Owner's Manual

19
Connecting the DPC-7.9 —Continued
This section explains how to connect the DPC-7.9 to
your TV or projector.
See page 21 for connecting a TV or projector that
supports HDMI.
In this hookup example, the TV handles the audio and
video. To enjoy Dolby Digital or DTS (surround), you’ll
need a compatible decoder (see page 20).
The DPC-7.9 has four types of video output: HDMI,
component video, S-Video, and composite video .
HDMI offers the best picture quality, so if your TV sup-
ports it, see page 21. Component video offers the next
best picture quality, so if your TV supports it, use a com-
mercially available component video cable to connect
the DPC-7.9’s COMPONENT VIDEO OUTPUT to the
component video input on your TV. If your TV supports
progressive scanning, you must use component video in
order to take advantage of that feature. S-Video offers
better picture quality than composite video, so if your
TV supports it, use the S-Video cable to connect the
DPC-7.9’s S VIDEO OUTPUT to an S-Video input on
your TV. Failing that, use the supplied composite video
cable to connect the DPC-7.9’s VIDEO OUTPUT to a
composite video input on your TV.
Compatibility of this unit with progressive-scan TVs.
This player is compatible with progressive video Macro
Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CON-
NECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARD-
ING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Connecting Your TV or Projector
Y
IN
P
B
PR
L
R
ANALOG
INPUT
S VIDEO IN
VIDEO IN
S-Video cable*
2
AV RCA/
phono cable
(supplied)*
1
(yellow)
(yellow)(white)
(white)
(red)
Component
video cable*
3
TV or projector
(red)
Only one connection
required! Choose
component video,
S-Video, or
composite video.
*1 The DPC-7.9 has two composite
video output connectors and two
pairs of stereo analog audio output
connectors. They output the same
video and audio signals respectively.
*2 The DPC-7.9 has two S-Video out-
put connectors. They output the
same video signal.
*3 The DPC-7.9 has two component
video outputs. The COMPONENT 1
output uses RCA/phono connectors.
The COMPONENT 2 output uses
BNC connectors. They output the
same video signal.
DPC-7.9_En.book Page 19 Tuesday, July 22, 2008 4:37 PM