SACD & DVD AUDIO/VIDEO PLAYER Table of Contents DPS-8.3 Getting Started Instruction Manual Connecting Setting Up the Player Basic Playback Advanced Playback Function Setup Thank you for purchasing the Integra SACD & DVD AUDIO/VIDEO PLAYER. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new SACD & DVD AUDIO/VIDEO PLAYER.
Table of Contents Various Functions Getting Started Getting Started Important Safeguards .................................... 3 Precautions .................................................... 4 Notes on Discs ............................................... 6 Features/Supplied Accessories ...................... 8 Before You Start ............................................. 9 Index to Parts and Controls ......................... 10 Advanced Playback Connecting Still Frame/Slow Play ....................
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING AVIS RISK OF ELECTRIC SHOCK DO NOT OPEN RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Precautions This unit contains a semiconductor laser system and is classified as a “CLASS 1 LASER PRODUCT”. So, to use this model properly, read this Instruction Manual carefully. In case of any trouble, please contact the store where you purchased the unit. To prevent being exposed to the laser beam, do not try to open the enclosure. DANGER: VISIBLE LASER AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. DO NOT STARE INTO BEAM. 1.
1. Regional Restriction Codes (Region Number) Regional restriction codes are built into DVD Players and DVDVideo media for each sales region. If the regional code of the DVD Player does not match one of the regional codes on the DVD-Video, playback is not possible. The regional number can be found on the rear panel of the DVD Player. (e.g. 2 for Region 2) 2. About This Manual This manual explains the basic procedures for operating the DVD Player.
Getting Started Notes on Discs This section shows you how to handle, clean, and store discs. The Structure of the Disc Content Playable Discs This DVD Player can playback the following discs. DVD-Video Normally, the contents of DVD-Video are divided into titles, and the titles are subdivided into chapters.
MP3 compatibility information • The CD-ROM must be ISO 9660 compatible. • Files should be MPEG1 Audio Layer 3 format, 44.1 or 48kHz, fixed bit-rate. Incompatible files will not play and “UNPLAYABLE MP3 FORMAT” will be displayed. • Not compatible with variable bit-rate (VBR) files. • This system only plays tracks that are named with the file extension “.mp3” or “.MP3”. • This system is not compatible with multi-session discs. If you try to play a multi-session disc, only the first session will be played.
Features/Supplied Accessories Features THX*1 Ultra Certified DTS*2/Dolby Digital*3/MPEG2/PCM Digital Audio Outputs Advanced 192-kHz/24-Bit D/A Converters Vector Linear Shaping Circuitry RCA 6ch Multi-channel outputs 108-MHz/12-bit Video D/A Conversion Progressive Component Video Outputs Plays DVD-Audio and Video Discs, DVD-Rs, DVD-RWs, MP3 CDs, CD-Rs, CD-RWs, Video CDs, SACDs and Audio CDs Pre-programmed and Learning Remote Control *1 Manufactured under licence from Lucasfilm Ltd.
Before You Start Inserting the Batteries 1 Open the battery compartment cover. Notes • Do not mix new batteries with old batteries or different kinds of batteries. • To avoid corrosion, remove the batteries if the remote controller is not to be used for a long time. • Remove dead batteries immediately to avoid damage from corrosion. If the remote controller does not operate smoothly, replace both batteries at the same time.
Index to Parts and Controls For operational instructions, see the page indicated in brackets [ ]. ■ Front panel 1 2 3 4 5 6 7 8 90 - = ~ ! SACD Standby/On Open /Close DVD Pause Stop Play Phones Phones Level CD Video Circuit Off Last Memory Top Menu Clear Cursor Menu Standby Power Dimmer On Repeat Setup Return Random Display Push to Enter Of f DPS-8.3 @ # $ % 1 Power switch and Standby indicator [20] Turns on the main power supply for the DPS-8.3. The DPS-8.
■ Display 1 2 3 4 5 6 7 8 DVD -AUDIO SACD V CD D TITLE GROUP GUI CHP TRACK TOTAL REMAIN 0 - 9 L C R LFE LAST L S S R S D.MIX COND PROGRESSIVE = ~ ! 1 Ÿ D indicator Lights when Dolby Digital sound is selected and played back. (Only with DVDs recorded in Dolby Digital). 2 Inserted disc indicator [25] 3 TITLE/GROUP indicator 4 GUI (Graphical User Interface) indicator Lights when an on-screen menu operation is being performed. Onscreen menu helps you set up the player.
