Instruction Manual AV Receiver DRX-2.
Table of contents Firmware Update Speaker Layout Troubleshooting Main Room Supplementary Information Z Zone 2 Speaker Connections Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off".
Before starting the procedure Firmware Update Update Information of the firmware Firmware Update Procedure Part Names Front Panel Display Rear Panel Remote Controller Inputting Characters Speaker Layout The listening room and the speaker layout 3.1 Channel System 5.1 Channel System 7.1 Channel System 3.1.2 Channel System 5.1.
BLUETOOTH® Playback Playing audio from BLUETOOTH wireless technology enabled devices with this unit Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices Listening To the Radio Listening To the AM/FM Radio Presetting a Radio Station Listening Mode Selecting a Listening mode Quick Menu Menu operations Spotify AirPlay® Basic Operations Playing Back on multiple devices (AirPlay2) DTS Play-Fi® Playing Back Amazon Alexa Registering this unit with an Amazon account Operating this unit
Playing Back Connecting a transmitter for playback Connections Setting Up Playing Back Setup Setup Menu Menu list 1. Input/Output Assign 2. Speaker 3. Audio Adjust 4. Source 5. Listening Mode Preset 6. Hardware 7. Multi Zone 8.
Before starting the procedure What's in the box Note • Connect speakers with an impedance of 4 Ω to 16 Ω. • The power cord must be connected only after all other connections are completed. • We will not accept any responsibility for damage arising from the connection with equipment manufactured by other companies. • Network services and content that can be used may no longer be available if new functions are added by updating firmware or the service providers terminate their services.
Firmware Update This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one. In such a case, new functions may be added from the start. For how to confirm the latest firmware contents and the firmware version of your product, see the following section.
represents an alphanumeric character.) Refer to the following descriptions and check. Error Code • -01, -10: Ethernet cable not found. Connect the Ethernet cable properly. • -02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20, -21: Internet connection error. Check the following: –– Whether the router is turned on –– Whether this unit and the router are connected via the network Unplug and plug the power cords of this unit and the router. This may solve the problem.
4. Connect the USB storage device to the USB port of this unit. • If an AC adapter is supplied with the USB storage device, connect the AC adapter, and use it with a household outlet. • If the USB storage device has been partitioned, each section will be treated as an independent device. 5. Press . The Setup menu is displayed on the TV screen. 6. Select "8. Miscellaneous" - "Firmware Update" - "Update via USB" with the cursors in order, then press Enter.
Part Names Front Panel 1. On/Standby button 2. Hybrid Standby indicator: Lights up when any of the following functions is working or enabled in standby state of this unit. When this indicator is lighting, the power consumption in standby state increases, however, the increase in power consumption is minimized by entering the Hybrid Standby mode where only the essential circuits operate.
Front Panel 15. Zone 2 button: Controls the multi-zone function. ( →p85) Off button: Switches the multi-zone function off. ( →p85) 16. Zone 2 Level / buttons: Adjust the volume of the multi-zone function. ( →p85) 17. Phones jack: Connect headphones with a standard plug (ø1/4″/6.3 mm). 18. Input selector buttons: Switches the input to be played. 19. Setup Mic jack: Connect the supplied speaker setup microphone.
Display 3. 4. 5. 6. 7. 1. Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode. 2. Lights in the following conditions. : Headphones are connected. Z2: ZONE 2 is on. : Connected by BLUETOOTH. : Connected by Wi-Fi. NET: Lights when connected to the network with the "NET" input selector. It will blink if incorrectly B: Audio is output only to ZONE B. AB: Audio is output to both ZONE A and ZONE B.
Rear Panel 5. HDMI IN jacks: Transmit video signals and audio signals with an HDMI cable connected to an AV component. 6. ETHERNET port: Connect to the network with an Ethernet cable. 7. USB port: Connect a USB storage device to play music files ( →p88). You can also supply power (5 V/1 A) to USB devices with a USB cable. 8. AC INLET: Connect the supplied power cord. 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2.
