Datasheet

22 5. Configuration Software HSComm
PIN
The INSYS GSM small can store the PIN of the SIM card internally to be able to
automatically register at the GSM network during start up.
To enter, activate “new PIN” and enter the PIN. For safety reasons, * is displayed instead
of digits. The default setting is “0000”. When the INSYS GSM small has stored a PIN, the
option “PIN active” is checked.
A PIN stored in the INSYS GSM small is deleted by “Delete PIN”. This also enables the
operation of SIM cards without PIN.
“PIN active” indicates that a PIN is stored. Below you will find the registered status in the
following format:
GSM: registered ready for operation
GSM: refused GSM network does not allow access
GSM: not registered SIM accepted but no access to GSM network
GSM: network search Radio contact with GSM network too poor Î relocate antenna
position
SIM PIN missing Enter PIN number of the SIM card and restart device
SIM PUK missing PIN of the SIM card is locked after repeated false attempts. To
unlock, the PUK, which you find in the contract documents of
your GSM provider is required. Remove the SIM card and enter
the PUK using the menu of any commercial mobile phone.
Absolutely ensure afterwards that the correct PIN is stored in
the INSYS GSM.
SIM card missing No SIM card in the device
Service Center Number
Entering the number of the SMS service center (SMSC) of the own GSM provider is
required for sending alarm messages via SMS. Enter the number in international format
(e.g. Germany: 0049). +49...) .
The SMSC for your SIM card are in the contract documents of your GSM provider.
Auto answer
A data call is accepted by the INSYS GSM small after the set number of ring tones.
0 off
2..255 active
Version 1.00 / 09.04