Super Audio CD & DVD Audio/Video Changer DPC-8.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Precautions DANGER: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT STARE INTO BEAM. FCC INFORMATION FOR USER CAUTION: The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Precautions—Continued 1. Region Numbers The DVD standard uses region numbers to control how discs can be played around the world, the world being divided into six regions. This unit will only play DVD discs that match its region number, which can be found on its rear panel (e.g., ). 2. About this Manual This manual explains how to use all of this unit’s functions.
Thank you for purchasing an Integra DVD Changer. Read this manual carefully before using your new DVD Changer. A good understanding of its features and operation will allow you to achieve optimum performance and enjoyment. Important Safety Instructions........ 2 Precautions ..................................... 3 Keep this manual for future reference. Introduction..................................... 7 Before Using the DPC-8.5 ............ 13 Getting to Know the DPC-8.5.......
Contents Precautions................................................. 3 Introduction ................................................ 7 Supplied Accessories................................ 7 DPC-8.5 Features ..................................... 8 Disc Notes................................................. 9 Terminology ............................................ 11 Before Using the DPC-8.5........................ 13 Installing the Remote’s Batteries ............ 13 Using the Remote Controller.............
Introduction Supplied Accessories Make sure you have the following accessories: S-Video connecting cable (5 ft.) RC-543DV remote controller & two AA-size batteries AV connecting cable (5 ft.) cable (2.6 ft.) This cable is used to connect the DVD player to other -compatible Integra components for (Remote Interactive) control. To use , in addition to an connection, you must make an analog audio connection (RCA) between the DVD player and your Integra AV receiver.
Introduction—Continued DPC-8.
Introduction—Continued Disc Notes Supported Discs The DPC-8.5 supports the following discs. Disc Logo • Don’t use discs that have residue from adhesive tape, rental discs with peeling labels, or discs with custommade labels or stickers. Doing so may damage the DPC-8.5 and you may not be able to remove the disc properly. Format or file type DVD Region Numbers DVD-Video DVD-Video DVD-Audio DVD-Audio SACD Super Audio CD (single layer, dual layer, hybrid) The DPC-8.
Introduction—Continued Disc Content Organization ■ DVD-Video DVD-Video discs typically contain one or more titles, which may be subdivided into chapters. Title 1 Chapter 1 ■ JPEG JPEG discs contain pictures organized into folders. The DPC-8.5 handles JPEG files as tracks. Folder 1 Track 1 Track 2 Folder 2 Track 3 Track 1 Track 2 Title 2 Chapter 1 Chapter 2 Chapter 2 JPEG (CD-R/RW) MP3 & JPEG Compatibility DVD-Video ■ DVD-Audio DVD-Audio discs contain groups and tracks.
Introduction—Continued Handling Discs Terminology • Never touch the underside of a disc. Always hold discs by the edge, as shown. ■ CD-R (compact disc recordable): A type of CD that can be recorded only once. Can be used for VCD, CD, MP3, or JPEG. Underside • Never attach adhesive tape or sticky labels to discs. Cleaning Discs • For best results, keep your discs clean. Fingerprints and dust can affect the sound or picture quality and should be removed as follows.
Introduction—Continued ■ DVD-RW (DVD rewritable): A type of DVD disc that can be recorded over and over again. Can be used for DVD-Video or DVD-Audio. ■ S-Video: A video connection format that separates the luminance (Y) and color (C) signals, providing better picture quality than composite video. ■ DVD-Video: The format for storing MPEG2 video on DVD, with interactive menus, multiple soundtracks, subtitles, camera angles, and so on.
Before Using the DPC-8.5 Installing the Remote’s Batteries 1 Open the battery compartment, as shown. Using the Remote Controller To use the remote controller, point it at the DPC-8.5’s remote control sensor, as shown below. Remote control sensor DPC-8.5 2 Insert the two supplied batteries (AA) in accordance with the polarity diagram inside the battery compartment. 30˚ ) 5 30˚ . ox pr 16 ( ft. m Ap 3 Close the battery compartment.