Index to Parts and Controls ■ Rear panel 2 1 Y COMPONENT 1 PR PB 3 S VIDEO VIDEO Y 6 5 4 COMPONENT 2 PB PR RS-232 VIDEO OUTPUT AC INLET CH 1 CH 2 FRONT SURR 1 CENTER SURR 2 L ANALOG OUTPUT R IR IN L SURR 1 1+2 DIGITAL OUTPUT R SUB WOOFER 7 8 9 0 OPTICAL COAXIAL - = SACD & DVD AUDIO/VIDEO PLAYER MODEL NO. DPS-8.3 OUT REMOTE CONTROL ~ ! @ Shapes of jacks vary depending on the area in which it was purchased.
Remote controller (Operation buttons) 1 Send/Learn indicator [65] Lights when the remote controller is sending a command to the DVD Player or other preprogrammed component, and when learning the command of another remote control unit. 1 2 On/Standby buttons [20] Press On to turn the DVD Player on and Standby to put the DVD Player in standby. (The Standby indicator lights up.) RC-499DV 2 Standby On 3 T V.V C R Ligh / t 3 0 button [25] * Press to open and close the disc tray.
Index to Parts and Controls * Light button Press to switch on/off the remote controller button lights. ( Subttl button [39] Press repeatedly to select one of the subtitle languages recorded on a DVD-Video. ) Last M button [40] Press to resume playback from the point you last watched. _ Menu button [26] Press to display the DVD menu. Remote controller buttons that can be used to control your Integra/Onkyo receiver Press RCVR to set the remote controller to operate an Integra/Onkyo receiver.
Connecting Connecting to a TV Before connecting • Connect the plugs securely. • Refer also to the instruction manual of the TV. • When you connect the DVD Player to the TV, be sure to turn off the power and unplug both units from the mains before making any connections. • Connect the DVD Player to the TV directly. If you connect the DVD Player to a VCR, TV/VCR combination, or video selector, the playback picture may be distorted as DVD videos are copy protected.
Connecting to a TV Making component video connections Be sure to set the TV Aspect after connection using the Setup Navigator explained in “Setting Up the Player” starting on page 21 or the function setting menu explained in “Adjusting Audio and Video Settings” starting on page 46. If the TV or monitor has component video inputs, making this type of video connection will produce the ideal picture quality for the presentation of DVD-Video.
Connecting to an Amplifier (To Enjoy the Sound Advantage of the DVD Player) Although you can reproduce the DVD Player’s sound from the TV speakers with the connections on pages 15 and 16, connecting with an amplifier provides you high quality dynamic sounds. Notes Before connecting • The remote controller supplied with Integra/Onkyo amplifier can be used to operate the DVD player. • The function of the upper and lower z connectors are the same. Connect to either one.
Connecting to an Amplifier (To Enjoy the Sound Advantage of the DVD Player) Making discrete 5.1 channel ANALOG OUTPUT connections Notes The discrete ANALOG OUTPUT jacks are intended to deliver up to 5.1 channels of multi channel audio from DVD-Video and • To ensure proper delivery of sound, be sure to match the names of the jacks on the DVD Player and the component being DVD-Audio sources. Connections can be made from the connected to.
Operating Components not Reached by the Remote Controller Signals (IR IN/OUT) In order to use the remote controller to control the DPS-8.3 from a remote location, you will need to prepare a multi-room kit (sold separately such as one of those given below: • Integra’s Multi-Room System kit (IR Remote Controller Extension System). • Multiroom A/V distribution and control system such as those from Niles® and Xantech®. Make connection as shown below.
Connecting the Power/Turning on the DVD Player Before connecting • The DPS-8.3 is shipped with the main power (Power) switch in the on position (_ On). When the power cord is plugged in for the first time, the DPS-8.3 will automatically enter the standby state and the Standby indicator will light (same condition after step 2 below). • Make sure that all the connections on pages 15-18 are complete (the connection to a TV is required).
