Datasheet

Configuration with the Software HSComm easy INSYS GSM 4.2 easy
28 January 07
5.3.3 Program settings
A small window is displayed which offers the selection of two options: Use
"Automatic detection at program start" to attempt to establish a connection with
the INSYS GSM 4.2 immediately after the start procedure. Use the item "Extended
logging” to log all INSYS GSM 4.2 easy messages. The log can be viewed at the
menu item "Send/receive log".
5.3.4 Terminal
This terminal enables you to control the INSYS GSM 4.2 easy with AT commands.
5.3.5 Language
Selection of the HSComm user interface
language: German or English. The setting
has no effect on the functionality of the
INSYS GSM 4.2 easy.
5.3.6 Overview
All current settings of the HSComm are clearly displayed. The output extends over
several screen pages and can be printed or saved as text file.
Note: Read out the settings of your device and have this overview ready
when contacting the hotline!
5.3.7 Send/receive log
All current settings of the HSComm are clearly displayed. The output extends over
several screen pages and can be printed or saved as text file. For this function, the
menu item "Program settings" must have a checkmark for "Extended logging".
Note: Read out the settings of your device and have this overview ready when
contacting the hotline!
5.3.8 Information
Receive information regarding the program HSComm easy. If the INSYS GSM 4.2
easy has already been read out, the firmware version of the connected INSYS GSM
4.2 easy will be displayed.
5.3.9 Help
This item contains the online help. Press the F1 key to access help anytime.