Getting to Know the DPC-8.5 Front Panel A B 3 4567 8 9 J K Standby/On Standby L For detailed information, refer to the pages in parenthesis. A Standby/On button (27) This button is used to set the DPC-8.5 to On or Standby. Don’t turn on the DPC-8.5 until you’ve completed and double checked all of your connections (page 20). B Standby indicator (27) This indicator lights up when the DPC-8.5 is in Standby mode.
Getting to Know the DPC-8.5—Continued Display 4 1 23 CHAIN M DISC AC E 567 8 9 0 B D CD DVD ALL F G MEMORY RANDOM LAST M V.OFF PRGSV CHP TRACK TOTAL REMAIN REPEAT A - B TITLE GROUP PBC H IJK JPEG D PL MP3 DVD - AUDIO SACD V C D DISC 1 2 3 4 5 6 L M For detailed information, refer to the pages in parenthesis. 1 DISC indicator (30) The number of the currently selected disc appears here.
Getting to Know the DPC-8.5—Continued J Play indicator (31) This indicator is shown during playback. K Pause indicator (31) This indicator appears when playback is paused. L Title & group number Title and group numbers appear here. M Chapter & track number Chapter and track numbers appear here. N Time display Time information, such as total time, remaining time, and so on, is displayed here in hours, minutes, and seconds. Other messages are also displayed.
Getting to Know the DPC-8.5—Continued G RS232 port This bidirectional RS-232 port can be connected to an external controller. H AC INLET (26) The supplied power cord should be connected here. I OPTICAL DIGITAL AUDIO OUTPUT (24) This optical digital audio output can be connected to an optical digital audio input on a hi-fi amp, AV receiver, or surround sound decoder (Dolby Digital, DTS). The Digital Out/Digital1 setting on page 56 is used to configure this output.
Getting to Know the DPC-8.
Getting to Know the DPC-8.5—Continued T Display button (48) This button is used to display information about the current disc, title, chapter, group, or track, including the elapsed time, remaining time, total time, and so on. U Clear button (33, 36, 46) This button is used to cancel functions and to clear entered numbers. V Menu button (32) This button is used to show DVD menus.
Connecting the DPC-8.5 RCA AV Connection Color Coding This chapter explains how to connect the DPC-8.5 to your other AV components. RCA-type AV connections are usually color coded: red, white, and yellow. Use red plugs to connect right-channel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and outputs (typically labeled “L”). And use yellow plugs to connect composite video inputs and outputs.
Connecting the DPC-8.5—Continued Audio Optical digital audio connections can carry Dolby Optical digital OPTICAL Coaxial digital COAXIAL Digital or DTS multichannel digital audio (DVD-Video, DVD-Audio) or stereo digital audio (DVD-Video, DVD-Audio, SACD, VCD, CD, MP3). L Analog Coaxial digital audio connections can carry Dolby Digital or DTS multichannel digital audio (DVD-Video, DVD-Audio) or stereo digital audio (DVD-Video, DVD-Audio, SACD, VCD, CD, MP3).
Connecting the DPC-8.5—Continued S VIDEO IN TV or projector S-Video cable (supplied) Y COMPONENT PB PR VIDEO IN L IN Y R (red) ANALOG INPUT PB (yellow) (white) PR Component video cable AV cable (supplied) Only one connection required! Choose component video, S-Video, composite, or BNC video. (red) (white) (yellow) L R Notes • Before making any connections, turn off the DPC-8.5 and your TV and disconnect their power cords from the wall outlets.
Connecting the DPC-8.5—Continued Analog Audio Connection (Dolby Digital, DTS, DVD-Audio & SACD) Connecting an AV Receiver This section shows how to connect the DPC-8.5 to an AV receiver for Dolby Digital, DTS, DVD-Audio, and SACD playback. Digital Audio Connection (Dolby Digital & DTS) To fully enjoy the Dolby Digital and DTS soundtracks available on most DVD-Video discs, you need to connect one of the DPC-8.
