User Manual

23
En
7. Multi-zone Connection-2 (ZONE 2 PRE/
LINE OUT)
You can enjoy audio in the separate room by, for example,
playing a Blu-ray Disc player in the main room (where this
unit is located) and listening to internet radio in the separate
room (ZONE 2).
Connections with an AV component
Connect with HDMI IN 1 to 5 if you want to output an
external AV component to ZONE 2. If the AV component
doesn't have an HDMI jack, connect using a digital optical
cable, digital coaxial cable, or analog audio cable.
ZONE 2 PRE/LINE OUT
It is possible to play 2 ch sources in a separate room while
sources with a maximum of 11.1 ch are being played in the
main room. Connect the ZONE 2 PRE/LINE OUT jacks of
the unit and the LINE IN jacks of the pre-main amplifier or
the power amplifier in a separate room with an analog audio
cable.
> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual
Troubleshooting | Supplementary Information, etc.
MAIN ROOM
LINE
IN
ZONE 2 PRE/LINE OUT
ZONE2
a
a Analog Audio Cable
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" (P27) to enjoy this feature.
0 The audio from externally connected AV
components can only be output when the audio is
analog or 2ch PCM audio signals. If you have
connected to this unit with an HDMI cable or
digital optical/coaxial cable, may be necessary to
convert the audio output of the AV component to
PCM output.