Rear Panel PRE OUT FRONT jacks: Connect to a power amplifier. ( →p46) 14. SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack. 15. 12V TRIGGER OUT A/B/C jack: Connect a device equipped with a 12V trigger input jack to enable power link operation between the device and this unit. ( →p57) 16. SPEAKERS terminals: Connect speakers with speaker cables.
Remote Controller 1. On/Standby button 2. Input selector buttons: Switches the input to be played. 3. Play buttons: Used for playback operations for the Music Server ( →p91) or USB device ( →p88). Also, switching to "CEC MODE" with "19. Mode button" allows you to operate an HDMI CEC function-enabled AV component. (Some devices may not be operated.) 4. Q (Quick Menu) button: Pressing this button during playback allows you to make settings such as "HDMI" and "Audio" quickly on the TV screen while playing.
Remote Controller 12. Tone buttons: Adjusts the sound quality. Press "Treble", "Bass", or "Vocal" to select what you want to adjust, then adjust with + and -. Treble/Bass button: You can adjust the sound quality of the front speakers. 1.Press Treble or Bass to select the content to adjust. Treble: Enhances or moderates the high-tone range of the front speakers. Bass: Enhances or moderates the low-tone range of the front speakers. 2. Press + or - to adjust. 19.
Inputting Characters You can input characters or symbols on the keyboard displayed on the TV screen such as when inputting a password for Wi-Fi Setup ( →p116) or naming a preset radio station ( →p111). 1. Select a character or symbol with the cursors / / / on the remote controller and press the Enter button. 2. When saving characters after input, select "OK" and press the Enter button. , / / / Enter . / ; : • Select "A/a" to switch between upper and lower cases.
Speaker Layout This unit can be used in different ways, depending on the layout of the speakers you are installing. Select the speaker layout that suits the installation environment, then confirm the methods for installation and connection. Speaker Layout 3.1ch 5.1ch Speaker Layout ( →p20) Speaker Installation ( →p25) Speaker Connections ( →p30) Speaker Combinations ( →p158) 7.1ch 3.1.2ch 5.1.
The listening room and the speaker layout Speaker Layout 1. ZONE A Speakers The speaker system set up in the main room (where this unit is located). 2. ZONE 2 Speakers The 2 ch speaker system set up in a separate room (ZONE 2). This enables you to play the same source in the main room and the separate at the same time, or to play separate sources. ZONE A (Main room) ZONE 2 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
3.1 Channel System Basic system ( →p26) Speaker Layout A 3.1 Channel System that combines front speakers with a center speaker and a subwoofer. 3.1 ch + ZONE 2 ( →p26) 3.1 ch (Bi-Amping (Front)) ( →p26) Main Room Zone 2 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
5.1 Channel System Basic system ( →p26) Speaker Layout This is a basic 5.1 Channel System. 5.1 ch + ZONE 2 ( →p26) 5.1 ch (Bi-Amping (Front)) ( →p26) Main Room Zone 2 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
7.1 Channel System Basic system ( →p27) Speaker Layout This is a 7.1 Channel System that consists of the basic 5.1 Channel System and added surround back speakers. 7.1 ch + ZONE 2 ( →p27) Main Room Zone 2 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
3.1.2 Channel System Speaker Layout A Speaker System that is a 3.1 Channel System with one set of height speakers added. 3.1.2 ch (Front High or Rear High) ( →p28) 3.1.2 ch (Top Front or Top Middle or Top Rear) ( →p28) 3.1.2 ch + ZONE 2 ( →p28) 3.1.2 ch (Bi-Amping (Front)) ( →p28) 3.1.2 ch (Dolby Enabled Speakers (Front)) ( →p28) Main Room 3.1ch 5.1ch 7.1ch 3.1.2ch Zone 2 5.1.
