User Manual

24
8. Multi-zone Connection-3 (ZONE 3 PRE/
LINE OUT)
Along with the main room and ZONE 2, you can also enjoy
audio in yet another room (ZONE 3).
Connections with an AV component
To output the audio of an external AV component to ZONE
3, connect using an analog audio cable. Output to ZONE 3
is not possible when you connect with an HDMI cable or
digital optical/coaxial cable.
ZONE 3 PRE/LINE OUT
It is possible to play 2 ch sources in a separate room while
sources with a maximum of 11.1 ch are being played in the
main room. Connect the ZONE 3 PRE/LINE OUT jacks of
the unit and the LINE IN jacks of the pre-main amplifier or
the power amplifier in a separate room with an analog audio
cable.
> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual
Troubleshooting | Supplementary Information, etc.
MAIN ROOM
LINE
IN
ZONE 3 PRE/LINE OUT
ZONE3
a
BD/DVD
a Analog Audio Cable
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" (P27) to enjoy this feature.