Datasheet

Remote Configuration with EASY-SOFT and INSYS Connect INSYS GSM 4.2 easy
38 January 07
6 Remote Configuration with EASY-SOFT and INSYS
Connect
In the supplied software EASY-SOFT by Moeller, no functionality is designed for
remote configuration.
The INSYS GSM 4.2 easy therefore includes the program “INSYS Connect”, which
initiates the connection setup to a remote INSYS GSM 4.2 easy. A compact
controller Moeller easy is connected to this device.
For the connection setup, a communication device (e.g. analogue modem, ISDN TA
or GSM Modem) is required locally. Any of these devices can be used to establish a
connection to the remote INSYS GSM 4.2 easy via a dial up connection. When the
connection is established, INSYS Connect will retreat from the serial interface. The
communication device connected to this serial interface now has no connection
to another program, but maintains the connection. The program EASY-SOFT can
now be started and program the easy device as if it was connected to a local serial
port. The serial interface, to which the communication device with the data
connection to the remote INSYS GSM 4.2 easy is connected, is used for this
process.
centre
Pocket
Modem 56k
INSYS GSM 4.2 easy
telephone
network