Connecting the DPC-8.5—Continued Connecting a Stereo Amp This section explains how to connect the DPC-8.5 to a stereo amp or receiver for sound quality better than that possible with most TV’s built-in speakers. This is great for listening to your CDs and MP3s, and DVDs and VCDs will sound better too. You can also enjoy Dolby Surround, if your amp supports Dolby Pro Logic. digital noise may be heard, which may damage your equipment.
Connecting the DPC-8.5—Continued Controlling Components That Are Out of Range You can use the following multiroom kits to control the DPC-8.5 when it’s out of range of the remote controller: • Onkyo Multi-Room System (IR Remote Controller Extension System) • Multiroom AV distribution and control systems such as those made by Niles and Xantech.
Connecting the DPC-8.5—Continued Connecting the Power Cord Notes: • Before connecting the power cord, complete all of the necessary audio and video connections. • Do not use a power cord other than the one supplied with the DPC-8.5, which is designed exclusively for use with the DPC-8.5 and should not be used with any other component. • Never disconnect the power cord from the DPC-8.5 while the other end is still plugged into a wall outlet. Doing so may cause an electric shock.
Turning On the DPC-8.5 & First Time Setup On Standby Standby/On On The very first time you turn on the DPC-8.5, the Initial Setup menu appears onscreen. Standby Standby/On Search First Time Setup Open/ Close Last M Memory Chain Mode Repeat Standby 1 2 3 4 5 6 7 8 9 +10 0 Clear A-B Random Display Menu Top Menu Enter Enter Return Standby indicator Audio Setup Angle Subtitle Stop FR Play FF Down Pause Up Turning On the DPC-8.
Turning On the DPC-8.5 & First Time Setup—Continued 3 Remote controller Enter On the Analog Audio Out menu, use the Up and Down [ ]/[ ] buttons to select 2 Channel or Multi Channel (default), and then press [Enter]. Choose 2 Channel if you’re connecting the FRONT AUDIO OUTs to a stereo amp. Choose Multi Channel if you’re connecting the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTs to a multichannel amp. If you select 2 Channel, the setup is complete and the Initial Setup menu closes.
Basic Playback Open/Close Disc Select 4 When you’ve finished, press the Open/Close [ ] button again. The disc tray closes. Standby/On See page 30 for information on selecting and playing discs. Standby Remote controller Disc Skip Play/Eenter Open/Close On Open/ Close Tip: If you press the Play [ ] button, the disc tray will close and playback of the disc in the right bay will start automatically. If there is no disc in that bay, the DPC-8.
Basic Playback—Continued Open/Close Disc Select 3 When you’ve finished, press the Open/Close [ ] button again. The disc tray closes. Standby/On Playback of the current disc continues uninterrupted until you either stop playback or select another disc. Standby Remote controller Open/ Close Disc Skip Open/Close On Tip: If you press one of the Disc Select 1–6 buttons, the disc tray will close, playback of the current disc will stop, and playback of the newly selected disc will start automatically.
Basic Playback—Continued Notes: • The type of disc currently selected is shown on the display: DVD, DVD-AUDIO, SACD, VCD, or CD (see page 15). • You can select discs while the DPC-8.5 is stopped or during playback. • You can use the [Disc Skip] button to skip the current disc and start the next disc. If disc #6 is the current disc, disc #1 will be selected next. ■ Pause Remote controller Pause To pause playback, press the Pause [ ] button. Playback pauses and the Pause indicator appears on the display.
Basic Playback—Continued Play/Enter 2 Remote controller Standby/On Standby Enter On If you select a playback option (e.g., subtitles), another menu of options will typically appear, in which case you use the remote controller’s arrow buttons to select items and the [Enter] button to confirm your choice.
