Owner's Manual

18
Note
• Do not place the DMI-40.4 on top of a component
that gets warm or one with has air vents on top, as
it may interfere with that component’s cooling or
cause the component or DMI-40.4 to overheat.
Place it next to the component, use an audio rack,
etc.
Caution
• Connect the supplied u cable to only u jacks.
Do not connect headphones to the u jack, as it
will damage your equipment.
■ Inserting Your iPod/iPhone/iPad into the
DMI-40.4
Insert your iPod/iPhone/iPad into the DMI-40.4 as
shown below.
Now, you can enjoy music/video from
iPod/iPhone/iPad.
Note
• To prevent dock connector damage, don’t twist
your iPod/iPhone/iPad when inserting or removing
it, and be careful not to knock your
iPod/iPhone/iPad while it’s inserted.
• Don’t use your iPod/iPhone/iPad with any other
accessories, such as FM transmitters and
microphones, because they may cause a
malfunction.
1
Using the supplied AV cable, connect the
DMI-40.4’s AUDIO OUT L/R jacks to a audio
input on your Integra/Onkyo amp or AV
receiver. And if your iPod/iPhone/iPad
supports TV out, connect the DMI-40.4’s
VIDEO OUT jack to a composite video input on
your Integra/Onkyo amp, AV receiver or TV.
2
Using the supplied u cable, connect the
DMI-40.4’s u jack to an u jack on your
Integra/Onkyo amp or AV receiver.
3
Connect the supplied AC adapter to the
DMI-40.4’s DC IN 5V 3A jack, and plug the AC
adapter into a suitable wall outlet.
iPod/iPhone/iPad