Owner's Manual

52
First Time Setup—Continued
Using Audyssey MultEQ
®
1
Turn on the AV controller and the
connected TV.
On the TV, select the input to which the
AV controller is connected.
Enter
On/Standby
qwer
Speaker setup
microphone
Notes:
• If the AV controller is muted, it will be unmuted
automatically when Audyssey MultEQ Room
Correction and Speaker Setup starts.
• Room correction and speaker setup cannot be
performed while a pair of headphones is
connected.
• It takes about 30 minutes to complete the room
correction and speaker setup for six positions.
Total measurement time varies depending on the
number of speakers.
• Do not disconnect the speaker setup microphone
during the room correction and speaker setup,
unless you want to cancel the setup.
• Do not connect or disconnect any speakers during
the room correction and speaker setup.
2
Set the speaker setup micro-
phone at the Main Listening Posi-
tion
1 (page 51), and connect it
to the Setup Mic jack.
The speaker setting menu appears.
If you change “Speakers Type(Front)”
settings, refer to step 4 on “Speaker
Settings” (page 48).
In accordance with the connected
speakers, set the “SurrBack Preout”
setting to “SurrBack”, “FrontHigh” or
“FrontWide”.
3
When you’ve finished, press the
[Enter] button.
Notes:
• Before starting Audyssey MultEQ
Room Correction and Speaker Setup,
arrange the room and connect the
speakers as you would for enjoying
movies. Changes to the room after
auto setup requires you run the auto
setup again, as room EQ
characteristics may have changed.
• When starting the room correction
and speaker setup, do not stand
between the speakers and
microphone, and avoid obstacles
blocking the path between speakers
and microphone. This will produce
inaccurate results.
• Position the microphone at ear height
of a seated listener with the
microphone tip pointed directly at
the ceiling using a tripod. Do not
hold the microphone in your hand
during measurements as this will
produce inacurate results.
• Make the room as quiet as possible.
Background noise can disrupt the
room measurements. Close
windows, silence cell phones,
televisions, radios, air conditioners,
fluorescent lights, home appliances,
light dimmers, or other devices.
MultEQ: Auto Setup
Speakers Type(Front)
SurrBack Preout
Normal
SurrBack
MultEQ: Auto Setup
Please place setup microphone at
center of listening area
at ear height.
Next