serial number eld is
empty. (See "12.4. Disconnecting the CGM
from the Pod" on page 126).
2. Tap ENTER NEW.
3. Tap the serial number eld to display the
alphanumeric keypad.
4. Enter the serial number printed on the back
of your transmitter or on the transmitter
box, then tap Done.
Warning: Conrm the transmitter
serial number you entered into the
Omnipod 5 app is the same as the
one in your DexcomG6 app and the
transmitter you are wearing. In cases
where more than one person in the
household is wearing a CGM, it is critical
to ensure the correct transmitter serial
number is entered. Mixing up CGM
transmitter entries could lead to serious
cases of hyperglycemia or hypoglycemia
5. Tap SAVE.
Note: If you tap CANCEL while the system is attempting to connect, the
serial number is not saved. If you exit the current screen, but do not cancel,
the Pod continues connecting to the transmitter in the background.
6. Tap CONFIRM to start the connection process.
e connection process can take up to 20 minutes.
When Pod communication is successful, the screen displays "Connecting
Transmitter".
If the Pod is unable to connect with the CGM transmitter within 20 minutes,
the message "Transmitter Not Found" displays. Tap NEED HELP for more
information.
Using a
CGM with
OmniPod 5
Effective Date: 22DEC2020, PCO-000267