Setting Up the Player Setting Up the Player RC-499DV Standby On On T V .V C R Ligh / t Input Selector Mode DV The Setup Navigator has been designed to simplify the process of getting the DVD player ready to perform. Designed as a series of on-screen multiple-choice questions, the Setup Navigator automatically sets the audio, video, and language settings according to how the questions are answered. Once this procedure is complete, it will be possible to begin using the DVD player to enjoy DVDs.
Setting Up the Player Using the Setup Navigator ■ Setting the OSD Language (On-Screen Display Language) The [OSD Language] screen establishes the OSD language, or on-screen display language, which refers to the language that is used by the player in menus and on-screen messages. Additionally, the language that is established at this setting will also be used for the default audio and subtitle language.
■ Setting digital audio connections to an AV amplifier or decoder The [Digital Jack] screen establishes whether digital connections have been made to an AV amplifier, receiver, or external decoder. As there are numerous options available, please refer to the instructions supplied with the component the player is connected to determine what digital audio formats can be decoded. If you have made no digital connections, select [Not Connected].
Setting Up the Player Various sound formats and sound effects Minimum speaker configuration for DTS/Dolby Digital/MPEG2 surround sounds Subwoofer Left front speaker Center Speaker Right front speaker Right surround speaker Left surround speaker The 5.
Basic Playback RC-499DV Standby On Getting Started Using Your DVD Player 0 T V.V C R DV Au DVD VCD CD SACD Warning If the DVD Player is connected to the TV or amplifier through the analog audio jacks, do not play DTSencoded discs. Excessive noise may be output from the analog stereo jacks, which may damage the connected equipment. To reproduce DTS surround sounds, digital connection to an amplifier with a DTS decoder is needed.
Getting Started Using Your DVD Player DVD DVD VCD When a Menu Screen is Displayed Menu screens are displayed for DVDs that have menu screens or Video CDs that include Playback Control (PBC). DVDs often contain extra information that can be accessed in the DVD menu and sometimes makes navigating DVD menu screens as enjoyable as watching the feature presentation.
RC-499DV Standby On T V.
RC-499DV On/Standby 0 Getting Started Using Your DVD Player Standby On T V.V C R Ligh / t Input Selector Mode DV Au RCVR VCR Angle Subttl TV D La dio Top M enu CH M VOL Re A st Men u p Setu turn Display Audio SEL TV / VCR Video Off Dimmer M Muting DIM DIS £ 7 Step/Slow Step/Slow Pause Speed Surround DVD-V DVD VCD Resuming Playback from where you stopped Use the resume feature to restart playback from the point that the disc was stopped last time.
Advanced Playback RC-499DV Still Frame/Slow Play Standby On T V.V C R Ligh / t Input Selector Mode DV Au The video images on DVD and Video CD can be viewed as a still frame, played back at slow speeds and even advanced frame by frame.
Locating a Specific Title/Group/Folder/ Chapter/Track/Location DVD VCD CD SACD MP3 Searching for a Title, Group, Folder, Chapter, Track, or Location on a Disc This player offers different ways of accessing the information on a DVD, Video CD, CD, SACD or MP3. Using Search, you can search for titles or chapters on a DVD-Video, groups or tracks on a DVD-Audio, tracks on a Video CD, CD or folders or tracks on a MP3 and even select the point in time to start playback.
RC-499DV Standby On T V.V C R Ligh / t Input Selector Mode DV Au RCVR VCR Angle Subttl Top 2/3/5/∞ TV D La dio M enu st M Menu Men u CH VOL Re A p Setu turn Display ENTER Video Off M Dimmer Muting Audio SEL TV / VCR DIM DIS Step/Slow Step/Slow Pause Speed Surround Program Number buttons MP3 Repeat Random RPT RND PGM A-B Picture Cond M A-B PIC C.M Program 1 Load a CD-R/CD-RW containing MP3 tracks. 2 Press Menu to enter the MP3 Navigator screen.
RC-499DV Standby On T V .V C R Repeat Play Ligh / t Input Selector Mode DV Au RCVR VCR Angle Subttl Top You can repeat an entire title, group, folder, chapter or track, or just a part. TV D La dio M enu CH M VOL Re A st Men u p Setu turn Display Video Off M Dimmer Muting Audio SEL TV / VCR DIM DIS £ Step/Slow Step/Slow Pause Speed Surround Repeat A-B DVD VCD CD SACD DVD MP3 Repeating a Title, Group, Folder, Chapter or Track VCD MP3 PIC C.
