Technical Specifications

FACT SHEET
For more information, contact GreenFiber: Manufacturing Locations:
GreenFiber Corporate Office
2500 Distribution St.
Charlotte, NC 28203
(p) 800-228-0024 (f) 704-379-0685
(e) [e-mail]
www.greenfiber.com
Albany, NY
Delphos, OH
Norfolk, NE
Phoenix, AZ
Salt Lake City, UT
Tampa, FL
Waco, TX
PM-6.3-299 Rev C 10/13
TM-6.4-12 REV C 5/13
THIS IS INSULMAX™ BLOW-IN CELLULOSE INSULATION
DO NOT ADD WATER TO THIS PRODUCT
Application Coverage Chart 19.05 lbs (8.64 kg) INS441LD
R-Value at 75° F Mean
Temperature
Valor de resistincia termica
(valor R) a 75° F de
temperatura media
Minimum Thickness (Inches)
Expesor minimo (en pulgadas)
Net Coverage
(no adjustment for framing)
Recumbrimiento neto
(Sin compensacion para el entramado)
Gross Coverage (based on 2"x 6"
framing on 16" centers)
Recubrimiento Bruto - basado en armazón de
5.08 cm x 15.24 cm en centro de 40.64 cm
Initial
installed
thickness
Espesor inicial
instalado
Settled Thickness
Espesor assentado
Maximum Sq. Ft.
per Bag
Metros cuadrado
máximos por bolsa
Minimum Bags per
1,000 Sq. Ft.
Cantidad minima de
bolsas por 1,000 ples
cuadrados
Minimum Weight
per Sq. Ft. (lbs/sq.
ft.)
Peso minimopor pie
cuadrado (lb/pie2)
Maximum Sq. Ft.
per Bag.
Metros cuadrado
maximos por bolsa
Minimum Bags
per 1,000 Sq. Ft.
Cantidad minima de
bolsas por 100 metros
cuadrados
R13
R19
R22
R25
R30
R38
R49
R60
4.29
6.19
7.12
8.05
9.57
11.97
15.20
18.37
3.86
5.57
6.41
7.25
8.62
10.77
13.68
16.53
56.0
36.7
31.1
26.8
21.7
16.4
12.0
9.3
17.9
27.2
32.2
37.2
46.1
61.1
83.5
108.1
0.340
0.519
0.613
0.710
0.878
1.164
1.591
2.059
61.8
40.0
33.5
28.7
22.9
17.1
12.4
9.5
16.2
25.0
29.8
34.9
43.6
58.5
80.7
105.0
THE ABOVE COVERAGE CHART IS BASED ON A NOMINAL BAG WEIGHT OF 19.05 LBS. USING THE GREENFIBER MONARCH BLOWING MACHINE. SETTINGS ARE NOT
ADJUSTABLE. THE CHART IS BASED ON SETTLED THICKNESS AND IS FOR ESTIMATING PURPOSES ONLY. DO NOT EXCEED MAXIMUM SQUARE FEET COVERAGE PER BAG. THE
APPLICATOR MUST INSTALL BOTH THE MINIMUM NUMBER OF BAGS PER 1,000 SQUARE FEET AND THE MINIMUM INSTALLED THICKNESS TO INSURE THE STATED R-VALUE
HAS BEEN REACHED. FAILURE TO MEET BOTH THESE REQUIREMENTS MAY PREVENT THE APPLICATION OF DESIRED R-VALUE. THIS PRODUCT MUST BE INSTALLED DRY.
THIS COVERAGE CHART DOES NOT APPLY TO FLOOR APPLICATIONS. DO NOT ADD WATER TO THIS PRODUCT. JOB CONDITIONS, APPLICATION TECHNIQUES, EQUIPMENT
AND SETTINGS CAN INFLUENCE ACTUAL COVERAGE. MINIMUM NET WEIGHT IS 18.1 LBS.
D DO NOT ADD WATER TO THIS P DO NOT ADD WATER TO THIS PRODUCT
Application Coverage Chart 19.05 lbs (8.64 kg)
INS541LD RODUCT
Application Coverage Chart 19.05 lbs (8.64 kg) INS541LD
ry DeDDRYnse Pack Sidewall Applications (3.5 pcf minimum installed density) DO NOT ADD WATER TO THIS PRODUCT
Dry Dense Pack Sidewall Applications (3.5 pcf minimum installed density) DO NOT ADD WATER TO THIS PRODUCT
Thermal Resistance R-
Value
Valor de resistincia termica
(valor R)
Framing
Armazón
Installed Thickness
Inches
Espesor instalado
(pulgados)
Minimum Wt.
Per Sq. Ft.
Peso minimopor pie
cuadrado (lb/pie2)
Maximum Coverage Per Bag
(not adjusted for framing)
Recumbrimiento máximos por bolsa
(Sin compensacion para el entramado)
Maximum Coverage per Bag
(adjusted for framing)
Recumbrimiento máximos por bolsa
(Con compensacion para el entramado)
Square Feet per Bag
16" OC 24" OC
R13 2x4 3.5 1.02 18.7 20.6 19.9
R21 2x6 5.5 1.60 11.9 13.1 12.7
THIS COVERAGE CHART IS FOR DRY APPLIED APPLICATIONS ONLY AND IS BASED ON THE KRENDL KS200, WITH MATERIAL APPLIED DRY. FOR MAXIMUM COVERAGE PER BAG
(ADJUSTED FOR FRAMING), THE FRAMING FACTOR FOR 16" OC SPACING IS 9.375%; FOR 24" OC SPACING THE FRAMING FACTOR IS 6.25%.
READ THIS BEFORE YOU BUY
What you should know about R-Values
This chart shows the R-value of this insulation. R means resistance to heat flow. The higher the R value, the greater the insulating
power. Compare insulating R-values before you buy. There are other factors to consider. The amount of the insulation you need
depends on the climate you live in. Also, your fuel savings from insulation will depend on the climate, the type and size of house, the
amount of insulation already in your house and your fuel use patterns and family size. If you buy too much insulation it wil cost you
more than what you will save in fuel. To get the marked R-value, it is essential that this insulation is installed properly.