5.1.2 Channel System 5.1.2 ch (Front High or Rear High) ( →p29) Speaker Layout A Speaker System that is a 5.1 Channel System with one set of height speakers added. 5.1.2 ch (Top Front or Top Middle or Top Rear) ( →p29) 5.1.2 ch (Dolby Enabled Speakers (Front or Surround)) ( →p29) 5.1.2 ch + ZONE 2 ( →p29) Main Room 3.1ch 5.1ch 7.1ch 3.1.2ch Zone 2 5.1.
Speaker Installation How the speakers are set up depends on the size and shape of the room, so here we introduce just a basic layout example.
Speaker Installation 3.1 Channel System FL 5.1 Channel System SW C FR FL SW a C FR a b SL a: 22° to 30° FL, FR C SW Place the Left and Right Front Speakers to match ear height. The center speaker should be set up facing the listening position at an angle. Place the powered subwoofer between the center speaker and a front speaker. SR a: 22° to 30°, b: 120° FL, FR C SW SL, SR Place the Left and Right Front Speakers to match ear height.
Speaker Installation 7.1 Channel System FL SW C FR a b SL SR c SBL SBR a: 22° to 30°, b: 90° to 110°, c: 135° to 150° FL, FR C Place the Left and Right Front Speakers to match ear height. The center speaker should be set up facing the listening position at an angle. SW Place the powered subwoofer between the center speaker and a front speaker. Place the Left and Right Surround Speakers to be just above ear SL, SR height. SBL, SBR Place the Left and Right Surround Back Speakers at ear height.
Speaker Installation 3.1.2 Channel System Top Speakers TFL High Speakers FHL a: 22° to 30° FHR TML TFR TRL TMR 3´ (0.9 m) or more TRR a: 30° to 55° b: 65° to 100° c: 125° to 150° c b a a RHL RHR 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the front speakers, angled to face the listening position. RHL, RHR Place the rear high speakers so the lateral distance matches the front speakers, angled to face the listening position.
Speaker Installation 5.1.2 Channel System Top Speakers TFL High Speakers FHL FHR a: 22° to 30° b: 120° TML TFR TRL TMR 3´ (0.9 m) or more TRR a: 30° to 55° b: 65° to 100° c: 125° to 150° c b a a b RHL RHR 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the front speakers, angled to face the listening position. RHL, RHR Place the rear high speakers so the lateral distance matches the front speakers, angled to face the listening position.
Speaker Connections (Before starting the procedure) Speaker Connections and "Speaker Impedance" Settings 31 4-16Ω Speaker Connections 3.1 Channel System 5.1 Channel System 7.1 Channel System 3.1.2 Channel System 5.1.2 Channel System 33, 34, 35 36, 37, 38 39, 40 41, 42, 43 44, 45 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections and "Speaker Impedance" Settings Speaker Connections Connections (Note) Speaker Impedance Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance" to "4ohms" for "Speaker Setup" in the Initial Setup section ( →p129). When setting "Speaker Impedance" from the Setup menu, press on the remote controller, and set "2.
