SDS

ManualsBrandsInsulfoam ManualsBuilding materialsLaminated Expanded Polystyrene Foam Board Insulation 2" x 4' x 8' R-8

Safety Data Sheet

Material Name: 085 Insulfoam Molded EPS Products

Section 1 - PRODUCT AND COMPANY IDENTIFICATION

Material Name

041 Insulfoam Molded EPS Products

Trade Names

Part Number(s): Type I, VIII, II, IX, XIV and XV, R-Tech. Highly customizable: Thickness up to 40" in a

single board

Synonyms

Molded Expanded Polystyrene (MEPS)

Product Use

Insulation materials, Industrial use, Consumer use. packaging.

Restrictions on Use

None known

Manufacturer Information

Insulfoam, a division of Carlisle Construction Materials

1057 Sunburst Lane

Mead, Ne. 68041-4033

Section 2 - HAZARDS IDENTIFICATION

Classification in accordance with paragraph (d) of 29 CFR 1910.1200.

Combustible Dust

Reproductive Toxicity - Category 2

Reproductive Toxicity - Effects on or via Lactation

GHS Label Elements

Symbol(s)

Signal Word

Warning

Hazard Statement(s)

May form combustible dust concentrations in air

Suspected of damaging fertility or the unborn child

May cause harm to breast-fed children

Precautionary Statement(s)

Prevention

____________________________________________________________

Page 1 of 10 Issue date: 2015-05-26 Revision 1.0 Print date: 2015-06-17

Summary of content (10 pages)

PAGE 1
Safety Data Sheet Material Name: 085 Insulfoam Molded EPS Products Section 1 - PRODUCT AND COMPANY IDENTIFICATION Material Name 041 Insulfoam Molded EPS Products Trade Names Part Number(s): Type I, VIII, II, IX, XIV and XV, R-Tech. Highly customizable: Thickness up to 40" in a single board Synonyms Molded Expanded Polystyrene (MEPS) Product Use Insulation materials, Industrial use, Consumer use. packaging.
PAGE 2
Safety Data Sheet Material Name: 041 Insulfoam Molded EPS Products Obtain special instructions before use Do not handle until all safety precautions have been read and understood Wear protective gloves/protective clothing/eye protection/face protection Wash thoroughly after handling Do not eat, drink or smoke when using this product Avoid contact during pregnancy/while nursing Do not breathe dusts or mists Response IF exposed or concerned: Get medical advice/attention Storage Store locked up Disposal Dispo
PAGE 3
Safety Data Sheet Material Name: 041 Insulfoam Molded EPS Products Delayed Suspected of damaging fertility or the unborn child. May cause harm to breast-fed children. Section 5 - FIRE FIGHTING MEASURES Extinguishing Media Suitable Extinguishing Media Use carbon dioxide, regular dry chemical, regular foam or water. Unsuitable Extinguishing Media None known Special Hazards Arising from the Chemical Slight fire hazard. Combustible Dust. Dust/air mixtures may ignite or explode.
PAGE 4
Safety Data Sheet Material Name: 041 Insulfoam Molded EPS Products when using this product. Avoid contact during pregnancy/while nursing. Do not breathe dusts or mists. Do not get in eyes, on skin, or on clothing. Conditions for Safe Storage, Including any Incompatibilities Store locked up Store in a cool dry place. Store in a well-ventilated place. Keep away from heat and ignition sources. Keep away from incompatible materials.
PAGE 5
Safety Data Sheet Material Name: 041 Insulfoam Molded EPS Products Section 9 - PHYSICAL AND CHEMICAL PROPERTIES Appearance foam Physical State solid Odor Slight,pentane Color white Odor Threshold Not available pH Not available Melting Point 160 °F (softens) Boiling Point Not available Freezing point Not available Evaporation Rate Not available Boiling Point Range Not available Flammability (solid, gas) 2 Autoignition 850 °F Flash Point 610 °F Lower Explosive Limit Not available
PAGE 6
Safety Data Sheet Material Name: 041 Insulfoam Molded EPS Products Section 11 - TOXICOLOGICAL INFORMATION Information on Likely Routes of Exposure Inhalation Dust may cause irritation of the nose, throat and upper respiratory tract. Skin Contact May cause mechanical irritation. Eye Contact May cause mechanical irritation. Ingestion No information on significant adverse effects.
PAGE 7
Safety Data Sheet Material Name: 085 Insulfoam Molded EPS Products No target organs identified. Specific Target Organ Toxicity - Repeated Exposure No target organs identified. Aspiration hazard No information available for the product. Medical Conditions Aggravated by Exposure No data available. Section 12 - ECOLOGICAL INFORMATION Ecotoxicity Harmful to aquatic life with long lasting effects. Component Analysis - Aquatic Toxicity Pentane 109-66-0 LC50 96 h Oncorhynchus mykiss 9.
PAGE 8
Safety Data Sheet Material Name: 041 Insulfoam Molded EPS Products Section 15 - REGULATORY INFORMATION U.S. Federal Regulations This material contains one or more of the following chemicals required to be identified under SARA Section 302 (40 CFR 355 Appendix A), SARA Section 313 (40 CFR 372.65), CERCLA (40 CFR 302.4), TSCA 12(b), and/or require an OSHA process safety plan.
PAGE 9
Safety Data Sheet Material Name: 085 Insulfoam Molded EPS Products Section 16 - OTHER INFORMATION HMIS Rating Health: 1* Fire: 2 Reactivity: 0 Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe * = Chronic hazard NFPA Ratings Health: 1 Fire: 2 Reactivity: 0 Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe Summary of Changes New SDS: 5/22/2015 Key / Legend ACGIH - American Conference of Governmental Industrial Hygienists; ADR - European Road Transport; AU - Aust
PAGE 10
Safety Data Sheet Material Name: 041 Insulfoam Molded EPS Products assume responsibility for the results of such application. This information is furnished upon the condition that the person receiving it shall make his own determination of the suitability of the material for his particular use ____________________________________________________________ Page 10 of 10 Issue date: 2015-05-26 Revision 1.