Random Play RC-499DV Standby On T V .V C R Ligh / t Input Selector Mode DV Play titles, groups, chapters, or tracks on a disc in random order.
Playing in a Favorite Order You can combine your favorite titles, groups, folders, chapters or tracks and play them in any order. DVD Programming DVDs A program with a maximum of 24 steps can be memorized. 1 Press Program Press Program. PGM The Program screen appears.
RC-499DV Standby On T V.V C R Ligh / t Input Selector Mode DV Au RCVR VCR Angle Subttl Top 2/3/5/∞ TV D La dio M en u st M Men u CH VOL Re A p Setu turn Display Enter Video Off M Dimmer Muting Audio SEL TV / VCR DIM DIS £ Step/Slow Step/Slow Pause Speed Surround Repeat Program MP3 Number buttons Programming MP3s Random Program RPT RND PGM A-B Picture Cond M A-B PIC C.
Playing in a Favorite Order VCD DVD SACD CD Programming SACDs, Video CDs, CDs A program with a maximum of 24 steps can be memorized. 1 Program The program screen appears. When a SACD, Video CD or CD is loaded, the cursor appears in the program window. Track SACD MP3 Additional programming options After you have made a program, it is then possible to confirm, add, or clear the contents of the program. On a CD or Video CD track program, press Program to confirm.
RC-499DV Standby On T V.V C R Ligh / t Input Selector Mode DV Au RCVR VCR Angle Subttl Top 2/3/5/∞ TV D La dio M enu st M Men u CH VOL Re A p Setu turn Display Enter Video Off M Dimmer Muting Audio SEL TV / VCR DIM DIS £ Step/Slow Step/Slow Pause Speed Surround Program Number buttons Repeat Random RPT RND PGM A-B Picture Cond M A-B PIC C.M Program The current title/group/chapter/track number appears on-screen together with the program step number.
RC-499DV Selecting the Camera Angle T V .V C R Ligh / t Input Selector Mode Angle You can select a camera angle when viewing DVDs with the multi-angle option. Standby On DV Au RCVR VCR Angle Subttl TV D La dio Top M enu CH M VOL Re A st Men u p Setu turn Display Video Off M Dimmer Muting Audio SEL TV / VCR DIM DIS Step/Slow Step/Slow Pause Speed Surround Repeat DVD-V Viewing from a Desired Camera Angle (Multi-Angle) Press Angle during playback.
Selecting the Audio/ Subtitle Language RC-499DV Standby On T V .V C R Ligh / t Input Selector Mode DV Audio Au RCVR VCR Angle Subttl TV D La dio Top M enu CH M Subttl VOL Re A st Men u p Setu turn Display Video Off M Dimmer Muting Audio SEL TV / VCR DIM DIS Step/Slow Step/Slow Pause Speed Surround Repeat DVD-V Random Program RPT RND PGM A-B Picture Cond M A-B PIC C.M Clear CLR Function M Clear F.
Continuing Playback from a Specified Location (Last Memory) RC-499DV S t a n d by On T V.V C R Ligh / RCVR VCR Angle Subttl Standby TV D DV Au The Last Memory function is convenient when you want to continue viewing a disc from the point where you were watching before. Unlike the resume function, the Last Memory function is effective even if the DVD is removed from the player (Last Memory locations saved for Video CDs are effective only if the disc remains loaded in the player).
Memorizing Settings for Often Viewed DVDs (Condition Memory) RC-499DV T V .V C R Ligh / t Input Selector Mode DV Au You can store in memory settings for DVDs you often watch. Settings remain in memory even if you remove the disc from the player, or switch power to the player to standby. If you load a disc that has its settings memorized, “COND” appears in the display. When you start playing the disc, the memorized settings are automatically recalled.
Turning Off the Video Signal Output The DVD Player can be set playing audio exclusively. In this case, you can obtain sound of better quality, as the DVD Player does not process video signals. (All the video output jacks send no video signals.) RC-499DV Standby On T V .
Listening through Headphones You can connect stereo headphones to the DVD Player. SACD Standby/On Open /Close DVD Pause Stop Play Phones Phones Level CD Video Circuit Off Last Memory Top Menu Clear Cursor Menu Standby Power Dimmer On Repeat Setup Return Random Display Push to Enter Of f DPS-8.