Basic Playback—Continued Play/Enter 3 Remote controller Standby/On Standby If you want to select a title, press the Left [ ] button to move the cursor to the current title number. Enter Entered title number appears here On Standby Search Search Open/ Close Last M Memory Chain Mode Number buttons 1 2 3 4 5 6 A-B Remote controller Random 7 8 9 +10 0 Clear Display Clear Enter 4 Repeat 1 2 3 Use the number buttons to specify a chapter or title.
Basic Playback—Continued For JPEG files, a thumbnail-size preview appears along with File Size and Date Created information. Play/Enter Standby/On During playback, the following information is displayed in the upper-right corner: folder number, file number, elapsed time, and if the current file is in the playlist, its playlist number. The Title, Artist Name, and Album Name information is also displayed.
Basic Playback—Continued 5 Press the Stop [ ] button to stop playback. Remote controller Stop To add an entire folder of files to the playlist, select the folder at the top of the Track list, and then press [Enter]. The folder number followed by “ALL” will appear in the playlist. Notes: • If the selected JPEG file’s resolution is 640 x 480 pixels, a thumbnail-size preview will be shown. If the resolution exceeds 640 x 480, a preview will only be shown if the file contains thumbnail image data.
Basic Playback—Continued Play/Enter 3 Remote controller Standby/On Standby On 2 3 4 5 6 7 8 9 +10 0 For example, to enter “11,” press the [1] button followed by the [1] button. Standby Search Search 1 Use the number buttons to enter a track number. For example, to enter “5,” press the [5] button. Open/ Close Last M Memory Chain Mode Repeat Number buttons 1 2 3 A-B 4 5 6 7 8 9 +10 0 Clear Random Display Menu Top Menu To clear a number, press the [Clear] button.
Basic Playback—Continued Fast Forward & Reverse DVD-A DVD-V SACD DVD-VR VCD CD Frame-by-Frame Playback MP3 This section explains how to fast forward and reverse. ■ Fast forward Remote controller FF During playback, press the FF [ ] button to start fast forward. Playback fast forwards and “Fast Forward1” appears onscreen. To change the fast-forward speed, press the FF [ ] button repeatedly to cycle through the speeds: Fast Forward1, Fast Forward2, and so on.
Basic Playback—Continued Dimmer Play/Enter ■ Resume To resume normal playback, playback press the Play [ ] button. Remote controller Standby/On Play Standby On Notes: • There are four slow motion speeds for DVD-Video/ DVD-VR and three for VCD. • Backward slow-motion playback does not work with VCDs and DVD-VR discs. • No sound is output during slow-motion playback.
Basic Playback—Continued Stop 2 Remote controller Standby/On Standby Enter Chain Mode Play/Enter 3 Remote controller On Standby Search Chain Mode Menu Enter Open/ Close Last M Memory Chain Mode Repeat 1 2 3 4 5 6 7 8 9 +10 0 Clear To open a folder, use the Up and Down [ ]/[ ] buttons to select it, and then press [Enter]. The Track list shows the images and subfolders in the currently open folder.
Basic Playback—Continued 6 To stop the slideshow, press the Stop [ ] or [Menu] button. Depending on the type of JPEG disc, either the first nine pictures appear in thumbnail-size or the Disc Navigator appears. Remote controller Stop Using Chain Mode DVD-V DVD-A DVD-VR VCD CD MP3 In Chain mode you can play all discs sequentially. 1 Press the [Chain Mode] button repeatedly to select CD, DVD, or ALL. The CHAIN M indicator flashes on the display.
Advanced Playback Repeat Play/Enter 3 Press the Play [ ] button to start playback from the specified point.
Advanced Playback—Continued 2 Remote controller Press the Play [ ] button to start repeat playback. A–B Repeat Playback DVD-V DVD-A SACD DVD-VR VCD CD Play With the A–B Repeat function you can play a specified section over-and-over again. 3 Remote controller Repeat To cancel repeat playback, use the [Repeat] button to select Off. If you’re using the Repeat function with the Disc Navigator (MP3/JPEG), the Repeat function is off when the MODE: field is blank.