Speaker Connections Connect the Subwoofer a a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack. 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 3.1 Channel System FL SW C FR 3.1ch SW FR FL C 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 3.1 Channel System + ZONE SPEAKER MAIN ROOM FL SW C FR ZONE 2 FL(Z2) FR(Z2) 3.1ch SW FR FL C FR(Z2) FL(Z2) 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 3.1 Channel System (Bi-Amping the Speakers) FL SW C FR For highfrequency SW For lowFR frequency FL C Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 5.1 Channel System FL SL SW C FR SR SW FR FL C SR SL 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 5.1 Channel System + ZONE SPEAKER MAIN ROOM FL SW SL C FR SR ZONE 2 FL(Z2) FR(Z2) 3.1ch SW FR FL C SR SL FR(Z2) FL(Z2) 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 5.1 Channel System (Bi-Amping the Speakers) FL SL SW C FR SR For highfrequency SW For lowFR frequency 3.1ch FL C SR SL Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 7.1 Channel System FL SW C FR SL SR SBL SBR 3.1ch SW FR FL C SR SL SBR SBL 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 7.1 Channel System + ZONE SPEAKER MAIN ROOM FL SW C FR SL SR SBL SBR ZONE 2 FL(Z2) FR(Z2) 3.1ch SW FR FL C SR SL SBR SBL FR(Z2) While ZONE 2 playback is being performed, surround back speakers installed in the main room cannot play audio. FL(Z2) 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 3.1.2 Channel System HL FL HR SW C FR SW FR FL C OR OR OR OR HR HL 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 3.1.2 Channel System + ZONE SPEAKER MAIN ROOM HL FL HR SW C FR ZONE 2 FL(Z2) FR(Z2) SW FR FL C OR OR OR OR HR HL 3.1ch FR(Z2) FL(Z2) 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 3.1.2 Channel System (Bi-Amping the Speakers) HL FL HR SW C FR For highfrequency SW For lowFR frequency FL C OR OR OR OR HR HL Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 5.1.2 Channel System HL FL SL HR SW C FR SR SW FR FL C SR SL OR OR OR OR HR HL 3.1ch 5.1ch 7.1ch 3.1.2ch 5.1.
Speaker Connections 5.1.2 Channel System + ZONE SPEAKER MAIN ROOM HL FL HR SW SL C FR SR ZONE 2 FL(Z2) FR(Z2) SW FR FL C SR SL OR OR OR OR HR HL While ZONE 2 playback is being performed, height speakers installed in the main room cannot play audio. 3.1ch FR(Z2) FL(Z2) 5.1ch 7.1ch 3.1.2ch 5.1.
Connecting a Power Amplifier Power amplifier a Speaker Connections You can connect a power amplifier to the unit and use the unit as a pre-amplifier in order to produce a large volume that cannot be output with the unit only. Connect the front speakers to the power amplifier. For details, refer to the power amplifier's instruction manual. • Use the PRE OUT FRONT jacks for connection as show on the left. Setup • Set "2.
Connections Connections Connecting the TV Connecting the SUB Monitor Connecting Playback Devices Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting Antennas Network Connection Connecting the Power Cord 48 49 50 52 54 55 58 47
Connections Connecting the TV By connecting a TV to this unit, you can show the video from AV devices connected to this unit on the TV and also play the sound from the TV through this unit. To ARC/eARC TV IN(ARC) SUB Monitor ( →p49) ZONE 2 ( →p52) ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection.
Connections Connecting the SUB Monitor SUB Monitor This unit has multiple HDMI OUT jacks, and another TV or projector can be connected to the HDMI OUT SUB jack. • Switch between MAIN and SUB using the HDMI Main/Sub button on the remote controller ( →p15) or "Quick Menu" ( →p70). Note that this jack is not ARC-compatible. • If devices with different resolutions are connected to HDMI OUT MAIN jack and SUB jack, images are output with the lower resolution. a Be sure to insert the HDMI cable all the way in.
Connections Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted BD/DVD GAME Cable/Satellite set-top box a This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.
Connections Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using an analog audio cable. You can also connect a turntable that has an MMtype cartridge to the PHONO jack. • If the turntable has a built-in phono equalizer, connect it to any of the AUDIO IN jacks other than the PHONO jack.
Connections Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2). Note that only the devices connected to the HDMI IN1 to IN3 jacks can be played on the TV in the separate room.
Connecting an Integrated Amplifier (ZONE 2) Connections You can enjoy 2 ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). Use an analog audio cable to connect the ZONE 2 PRE/LINE OUT terminal on this unit to the input jack on an integrated amplifier in the separate room. • To output audio from an externally connected AV component to ZONE 2, connect it to any of HDMI IN1 to IN3 jacks.
Connections Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape.
