Owner's Manual

10
Front & Rear Panels—Continued
For detailed information, see the pages in parentheses.
a Speaker/channel indicators
Indicate the speaker channels used by the current
listening mode.
The following abbreviations indicate which audio
channels are outputted for the current listening
mode.
b Listening mode and format indicators (79)
Show the selected listening mode and audio input
signal format.
Audyssey (51, 93):
Flashes during Audyssey MultEQ® Room Correc-
tion and Speaker Setup. Lights when the “Equalizer
Settings” is set to “Audyssey” or
Audyssey Dynamic Surround Expansion™ listen-
ing mode is selected.
Dynamic EQ (97):
Lights when “Dynamic EQ” is enabled.
Vol (97):
Lights when “Dynamic Volume” is enabled.
c NETWORK indicator (116)
Lights when the Net input selector is selected.
d Tuning indicators
AUTO (62):
Lights when Auto Tuning mode is selected for AM
or FM radio. Goes off when Manual Tuning mode is
selected.
TUNED (62):
Lights when tuned to a radio station.
FM STEREO (62):
Lights when tuned to a stereo FM station.
e SLEEP indicator (59)
Lights when the Sleep function has been set.
f Bi AMP indicator (48)
Lights when the “Speakers Type(Front)” setting is
set to “Bi-Amp”.
g Headphone indicator (59)
Lights when a pair of headphones are plugged into
the Phones jack.
h Message area
Displays various information.
i Audio input indicators
Indicate the type of audio input that’s selected as the
audio source: HDMI, ANALOG, or DIGITAL.
j Volume level (57)
Displays the volume level.
k MUTING indicator (59)
Flashes while the AV controller is muted.
Display
beda
f
gh
j
k
i
c
LW: Front wide left
LH: Front high left
RH: Front high right
RW: Front wide right
FL: Front left
C: Center
FR: Front right
SL: Surround left
SW: Subwoofer (Low Frequency Effects)
SR: Surround right
SBL: Surround back left
SB: Surround back
SBR: Surround back right