Viewing Disc Information Use Display to get current information about the disc currently loaded. You can get information about the titles and chapters on a DVD-Video, groups and tracks on a DVD-Audio or tracks on a SACD, Video CD or CD or folders and tracks on a MP3. When viewing DVDs, you can also check the digital bitstream transmission rate. DVD VCD CD SACD MP3 Viewing Disc Information during while a disc is playing Display DIS Press Display during while a disc is playing.
RC-499DV Standby On T V.V C R Ligh / t Input Selector Mode DV ■ Using Dimmer function Au RCVR VCR Angle Subttl Top Press Dimmer to change the display brightness. TV D La dio M en u CH Each time Dimmer is pressed, the display brightness of the unit changes as shown below. Normal → Dim → Very Dim → Display Off → Normal While the display is off, if you perform a button operation, the display momentarily switches to Very Dim.
Function Setup Adjusting Audio and Video Settings The procedure on this page describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus. Using the Setup Screen Menus 1 Press On (Standby/On on the front panel). 6 Use the cursor buttons (3) to enter the setting options.
RC-499DV Standby On T V.V C R Ligh / t Input Selector Mode DV Au RCVR VCR Angle Subttl Top 2/3/5/∞ TV D La dio M enu CH M VOL Re A st Men u p Setu turn Display Audio SEL TV / VCR Video Off ENTER Setup M Dimmer Muting DIM DIS Step/Slow Step/Slow Pause Speed Surround ■ When setting up for the first time Repeat Random RPT RND PGM A-B Picture Cond M A-B PIC C.M Program Clear CLR Function M F.
Adjusting Audio and Video Settings Adjusting the Dynamic Range of the Audio Soundtrack Audio DRC stands for Audio Dynamic Range Compression. When [Audio DRC] is [On], soft sounds such as dialog can be heard more clearly without making loud sounds even louder. When [Audio DRC] is set to [Off], there is no effect on the audio source. Make changes to the [Audio DRC] setting in the Setup screen Audio menu.
■ DTS Out ■ MPEG Out This player is capable of outputting DTS digital audio for DVDs recorded in DTS. If this player is connected to an AV component that has a built-in DTS decoder, select [DTS]. If your system is not equipped to decode DTS, select [DTS 3 PCM]. Refer to the operating instructions supplied with your audio components if you are unsure about compatibility with DTS. This player is capable of outputting the MPEG digital bitstream.
Adjusting Audio and Video Settings Setting the Audio 1 Options ■ SACD Playback Expert SACD discs can be divided up into several different areas stereo audio, 5.1 channel audio, and, (for hybrid SACDs), standard CD audio. The SACD Playback setting enables you to select which area of the disc you want to play.
■ Gain Settings Expert You may want to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs. Under the default setting, all channels are output at the relative volumes they were recorded at. Change the setting to [Variable] if you want to adjust the relative volume levels of any of the speakers. Adjustment is in the range of –6dB to +6dB, in steps of 0.5dB. When set to [Variable], the overall output level may sound quieter than when set to [Fix].
Adjusting Audio and Video Settings Setting the TV Screen Size The width-to-height ratio of conventional TVs is 4:3, while the width-to-height ratio of wide screen and high-definition TVs is 16:9. This width-to-height ratio is called the aspect ratio. When viewing software recorded in different aspect ratios, the image’s height to width ratio can be switched to match the TV or monitor being used. Make changes to the TV screen size in the [TV Screen] setting in the Setup screen Video 1 menu.
Setting the Video 1 Options ■ Component Video ■ Turning the Screen Saver On and Off Compared to a standard interlaced TV picture, a progressive scan TV is capable of stable, flicker-free images. Set only if you connected the COMPONENT VIDEO OUT to a progressive-scan compatible TV or monitor. Make changes to the [Component Video] settings in the setup screen [Video 1] menu.
Adjusting Audio and Video Settings Adjusting the Video Quality You can either select a preprogrammed setting designed to match certain program types or make adjustments to match your own preferences and save them in the player’s memory. Make changes to the [Video Adjust] setting in the Setup screen Video 2 menu. ■ Adjusting the picture quality settings – To create your own setting (1) 1 Use the cursor button (3) to select [Start] then press ENTER.