Advanced Playback—Continued Random Playback DVD-V DVD-A SACD VCD CD 4 MP3 JPEG With the Random function you can enjoy a random selection of discs, titles, chapters, groups, tracks, or folders. 1 Select a disc. See page 30. 2 Press the [Random] button repeatedly to select a random option. The currently selected random option appears onscreen and “RANDOM” appears on the display.
Advanced Playback—Continued On Search Open/ Close Last M Memory Chain Mode Repeat 1 Number buttons You can enter numbers directly by using the remote controller’s number buttons.
Advanced Playback—Continued 6 Remote controller To stop playback, press the Stop [ ] button. Deleting Items from the Memory List 1 Stop Remote controller Memory Inserting New Items into the Memory List 1 Remote controller Memory 2 Remote controller Enter 3 Remote controller Press the [Memory] button. The Memory Play Setup window appears onscreen. 2 Remote controller Enter Use the Left or Right [ ]/[ ] button to move the cursor from the top row.
Advanced Playback—Continued Changing Items in the Memory List 1 Remote controller Memory 2 Remote controller Enter 3 Remote controller Press the [Memory] button. The Memory Play Setup window appears onscreen. Use the Left or Right [ ]/[ ] button to move the cursor from the top row. You must move the cursor away from the top row. Use the Up and Down [ ]/[ ] buttons to select the item that you want to change. Enter 4 Use the Left or Right [ ]/[ ] button to move the cursor to the top row.
Advanced Playback—Continued Random Remote controller 7 8 9 +10 0 Clear Display Menu Top Menu Subtitle Enter Return Audio Audio Setup Angle Subtitle Stop Play Pause FR FF Down Disc 1 Disc 2 Disc 3 Step/Slow Disc 4 Disc 5 Disc 6 Disc Skip Progressive Subtitle Dimmer RC-543DV Selecting Languages & Audio Formats DVD-V DVD-A VCD SACD Some DVD-Video discs feature soundtracks in several languages and audio formats (e.g., Dolby Digital or DTS).
Advanced Playback—Continued 3 Standby/On To resume playback, select the disc and press the Play [ ] button. The Last Memory dialog box appears, as shown.
Advanced Playback—Continued ■ DVD-Video Condition Normal Onscreen No display DPC-8.5 Display Elapsed title time 1st press Current/total title number, elapsed title time, remaining title time, total title Remaining title time time, selected soundtrack, selected subtitle, number of camera angles. 2nd press Current/total chapter number, elapsed Elapsed chapter chapter time, remaining chapter time, time total chapter time, bit rate.
Advanced Playback—Continued ■ VCD & CD Condition Normal Onscreen No display DPC-8.5 Display Elapsed track time 1st press Current/total track number, elapsed track time, remaining track time, total track time. Remaining track time 2nd press Current/total track number, elapsed disc time, remaining disc time, total disc time. Elapsed disc time 3rd press 4th press Same as for 2nd press Remaining disc time No display Elapsed track time ■ MP3 Condition Onscreen DPC-8.
Advanced Playback—Continued Turning Off the Video Circuits You can turn off all of the internal video circuitry, eliminating the possibility of interference, for a pure-audio experience when playing audio-only discs. 1 Press the DPC-8.5’s [Video Circuit Off] button. The internal video circuitry is turned off, the [Video Circuit Off] button indicator lights up, and the V.OFF indicator appears on the display. 2 To turn the video circuitry back on, press the button again.
Configuring the DPC-8.5 This chapter explains the various settings on the onscreen setup menus. Settings are arranged into six groups: Picture, Audio, Language, Display, Operation, and Initial Setup. The following table lists all of the settings, with a brief description and page number where you can find full details. Menu Setting Description Picture TV Shape Selects a picture format to match the aspect ratio of your TV. 54 Interlaced Setting Picture adjustments for interlaced scanning.