Connections Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the ETHERNET jack with the Ethernet cable as shown in the illustration. To connect by Wi-Fi, select your desired setting method in "Network Connection" ( →p130) of Initial Setup, and then follow the on-screen instructions.
Connections Connecting External Control Devices IR IN/OUT port When connecting a remote control receiver unit consisting of an IR Receiver, etc. to this unit, operation using the remote controller is possible even if the remote control signal is difficult to reach (due to installation in the cabinet, etc.). It is also possible to operate this unit from other room such as ZONE 2 with a remote controller, or operate other devices with the remote controller by connecting other devices to this unit.
Connections 12V TRIGGER OUT jack When connecting a device equipped with a TRIGGER IN jack such as a BD/DVD player to this unit, the device can be turned on or set to standby by interlocking the operation on this unit. When the desired input is selected on the unit, power link operation will be activated with a control signal of maximum 12 V/100 mA from the 12V TRIGGER OUT A jack or maximum 12 V/25 mA when using the 12V TRIGGER OUT B or C jack.
Connections Connecting the Power Cord Connect the power cord after all the connections are completed. • This model includes a removable power cord. Be sure to connect the power cord to the AC INLET of the unit first, and then connect it to the outlet. Always disconnect the outlet side first when disconnecting the power cord.
Playback AV Component Playback BLUETOOTH® Playback Listening To the Radio Listening Mode Quick Menu Playback Basic Operations 60 61 64 68 70 Network Services Spotify 72 AirPlay® 73 ® DTS Play-Fi 75 Amazon Alexa 76 78 Amazon Music Connecting the Sonos System for Playback 80 Internet Radio 82 Convenience functions 84 Multi-zone Playing different audio and video 87 USB Storage Device 88 91 Music Server Play Queue 94 Connecting a transmitter for playback 96 59
Playback AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI Main/Sub button or "Quick Menu" ( →p70) to switch between MAIN and SUB. Basic Operations TV’s REMOTE INPUT Inputs TV HDMI 1 HDMI 2 HDMI 3 TV Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2.
Playback BLUETOOTH® Playback You can wirelessly play music on a smartphone or other BLUETOOTH wireless technology enabled device through the speakers connected to this unit. It is also possible to transmit the audio from this unit to BLUETOOTH enabled headphones, wireless speakers, etc. Playing audio from BLUETOOTH wireless technology enabled devices with this unit Perform the following procedure when this unit is on. Pairing 1. When you press the Bluetooth button, "Now Pairing...
Playback Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices Pairing The illustration shows an image. 1. Press the input selector you want to play. • Select a source other than "BLUETOOTH". This function does not work if you select "BLUETOOTH". • This function can be used in one location, either the main room (where this unit is located) or a separate room (ZONE 2). When using in the main room, set the input selector for the separate room to anything other than "BLUETOOTH".
Playback Playing Back 1. Do the play operations on the AV component connected to this unit. Do the play operations on this unit when the input is TUNER or NET. You cannot adjust the volume of the BLUETOOTH wireless technology enabled device on this unit. Adjust on the connected BLUETOOTH wireless technology enabled device. • You cannot transmit audio to multiple BLUETOOTH wireless technology enabled devices from this unit. • Audio is also output from the speakers connected to this unit.
Playback Listening To the Radio You can receive AM/FM radio stations on this unit with the built-in tuner. Listening To the AM/FM Radio Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1. Press Tuner repeatedly to select either "AM" or "FM". 2. Press Mode repeatedly to display "TunMode: Auto" on the display. 3. When you press the cursors / , automatic tuning starts, and searching stops when a station is found.
Playback Tuning Manually Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. 1. Press Tuner repeatedly to select either "AM" or "FM". 2. Press Mode repeatedly to display "TunMode: Manual" on the display. 3. While pressing the cursors / , select the desired radio station. • Each time you press the cursors / , the frequency changes by 1 step.
