Owner's Manual

109
Advanced Setup—Continued
HDMI Control (RIHD) On: enabled.
Off: disabled (default).
This function allows -compatible components connected via HDMI to be controlled with the AV
controller.
Notes:
• , which stands for Remote Interactive over HDMI, is the name of the system control function found
on Integra/Onkyo components. The AV controller can be used with CEC (Consumer Electronics Control),
which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability
between various components, however, operation with components other than -compatible compo-
nents cannot be guaranteed.
When set to “On” and close the menu, the name of connected -compatible components and
“RIHD On” are displayed on the AV controller.
“Search…”
→ “(name)” → “RIHD On”
When the AV controller cannot receive the name of the component, it is displayed as “Player*” or
“Recorder*”, etc (“*” means the number of two or more component).
When set to “Off” and close the menu, “RIHD Off” are displayed on the AV controller.
“Disconnect” → “RIHD Off”
• Set it to “Off” when a connected piece of equipment is not compatible or it is unclear whether the equipment
is compatible or not.
• Set it to “Off” if the operation is not successful.
• Refer to the connected component’s instruction manual for details.
• The control does not support HDMI OUT SUB. Use HDMI OUT MAIN instead.