Configuring the DPC-8.5—Continued Menu Operation Setting Description Page # Pause/Still Selects Auto or Frame for paused and still pictures. 63 Parental Lock Sets the Parental Lock function. 63 Title/Group Stop Determines if playback stops at the end of the current title or group. 64 PBC Turns PBC (Playback Control) for VCDs on and off. 64 Priority Contents Determines what’s played on DVD-Audio discs with DVD-Video content. 64 Auto power off Sets the Auto power off function.
Configuring the DPC-8.5—Continued 1 2 4 5 3 6 7 8 9 +10 0 Clear 6 A-B Random Remote controller Display Enter / Setup Menu Top Menu Enter Return Setup Setup Audio Angle Subtitle Stop Play FR FF Disc 1 Disc 2 Down Pause Up Disc 3 Step/Slow Using the Onscreen Setup Menus This section explains how to use the onscreen setup menus. 1 Turn on the DPC-8.5 and your TV. On your TV, select the video input to which the DPC-8.5 is connected. 2 Press the [Setup] button.
Configuring the DPC-8.5—Continued A-B 4 5 6 7 8 9 +10 0 Clear Random 1 Display Menu Top Menu Enter / Remote controller Enter Return Setup Setup Audio Angle Subtitle Stop Play Enter FR FF Disc 1 Disc 2 Pause Down Up Disc 3 Step/Slow Interlaced Setting With this setting you can adjust various picture parameters for interlaced scanning. There are three setup memories (1, 2, 3) for storing your favorite settings. You could, for example, use one for daytime viewing (e.g.
Configuring the DPC-8.5—Continued Progressive Setting Audio Menu With this setting you can adjust various picture parameters for progressive scanning. There are three setup memories (1, 2, 3) for storing your favorite settings. You could, for example, use one for daytime viewing (e.g., sun shining through window) and one for nighttime viewing (e.g., curtains drawn, lights down). Parameter Range Contrast –7...0...+7 Brightness –7...0...+7 Color Tint –7...0...+7 –7...0...+7 Sharpness 0...
Configuring the DPC-8.5—Continued ■ Digital Out With this setting you can turn the OPTICAL DIGITAL AUDIO OUTPUT on or off. Depending on how you connect the DPC-8.5 to your other components, this can be useful in certain situations. On (default) OPTICAL DIGITAL AUDIO OUTPUT is on. Off OPTICAL DIGITAL AUDIO OUTPUT is off. Notes: • This setting has no effect on the analog audio outputs. Digital Out/Digital2 (COAXIAL) With these settings you can determine how the DPC-8.
Configuring the DPC-8.5—Continued Analog Audio Out With this setting you can configure the FRONT, SURR 1/SURR 2, CENTER, and SUBWOOFER AUDIO OUTPUTs for use with a 2-channel amp or a multichannel amp. ■ 2 Channel Choose this option if you’re connecting just the FRONT AUDIO OUTPUTs to a stereo amp. Multichannel audio will be downmixed into 2 channels and output by the FRONT AUDIO OUTPUTs. ■ Stereo Lt/Rt (Downmix) To access this setting, select 2 Channel, and then press the [Enter] or Right [ ] button.
Configuring the DPC-8.5—Continued 3 Remote controller Enter 4 Remote controller Enter 5 Remote controller Enter Use the Up and Down [ ]/[ ] buttons to select Front Speaker, press the [Enter] button, use the Left and Right [ ]/[ ] buttons to select an option, and then press [Enter] again. When setting the Speaker Setting, for speakers with a cone diameter larger than 6-1/2 inches (16 cm), Cone diameter specify Large. For those with a smaller diameter, specify Small.
Configuring the DPC-8.5—Continued 3 Remote controller Setup When you’ve finished, press the [Setup] button to exit setup, or press the Left [ ] button repeatedly to go back to the main setup menu. Note: • The Speaker Distance settings have no effect on SACD (multichannel area and 2-channel area) and 196 kHz/176.4 kHz DVD-Audio. Setting Levels With the Test Tone 4 Remote controller Use the Up and Down [ ]/[ ] buttons to select Test Tone, and then press the [Enter] button.
