Owner's Manual

Integra Division of
18 park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: [phone] Fax: [phone]
http://www.integrahometheater.com
Integra Division of
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY
Tel: [phone] Fax: [phone]
http://www.integra.eu
Integra Division of
1301, 555 Tower, No.555 West NanJin Road, Jin an,
Shanghai,
China 200041, Tel: [phone] Fax: [phone]
http://www.integra.com.cn
Integra Division of
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku,
OSAKA 541-0041, JAPAN
Tel: [phone] Fax: [phone]
http://www.integraworldwide.com
* 2 9 4 0 1 8 0 8 *
D1405-0
E n
SN29401808
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.
COAXIAL jack
Connect a separately sold cable to
input the sound.
OPTICAL jack
Connect the supplied optical
digital audio cable to input audio.
ANALOG jack
Connect the supplied stereo mini
plug cable to input audio.
IR IN jack
Connect a separately sold IR control
system to allow the remote control
signal to pass through.

When you connect an IR control
system to this unit, remote control
sensor of the front panel of the
unit is disabled.
USB port
Connect a USB flash drive.
3
4
1
1
2
2 3 4 5 6 7 8 9
PREPARATION
Placement
Select an appropriate placement for your environment.
Place the supplied wireless subwoofer in an appropriate place for your use
environment.

To enjoy the best sound, do not place an object on both sides of the unit.
Place the supplied wireless subwoofer within the 33 feet (10 m) distance.
Mounting to Wall
Refer all servicing to qualified service personnel.
Accessories to be prepared: Wall mounting template
PACKAGE CONTENTS
Make sure you have the following items before use.

The number in parenthesis indicates the quantity.

In catalogs and on packaging, the letter at the end of the product name
indicates the color.
Main unit (SBD41) (1) AC adapter (1)/Power cord (1)
Remote controller (RC-887S) (1)
A lithium-ion battery (CR2025) is supplied in
the remote control at the time of purchase.
Optical digital audio
cable 5 ft. (1.5 m) (1)
ф3.5 mm stereo mini
plug cable (1)
Wall mounting template (1) Stand (2)/Cushion (4)/
Mounting screws (3/8" (10 mm)) (4)
Wireless subwoofer (SKW41) (1)/
Power cord (Polarized plug) (1)/
Cushion (4)
DLB-40.6
Soundbar System
Instruction Manual
1. Attach the template to the position to mount.

Be careful not to make a tape mark on the wall.

Stand at a distance and check its position. Check if it is horizontal.
2. Mark the two screw points with a pen.

Leave 1" (25 mm) between the soundbar and your TV.
3. Remove the template and screw the screws into the wall.

Use the screws with 3/16” (4 mm) diameter.

Keep 5/16” (8.5 mm) of the screw protruding from the wall surface.

Do not use the supplied mounting screws for stand.
Wall
5/16” (8.5 mm)
3/16” (4 mm)
4. Connect all cables to the soundbar.
(o See 7 to 8 pages)
5. Insert the head of the screw into the keyhole slot of the soundbar and fix it
firmly.

Please confirm that the head of the screw is at the top of the hole.

Do not use the supplied stands.
Keyhole slot
Mounting on Low Board or TV Stand
Accessories to be prepared: Stands, Cushion, Mounting screws
Before placing the soundbar on the boards, attach the supplied stands to prevent
falling.
(Back side)
(Front side)
Connections
Connect the TV and this unit using one of the connection cables of the following.

We recommend using the supplied optical digital audio cable or a separately
sold digital coaxial cable for digital connection.
Wireless Subwoofer
1
2
(Bottom)
Cushion
Listening to TV
Turn on the TV.

For details on operation, see the "BASIC OPERATION" (o P.11).

The unit can be operated with your existing TV remote controller. For details
on operation, see the “Using TV Remote Controller” (o P.17).
1
23
1. Turn the power on.
2. Switch the input to TV.
(On the buttons of the unit, switches
in the order of
TV o USB o
Bluetooth.)
3. Adjust the volume.
1
3
2
Please note:

When preparing the screws used for wall mounting, ask qualified service personnel
and give careful consideration to their type, material and length so that they can
withstand the weight. If reinforcement is necessary, use reinforcing plates or anchors.

Onkyo is not responsible for accidents or damage caused by improper installation,
insufficient wall strength, improper screw installation or natural calamity, etc.
Thank you for purchasing an Integra product. Please read this manual thoroughly before
making connections and plugging in your new Integra product.
Following the instructions in this manual will enable you to obtain optimum performance and
listening enjoyment from your new product.
Please retain this manual for future reference.
Trademarks and Licensing
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Onkyo is under license. Other trademarks and trade
names are those of their respective owners.
AuraSphere™ is a trademark of Onkyo Corporation.
AuraSphere is a listening experience technology developed by Onkyo
Corporation and Sonic Emotion ag.
lntegra
[I]
DOLBY
DIGITAL
0 Bluetooth·
en AURASPHERE
I IIIIII IIIII IIIII I 11111111111111111 11111111111
II
I
~-~
)__-=---., __
-- ~ · \.
1@1 ~
! ~ j C.
: @, j l
I \: ::) -
·- ---
u
□
c:irv
AltALOG
DCIN
21V3.D9A ...111111... ~
e----@----(f) ~ '\
~ ~
"
'
~-
u
□
~
I
D ---::::::::::r -
. .
I f" I
\ ! t0 ! IRIN
-- \I W:
·-- .
-
use
0
Onkyo U.S.A. Corporation
Onkyo Europe Electronlcs GmbH
.J. ~ 1
: ta ~: -::) .-;--:
L .. , ,_ . _.. ._/ • ,
Onkyo China PRC
'0+ -.
I I
- : ~- I
:·_~.✓ :: : 0 :
~~~ L--- ....... <!_~~•
~-~ ·,_::,,.
·-;: ::_► 11 1_) :'-·':
Onkyo Corporation
lntegra
---- ""'~ -- ~
------------- ,~