User Manual

7
En
Install
Installation procedure
This unit can be used in a number of ways, depending on
the layout of the speakers you are installing, and the
connections made to external devices. Read the following
to help make the installation process smoother.
Step1: Speaker Layout
Select the speaker layout that suits the types of speakers
you have and the conditions they will be used in from the
choices presented on pages P8 to P12, then install the
speakers by referring to the illustrations and explanations
on the relevant page. Speaker layouts include systems that
use surround back speakers, systems that use height
speakers, and systems that use Bi-Amping speakers. Also
refer to the combinations available in "Speaker
combinations" on P13.
Step2: Connecting Speakers via a Power
Amplifier
To connect this unit to the power amplifier and speaker
systems, refer to P14 to P15 if you are using a speaker
layout described on one of P8 to P11, and to P16 to use a
speaker layout using Bi-Amping speakers described on
P12. The connection process will be smoother if you refer
to the illustrations and explanations and prepare the
required cables before hand.
Step3: Connect the TV & AV Components
Refer to P17 to P25 to connect your external devices such
as your TV, Blu-ray Disc Player, and also supplied
accessories such as the antennas. Also, P22 to P24
introduces the Multi-zone Connection option that allows you
to play video or audio into rooms other than the main room.
The connection process will be smoother if you refer to the
illustrations and explanations, confirm the connection types
on the external devices, and prepare the required cables
before hand.
> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual
Troubleshooting | Supplementary Information, etc.
1
2 3