Bluetooth Headset – HS920 Bluetooth Headset USER’S MANUAL INSUNG ELECTRONICS Co., Ltd.
Bluetooth Headset – HS920 1. INTRODUCTION Bluetooth Headset (HS920) is a wireless headset using Bluetooth technology. Bluetooth Headset (HS920) provides audio connectivity to other Bluetooth devices such as mobile phones, PDAs, and PCs. This is compatible with any Bluetooth Audio gateway. Before using, read this manual.
Bluetooth Headset – HS920 2. Operation 1. Pairing the Headset Before the Headset communicate, it must be paired to the companion device it will be used with, such as a mobile phone. This is to ensure the Headset only communicates with the device chosen by the user and not any other Bluetooth devices in range. Pairing is needed only once when first operation and changing devices such as Headset, mobile phone, or audio gateway.
Bluetooth Headset – HS920 2. Making Calls Pressing TALK button, you can make a call. Step1. Headset must be ‘ Power ON’ condition after headset is paired with other Bluetooth device. * Refer to a previous page for detail information of pairing * ‘Power ON’ condition : Green LED blinking every 3 second. Step2. To make a call, put the number you want to call in mobile phone and press TALK button in headset. If you just press TALK button in headset, you will be connected to last calling. Step3.
Bluetooth Headset – HS920 4. Adjusting the Volume During a call, volume can be adjusted by UP, DOWN button. Up : Increase volume. Down : Decrease volume 3. When use by Hands-Free Bluetooth Headset(HS920) provides Hands-Free Profile when Bluetooth mobile phone is connected to Hands-Free. How to do pairing is same with Headset.
Bluetooth Headset – HS920 4. Charging Bluetooth Headset(HS920) has Li-Polymer battery inside. Full charging gives 240 hours standby or maximum 7 hours of continuous talking condition. Before using headset at first time, charge a battery fully. Charging time is about 2 hours from discharged to fully charged. ◈ For the state-of-the-art Li-Polymer battery of Bluetooth Headset (HS – 920), battery’s life is not affected by charging a battery from not fully discharged. Step1.
Bluetooth Headset – HS920 5. Troubleshooting Refer to following indication when abnormal situation occurs 1. Can not do pairing ☞ reset Headset and do pairing again. 2. Sound is too loud or too small. ☞ After connecting, ensure a mobile phone’s volume and use UP/DOWN button for proper volume. 3. Pressing TALK button don’t make a call. ☞ Check discharge and pairing. ▲ CAUTION ▲ ◈ Do not make unapproved separation or changes. This may be dangerous.
Bluetooth Headset – HS920 FCC ID: SE4HS920 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. INSUNG ELECTRONICS Co., Ltd.