• Chroma Level – Adjusts how saturated colors appear. • Chroma Delay – Compensates for misalignment of the Y (brightness) and the C (color) components. Adjusts the brightness of the darker images in the picture. Only effective with progress scan signals. 5 Use the cursor buttons (2/3) to adjust the settings. Adjust these while a disc is playing to see the effect of changes immediately. 6 Repeat steps 4 and 5 to make adjustments to other settings.
Adjusting Audio and Video Settings Setting the Video 2 Options ■ Changing the Background of the Screen You can select a background to appear when the player is in the stop mode. Make changes to the [Background] setting in the Setup screen Video 2 menu. Audio1 A2 V1 Video2 Language General Background — Gray Video Adjust Black Still Picture Auto On Screen Display On Angle Indicator On You can select to turn on the on screen display, or alternatively, choose to turn them off completely with the [Off] setting.
Setting the Language Options DVDs have the capacity to contain a great deal of audio information, which includes the ability to hold up to 8 different language tracks and subtitle information in as many as 32 different languages. This section outlines the variety of audio language and subtitle options available with this player.
Adjusting Audio and Video Settings Setting the Language Options ■ Selecting a subtitle language preference The subtitle language that you will normally display can be selected from the subtitles programmed on a disc. Even when the subtitle language is changed during playback by pressing Subttl, the language selected at this setting will be selected when the disc is changed. Make changes to the [Subtitle Language] setting in the Setup screen Language menu. You cannot make this setting with a disc playing.
■ Selecting subtitles, assist subtitles or no subtitles Expert Use this function to turn the subtitles on or off. Additionally, some DVDs provide assist subtitles that provide additional explanations of scenes in addition to the standard subtitles for viewers who are hard of hearing. Select [Assist Subtitle] to display these subtitles on DVDs where this function is offered. Make changes to the [Subtitle Display] setting in the Setup screen Language menu in the [Expert] menu mode (page 47).
Adjusting Audio and Video Settings Language Code List Language codes are used when setting the audio and subtitle language preferences (page 57– 59).
Setting the Parental Lock Level This player lets you set the Parental Lock if the DVD has a parental lock level recorded on it. With Parental Lock capable discs, you can block access to material you feel is inappropriate for your children. Refer to the DVD disc jacket and the accompanying documentation to see if a particular disc contains a parental lock level. Make changes to the [Parental Lock] setting in the Setup screen General menu.
Adjusting Audio and Video Settings Setting the Parental Lock Level ■ Setting the Parental Lock Level Change the Parental Lock level to a higher or lower level according to the settings printed on the DVD disc jacket or accompanying documentation. If you use the Condition Memory function to save the settings for a particular disc, the Parental Lock level is saved as well.
■ Group Playback Country Code List Country Input-code Country-code ARGENTINA AUSTRALIA AUSTRIA BELGIUM BRAZIL CANADA CHILE CHINA DENMARK FINLAND FRANCE GERMANY HONG KONG INDIA INDONESIA ITALY JAPAN KOREA, REPUBLIC OF 0118 0121 0120 0205 0218 0301 0312 0314 0411 0609 0618 0405 0811 0914 0904 0920 1016 1118 1325 1324 1412 1426 1415 1611 1608 1620 1821 1907 0519 1905 0308 2023 ar au at be br ca cl cn dk fi fr de hk in id it jp kr my mx nl nz no pk ph pt ru sg es se ch tw 2008 0702 2119 th gb us MALAYS
RC-499DV Adjusting Audio and Video Settings Standby On T V .V C R Ligh / t Input Selector Mode DV Au RCVR VCR Angle Subttl Top 2/3/5/∞ TV D La dio M enu CH M VOL Re A st Men u p Setu turn Display Audio SEL TV / VCR Video Off ENTER Setup M Dimmer Muting DIM DIS Step/Slow Step/Slow Pause Speed Surround Memorizing Settings (Function Memory) Up to 5 settings can be memorized. 1 Repeat Random RPT RND PGM A-B Picture Cond M A-B PIC C.
