User Guide

Adjusting Settings 9
100
9 Adjusting Settings
• To turn airplane mode on or o via the Power button:
a. Press and hold the Power button until a screen appears with an Airplane
Mode option.
b. Tap Airplane Mode to toggle between on and o.
Wi-Fi
To manage the PDM's Wi-Fi connection:
1. Navigate to: Settings icon ( ) > PDM Device > Wi-Fi.
2. Tap the toggle to toggle Wi-Fi on or o. When the Wi-Fi toggle is set to on,
the PDM scans for available Wi-Fi networks.
3. To connect to or remove a Wi-Fi network, tap Wi-Fi to display a list of
available Wi-Fi networks. en:
• To connect to a new network, tap the name of the desired network. Enter
the network password, if necessary.
• To remove a network, tap the name of the network. en tap FORGET.
4. Tap the "back" button below the PDM screen when nished.
Note: e PDM can only connect to standard Wi-Fi networks, which are
networks that only require a name and a password. e PDM cannot connect
to Wi-Fi networks that require additional steps such as accepting Terms and
Conditions.
Caution: e upper right corner of the Wi-Fi screen has an Options icon ( ). e
options in this Options menu have not been integrated into the Omnipod DASH™
System. Do not change any of the options found in this Options menu.
Bluetooth®
is option lets you pair to, rename, or remove a BG meter. ese actions are
described in "Pairing, unpairing, or renaming a BG meter" on page 114.
Omnipod DISPLAY™
e Omnipod DISPLAY™ app is a smartphone application that lets you see
your PDM data on your phone. e PDM and phone use Bluetooth® wireless
technology to communicate.
Note: While pairing to the Omnipod DISPLAY™ app, the PDM does not check
Pod status.
To pair your PDM to Omnipod DISPLAY™ on your phone:
1. Place your PDM and phone next to each other.
2. On your phone:
a. Download and install the Omnipod DISPLAY™ application or unpair
from an older PDM.