AS Integral Patios Twine Cover Only for FRONT FASCIA wider than 16ft fastening/sealing the front splice
tio Cover STEP 01 Preparing the FRONT FASCIA & SPLICE Lay the front fascias parallel and evenly on a flat non-abrasive surface. Measure your FRONT FASCIA SPLICE. If you live in the Midwest or West U.S. your splice will be 12” silver color. If you live in the Central or East your SPLICE wil be 30” white.
io Cover son Guide STEPSON-A Preparing the FRONT FASCIA & SPLICE Hook your measuring tape inside the SPLICE measuring & mark at 6” inside the 12”. Measure over and mark at 15” inside the 30” splice. STEP O-B Preparing the FRONT FASCIA & SPLICE Hook your measuring tape inside the FRONT FASCIA. Measure and mark inside both FRONT FASCIAS 15” if you have the 30“ SPLICE. Measure and mark inside both FRONT FASCIAS 6” if you have the 12” SPLICE.
Twine | o Cover son Guide STEPSON-A Preparing the FRONT FASCIA for 12” SPLICE Hook measuring tape on back side of FRONT FASCIA. Measure over both directions of both pieces and mark with a pencil. Measure up 3/4” from bottom and down 3/4” from top. Mark locations with a pencil. STEP O03-B Preparing the FRONT FASCIA for 30” SPLICE Hook measuring tape on back side of FRONT FASCIA. Measure over both directions and mark with a pencil. Measure up 3/4” from bottom and down 3/4” from top.
STEPSON-A Preparing the FRONT FASCIA for 12” SPLICE Hook measuring tape on end of FRONT FASCIA. Measure over both directions of both pieces and mark with a pencil. Measure up from bottom and down from top. Mark locations with a pencil. STEP O-B Preparing the FRONT FASCIA for 30” SPLICE Hook measuring tape on end of FRONT FASCIA. Measure over both directions and mark with a pencil. Measure up from bottom and down from top. Mark locations with a pencil.
STEP 05 Caulking the inside Fascias Caulk inside both fascias stay inch away from end of both fascias. Down both corners, up & down the front and back and squiggly lines on the bottom.
tio Cover STEP O06 -A Inserting the FRONT FASCIA SPLICE for 12” SPLICE Insert the FASCIA SPLICE in half way 6” as shown. Push the SPLICE down into the caulking and fasten using the #8 tek screws thru FRONT FASCIA into the SPLICE where marked on both sides. STEP O06 -B Inserting the FRONT FASCIA SPLICE for 30” SPLICE Insert the FASCIA SPLICE in half way 15” as shown. Push the SPLICE down into the caulking and fasten using the #8 tek screws thru FRONT FASCIA into the SPLICE where marked on both sides.
tio Cover STEP 07 Fastening the FRONT FASCIA SPLICE Make sure both pieces of FRONT FASCIA are straight. Then slide in the second FASCIA and fasten with screws on the marks ON THE BACK AND FRONT of FASCIA. STEP 08 Caulking the FRONT FASCIA SPLICE Caulk inside the FRONT FASCIA at the ends of the SPLICE & going up, the front and back sides. Caulk all the screws protruding inside the fascia and the SPLICE.