Programming the Commands of Other Remote Control Units into the Remote Controller Others This remote controller features a learning function that allows you to program the remote codes of other remote control units for more singular control of your home entertainment system. A number of commands can be programmed for operation for when the remote controller is in DVD mode and when it is in Receiver mode. Please follow the procedure in this section to program your remote controller to your preferences.
Programming the Commands of Other Remote Control Units into the Remote Controller Programming procedure 4 Press and hold down the button on the other remote control unit that corresponds to the command you want to program until the Send/ Learn indicator flashes twice to indicate that the command has been successfully programmed. After flashing twice, the Send/Learn indicator lights up again. 66 5 Repeat steps 3 and 4 to program other commands within the same mode.
Send/Learn RC-499DV Standby On T V.V C R Ligh / t Input Selector Mode DV Au RCVR VCR Angle Subttl La dio Top M en u M VOL Re A p Setu turn Display Video Off M Dimmer Muting Audio SEL TV / VCR You can only erase memorized commands and not preset ones.
Register the Codes of Other Unit's Remote Controllers Register the codes of other unit's (TV or VCR) remote controllers Use this feature to register the remote codes of other remote control units. Please look up your TV/VCR from list of remote control codes starting on page 69. 1 While pressing and holding down the desired Mode button (VCR or TV) on the remote controller press +10 and then release both buttons. When you press and hold down the desired Mode button, the Send/Learn indicator lights up.
Preset Settings ■ TV Brand AIWA AKAI AUDIO SONIC BELL&HOWELL BLAUPUNKT BRIONVEGA CENTURION COLTINA CORONAD CROWN DAEWOO DUAL EMERSON FENNER FERGUSON FISHER FUNAI FUJITSU GENERAL GE•PANA GE•RCA GOLD STAR GOODMANS GRUNDIG HITACHI HYPER INNO-HIT IRRADIO JVC KENDO KTV LUXOR MAGNAVOX MARANTZ MARK MATSUI MITSUBISHI MIVAR NEC NOKIA NOKIA OCEANIC NORDMENDE OKANO ORION PANASONIC PHILIPS PIONEER PROSCAN QUASAR RADIOSHARK RCA Remote Code 100, 101 102, 103, 104 105 106 107 108, 109 110 111, 112, 113 114 115, 116 117,
Register the Codes of Other Unit's Remote Controllers Preset Settings ■ VCR Brand AIWA AKAI BAIRD BELL&HOWELL BLAUPUNKT CGM COLTINA DAEWOO DIGTAL EMERSON FENER FISHER FUJITSU GENERAL FUNAI G.E.
Troubleshooting Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective instruction manuals of the connected components and TV. Symptoms The DVD Player doesn’t switch on. Causes The disc tray comes back out automatically, shortly after the disc tray is closed. • The disc is not placed properly on the disc • Use the disc tray guide to align the disc. tray. • The disc is dirty or warped. • Refer to “Notes on Discs”.
Troubleshooting Symptoms Frame search doesn't find the frame number input, or some frames are skipped when using frame advance. SACD audio cannot be output digitally. – Pages – • SACD audio cannot be output digitally. Select analog input for amplifier inputs for analog sound. – • The audio is connected to SURR 2. • Connect to SURR 1. 19 The surround sound level is low. • The selector switch is set to SURR 1+2. • Set the selector switch to SURR 1. 19 Cannot output 192kHz or 176.
DVD Player Symptoms The disc containing the MP3 tracks won't play. Some MP3 tracks appear to be missing from a disc. Causes • The disc containing the MP3 tracks is not formatted in ISO 9660. • The disc is not recorded in MP3 (MPEG-1 Audio Layer 3) format with a 32, 44.1 or 48kHz fixed bit rate. Remedies • Check that the track(s) are in the MPEG1 Audio Layer 3 format. • Check that the sampling rate of the track(s) are 44.1 or 48kHz. Pages – • The track name does not end in “.mp3” or “.MP3”.
Specifications General Power supply USA & Canadian models Australian model AC 120 V, 60 Hz AC 230 – 240 50, Hz Power consumption USA & Canadian models Australian model 43 W 39 W Power consumption in standby mode USA & Canadian models Australian model 9.3 W 9.9 W Weight 5.0 kg, 11.0 lbs.
Memo 75
Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8111 Fax: 072-833-5222 W0209-2 SN 29343366A DPS8.3.E.71-76.p65 76 02.9.