Use and Care Manual

CARE AND MAINTENANCE OF PAINTED ALUMINUM

Cleaning Tips:

In addition to their enduring good looks, Integra Patios are easy to maintain.

Airborne pollutants, however, such as emissions from autos and local

manufacturing plants, can cause an acidic build-up on any baked enamel product

surface. This can easily be removed by periodic cleaning with any household

detergent. Simply mix a few teaspoons of dishwashing liquid in a bottle or hose

sprayer and apply liberally to all exposed surfaces, then rinse freely.

CAUTION: DO NOT USE ABRASIVE OR SOLVENT-TYPE MATERIALS OR PAINT

REMOVER. THOSE MATERIALS MAY SOFTEN OR REMOVE YOUR BAKED ENAMEL

FINISH.

To Remove Mildew: Black spots on the surface of your aluminum product may be

caused by mildew. Watch carefully for it, especially on protected surfaces, such as

beneath eaves or in patio enclosures. To eliminate mildew, prepare and apply the

following solutions:

1/3 cup detergent (i.e. Tide®)

2/3 cup tri-sodium phosphate (i.e. Soilax®)

3 quarts of water

1 quart 5% sodium hypochlorite (i.e. Clorox®)

Mix ingredients together and apply with sponge or cloth to mildewed areas. Wear

protective gloves and avoid contact with skin.

CAUTION: GREATER CONCENTRATIONS MAY CAUSE DAMAGE TO ALUMINUM

FINISH. AVOID SKIN CONTACT. FOLLOW INSTRUCTIONS FOR CLEANING AND

RINSING GIVEN ABOVE UNDER “CLEANING TIPS”.

PAGE 1
CARE AND MAINTENANCE OF PAINTED ALUMINUM Cleaning Tips: In addition to their enduring good looks, Integra Patios are easy to maintain. Airborne pollutants, however, such as emissions from autos and local manufacturing plants, can cause an acidic build-up on any baked enamel product surface. This can easily be removed by periodic cleaning with any household detergent. Simply mix a few teaspoons of dishwashing liquid in a bottle or hose sprayer and apply liberally to all exposed surfaces, then rinse freely.