Configuring the DPC-8.5—Continued 2 Remote controller Use the Left and Right [ ]/[ ] buttons to set the delay time. Dynamic Range Control (Dolby Digital Only) DVD-V Memory Enter Range 1 2 3 Default 0 ms 0–100 ms 50 ms 50 ms DVD-A With the Dynamic Range Control you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts even when listening at low volume levels—ideal for watching movies late at night when you don’t want to disturb anyone.
Configuring the DPC-8.5—Continued Language Menu On-Screen Language With this setting you can select a language for the onscreen setup menus and messages. English (default): English Français: French Español: Spanish Deutsch: German Italiano: Italian Japanese Disc Menu Language DVD-V With this setting you can specify your preferred language for DVD menus. When you play a disc with menus available in several languages, your preferred language will be selected automatically.
Configuring the DPC-8.5—Continued Display Menu On-Screen Display With this setting you can turn on or off onscreen messages, such as “Play,” “Stop,” and “Resume.” Off: Onscreen messages off. On (default): Onscreen messages on. Operation Menu Pause/Still DVD-V The Pause/Still setting determines how still pictures are displayed when playback is paused and when frame-byframe playback is used. Auto (default) A frame or field is displayed depending on the disc.
Configuring the DPC-8.5—Continued 3 Remote controller Enter 4 Remote controller Setup Use the Up and Down [ ]/[ ] buttons to specify the parental lock level from 1 through 8, and then press [Enter]. The parental lock is now set. The parental lock levels conform to U.S. movie ratings as follows: • Level 7: NC-17 • Level 6: R • Level 4: PG13 • Level 3: PG • Level 1: G When you’ve finished, press the [Setup] button. The settings are stored.
Configuring the DPC-8.5—Continued Language Initial Setup Menu This menu appears automatically the very first time you turn on the DPC-8.5. See “First Time Setup” on page 27 for more information. Selecting Other Languages This section explains how to select other languages for disc menus, audio, and subtitles. 1 Remote controller Enter 2 Remote controller Enter Select “Others” from the Disc Menu Language, Audio Language, or Subtitle Language menu, and then press [Enter]. The language code boxes appear.
Troubleshooting Symptom Can’t turn on the DPC-8.5? The DPC-8.5 turns itself off when it’s not being used? No picture? No sound? The picture distorts occasionally? Picture instability or noise? Remedy The power cord is not connected. Connect the power cord to a suitable wall outlet (page 26). External interference is affecting the DPC-8.5’s digital circuitry. Turn off the DPC-8.5, wait five seconds, then try turning it on again.
Troubleshooting—Continued Symptom Possible cause Remedy MP3 files without a “.mp3” or “.MP3” filename extension are not recognized. Use the correct filename extension (page 10). The MP3 disc is a multisession disc. Only files in the first session of a multisession disc can be played (page 10). JPEG files without a “.jpg” or “.jpeg” (uppercase or lowercase) filename extension are not recognized. Use the correct filename extension (page 10). Only baseline JPEG files are supported.
Specifications Signal System NTSC Composite Video Output/Impedance 1.0 V (p-p)/75 Ω negative sync, RCA/phono x2 S-Video Output/Impedance Y: 0.7 V (p-p)/75 Ω negative sync, 4-pin mini DIN x2 C: 0.286 V (p-p)/75 Ω Component Video Output/Impedance Y: 1.0 V(p-p)/75 Ω PB/PR: 0.7 V (p-p)/75 Ω RCA/phono & BNC DVD-Audio Frequency Response DVD Linear Sound Audio CD 4 Hz–50 kHz (192 kHz) 4 Hz–44 kHz (96 kHz) 4 Hz–22 kHz (48 kHz) 4 Hz–20 kHz (44.
