Owner's Manual

14
Remote Controller—Continued
For detailed information, see the pages in parentheses.
a Standby button (39)
Sets the AV controller to Standby.
b On button (39)
Turns on the AV controller.
c Activities buttons (60, 142)
Used with the MACRO function.
d Remote Mode/Input Selector buttons
(57, 134 to 140)
Selects the remote controller modes and the input
sources.
e Arrow [q]/[w]/[e]/[r] and Enter buttons
Used to select and adjust settings.
f Setup button
Used to change settings.
g Listening Mode buttons (79)
Used to select the listening modes.
h Dimmer button (58)
Adjusts the display brightness.
i Display button (58)
Displays information about the current input source.
j Muting button (59)
Mutes or unmutes the AV controller.
k VOL [q]/[w] button (57)
Adjusts the volume of the AV controller regardless
of the currently selected remote controller mode.
l Video button (40, 44, 101)
Used to change video settings.
m Return button
Returns to the previous display when changing set-
tings.
n Audio button (112)
Used to change audio settings.
When the “Audio TV Out” setting is set to “On”
(page 107), this button is disabled.
o Sleep button (59)
Used with the Sleep function.
Controlling the AV Controller
To control the AV controller, press the [Receiver] but-
ton to select Receiver mode.
You can also use the remote controller to control your
DVD/BD player, CD player, and other components.
See pages 130 to 142 for more details.
b
a
g
1
f
e
h
2
5
j
3
4
l
k
m
n
o
d
c
*1
*2
i
*1 When you want to change the remote controller mode without
changing the current input source, press the [Mode] button and
within about eight seconds, press the Remote Mode button.
Then, with the AV controller’s remote controller, you can con-
trol the component corresponding to the button you pressed.
*2 SP Layout button is not used for this model.