Owner's Manual

27
HDMI and Progressive Settings
This section explains how to turn on the HDMI OUT and
change the video resolution when your TV or projector
is connected to the HDMI OUT.
See page 22 for HDMI connection information.
The DPS-5.9 supports the following resolutions:
Auto (default):
The resolution is automatically scaled to the preferred
resolution of the TV connected to the HDMI OUT.
If Auto is selected but the DPS-5.9 doesn’t support the
resolution preferred by the TV, the resolution will be
480p/576p.
480i (720
×
480i/576i)
The setting displayed depends on the country in which
you purchased the DPS-5.9 (720
×
480i 60Hz or 720
×
576i 50Hz).
480p (720
×
480p/576p)
The setting displayed depends on the country in which
you purchased the DPS-5.9 (720
×
480p 60Hz or 720
×
576p 50Hz).
720p 1280
×
720p 50/60Hz
1080i 1920
×
1080i 50/60Hz
1080p 1920
×
1080p 50/60Hz
Tip:
• These settings can also be changed by using the
HDMI Output and HD Resolution settings on the
onscreen setup menus (see pages 46).
Notes:
• Be sure to choose a resolution that’s supported by your
TV. If you select a resolution that your TV doesn’t
support, there will be no picture.
• When the HDMI OUT is on, interlaced video is output
by the composite video, S-Video, and component
video outputs.
If your TV’s component video input supports progres-
sive video, you can set the DPS-5.9 to progressive and
enjoy progressive video on your TV. If your TV’s com-
ponent video input doesn’t support progressive video,
set the DPS-5.9 to Interlace.
Setting the HDMI
1
Press the DPS-5.9’s [HDMI] but-
ton to turn on HDMI.
2
Press the [Resolution] button
repeatedly to change the HDMI
resolution.
The first button press displays the cur-
rent resolution onscreen. Press the but-
ton again while the resolution is
displayed to change the setting.
Resolution
HDMI
Resolution
Remote controller
Selecting Progressive or Interlace
1
Press the DPS-5.9’s [HDMI] but-
ton to turn off HDMI.
2
Use the [Resolution] button to
select progressive or interlace.
The first button press displays the cur-
rent setting onscreen. Press the button
again while the setting is displayed to
change the setting.
The PROGRESSIVE indicator appears
on the display when progressive is
selected. (If the HDMI OUT is on, the
indicator will not appear.)
Remote controller