User's Manual

5 PRINTER OPERATION
45
Figure 5. 12 Printer operating panel
b. Ftp (network). Input the printer's IP address in the address bar of the PC windows folder,
and transmit the G-code file to the printer via network for reading by the printer.
Figure 5. 13 Ftp transmission PC interface
5.4.3 Load the print file
1. Select the location of the print file first. Select the location where the file is saved in the pull-down
menu at the top right corner on screen, such as U-disk or file transfer protocol (Ftp);
2. Click the file opening icon at the bottom left corner on screen to pop up the list of print files;
Figure 5. 14 Position of the button to open file
3. Select the print file to be printed, and then click "Open" button to load the print file. In U-disk
import mode, the U-disk may be pulled out after the print file is loaded, which does not impact the
printing.