Owner's Manual

26
Initial Setup
This chapter explains the settings you need to make the
very first time the DPS-5.9 is turned on.
The very first time you turn on the DPS-5.9, the Initial
Setup menu appears onscreen.
Here you need to make a few settings to get the DPS-5.9
up and running. You can change these settings later (see
page 45).
Notes:
•You can cancel the Initial Setup by pressing the
[Setup] button and complete the settings later by using
the onscreen setup menus (see page 45).
• When the DPS-5.9 is connected via HDMI, and the
HDMI Control setting is set to On (default), the lan-
guage settings on a CEC-compatible TV may affect
the onscreen displays.
First Time Setup
1
Use the Up and Down [ ]/[ ]
buttons to select a TV shape, and
then press [Enter].
Select “4:3 Letter box” or “4:3 Pan
Scan” if you have a 4:3 TV. Select
“16:9 Widescreen” or “16:9 Com-
pressed” if you have a widescreen TV.
See page 45 for more information.
The “HDMI Output Setting” menu
appears next.
Enter
Enter
/
/
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
16:9 Widescreen
4:3 Pan Scan
16:9 Compressed
4:3 Letter box
✔
Remote controller
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
16:9 Widescreen
4:3 Pan Scan
16:9 Compressed
4:3 Letter box
✔
2
Use the Up and Down [ ]/[ ]
buttons to select “On” or “Off”
for the “HDMI Output Setting,”
and then press [Enter].
Select “On” to use the HDMI output.
The “On-Screen Language” menu
appears next.
3
Use the Up and Down [ ]/[ ]
buttons to select a language, and
then press [Enter].
See page 48 for more information on
the language options.
The Initial Setup menu closes and the
setup is complete.
The DPS-5.9 is now ready to use.
Remote controller
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
Off
On
: 16:9 Compressed
✔
Remote controller
Initial Setup
TV Shape
HDMI Output Setting
On-Screen Language
English
Français
Español
: 16:9 Compressed
: On
✔