Owner's Manual

77
Listening to the Radio—Continued
■ Category Search Mode
■ Direct Tuning
You can select an XM radio channel directly by entering
its number.
Selecting Channels on the AV controller:
Selecting the Previous Channel:
1
Press the [Receiver] Remote
Mode button, and then press the
[Enter] button repeatedly to
select Category Search mode.
This procedure can also be performed
on the AV controller by using its
[Tuner] button, and [Tuning Mode] but-
ton.
2
Use the Left and Right [e]/[r]
buttons to select a category, and
use the Up and Down [q]/[w] but-
tons to select a channel in that
category.
1
Press the [Receiver] Remote
Mode button, followed by the
[D.TUN] button.
The [Receiver] button flashes.
2
Within 8 seconds, use the num-
ber buttons to enter the channel
number.
For example, to select channel #20,
press 0, 2, 0, or 2, 0, [Enter].
Note:
While the [Receiver] button is flashing,
you cannot select another input source
with the remote controller.
Remote
controller
Receiver
Enter
Enter
Remote
controller
Receiver
D.TUN
Clear
12
D.TUN
0
Clear
123
456
789
VCR / DVR CBL / SAT
DVD
Tape
Tuner
CD
Game / TV
AUX 1 AUX 2
1
AV controller
Press the [Tuning Mode] button
repeatedly to select Channel
Search mode or Category Search
mode.
2
AV controller
Press [Enter] repeatedly to select
a category.
3
AV controller
Use the Tuning Up and Down
[q]/[w] buttons to select a chan-
nel.
In Channel Search mode, you can
select any channel.
In Category Search mode, you can only
select channels from the currently
selected category.
To listen to the previously
selected XM channel, press the
[Return] button.
R
e
t
u
r
n
Remote
controller
AV controller