Owner's Manual

20
Connecting the DPS-5.9—Continued
Notes:
Before making any connections, turn off the DPS-5.9
and your TV and disconnect their power cords from
the wall outlets.
Also refer to the connection information supplied with
your TV.
Connect the DPS-5.9’s video outputs directly to your
TV. Don’t connect a VCR or other video equipment in
between your DPS-5.9 and TV. Doing so may result in
picture distortion, because of the copy protection sys-
tem used on DVD-Video discs.
When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant
digital noise, which may damage your equipment.
Analog Connection
Use an RCA audio cable to connect the DPS-5.9’s ANA-
LOG AUDIO OUTPUTs to a pair of analog audio inputs
on your AV receiver, as shown.
Digital Connection
To enjoy Dolby Digital or DTS surround sound, you
need to connect one of the DPS-5.9 digital audio outputs
to the digital input on a Dolby Digital or DTS decoder or
an AV receiver with built-in decoders.
Use an optical (or coaxial) digital audio cable to connect
the DPS-5.9’s COAXIAL (or OPTICAL) DIGITAL
AUDIO OUTPUT to an optical (or coaxial) input on
your AV receiver, as shown.
When the HDMI Output setting is set to On (see
pages 27, 46), the DPS-5.9 cannot output progres-
sive video. To output progressive video, you must
set the HDMI Output setting to Off (see pages 27,
46), and set the Progressive setting to Progressive
(see pages 27, 46).
When the Progressive setting is set to Progressive
so that progressive video is output by the COM-
PONENT VIDEO OUTPUT, and the PROGRES-
SIVE indicator is shown, nothing is output by the
VIDEO (composite video) and S VIDEO
(S-Video) outputs. To output video from these
outputs, you must set the Progressive setting to
Interlace (see pages 27, 46).
Connecting an AV receiver
L
R
ANALOG
INPUT
RCA cable
AV receiver
(white)
(red)
(white)
(red)
Signal flow
Connect one or
the other
Coaxial digital cable
(supplied)
Optical digital cable
Signal flow
Dolby Digital/DTS decoder
or AV receiver with built-in decoders.
OPTICAL
COA
XIAL
COAXIALOPTICAL