Playback • Unusual characters may be displayed when the unit receives unsupported characters. This is not a malfunction. Also, if the signal from a station is weak, information may not be displayed.
Playback Presetting a Radio Station Registration Procedure Selecting a Preset Radio Station You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure. 1. Press Memory so that the preset number on the display blinks. 2. While the preset number is blinking (approx. 8 seconds), repeatedly press the cursors / to select a number between 1 and 40. 3. Press Memory again to register the station.
Playback Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by pressing Movie/TV, Music, and Game. ( →p148) • For details of the effects of each listening mode, refer to "Listening Mode Effects" ( →p154). • For listening modes selectable for each audio format of input signals, refer to "Input Formats and Selectable Listening Modes" ( →p150). Selecting a Listening mode 1.
Playback Checking the input format and listening mode By repeatedly pressing on the remote controller or Info on the main unit, the main unit display changes in the following order: • The display content for the BLUETOOH input is different. • Not all the information is necessarily displayed. Input source and volume Listening mode Input format The display is switched in a few seconds.
Playback Quick Menu Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu. Quick Menu BD/DVD HDMI HDMI Out Audio A/V Sync Room EQ Audio Return Channel Level Select the item with the cursors / of the remote controller, and press the Enter button to confirm your selection. Use the cursors to change the settings.
Playback HDMI Room EQ HDMI Out: Select the HDMI OUT jack to output video signals from "MAIN", "SUB", and "MAIN+SUB". It cannot be set if the listening mode is Direct. A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. The setting can be set for each input. • It cannot be set if the listening mode is Direct. Audio Return Channel: You can enjoy the sound of the HDMI-connected ARCcompatible TV through the speakers connected to the unit.
Playback Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
Playback AirPlay® By connecting this unit to the same network as that of iOS devices such as iPhone ®, iPod touch® and iPad®, you can enjoy music files on iOS devices wirelessly. • Update the OS version on your iOS device to the latest version. • Depending on the iOS version, operation screens or operation procedures on the iOS device may be different. For details, refer to the operating instructions for the iOS device. Basic Operations 1.
Playing Back on multiple devices (AirPlay2) Playback This unit supports AirPlay2. If the version of the iOS device is iOS11.4 or later, you can play the tracks on the iOS device simultaneously on this device and on another device that supports AirPlay2. 1. Connect the iOS device to the access point where this unit is connected via network. 2.
Playback DTS Play-Fi® https://play-fi.com/ When connecting this unit to the same network as mobile devices, such as a smartphone and tablet, you can enjoy music played on the mobile device wirelessly. Music from a streaming distribution service or music in the music library on a mobile device can be played. This function also supports a playlist on iTunes.
Playback Amazon Alexa Alexa is a cloud-based voice service developed by Amazon. When this unit is registered with an Amazon account, you can use a terminal with Amazon Alexa (an Amazon Echo, etc.) or Amazon Alexa App (available on iOS and Android™) to perform operations such as adjusting the volume of this unit or playing music using voice commands. • You need an Amazon account to use Amazon Alexa. For more information, see the Amazon website. Registering this unit with an Amazon account 1.
7. When registration is finished, the screen returns to the one for Integra Control Pro. Follow the on screen instructions and talk to the terminal with Amazon Alexa (an Amazon Echo, etc.), and confirm that you can use voice commands. For example: "Alexa, raise the volume of the speaker (*2)" "Alexa, play music from the speaker (*2)" (*2) Use the device name you registered in Step 4 when talking.
Playback Amazon Music Registering This Unit with Amazon Music Registering this unit with Amazon Music allows you to enjoy the music distribution service provided by Amazon. • To play Amazon Music, you need to have your Amazon account and sign up for Amazon Prime or Amazon Music Unlimited. For more information, see the Amazon website. Amazon Music is now available in several countries. If Amazon Music is not available in your country, please visit https://music.amazon.com/ for more info. 1.
Playing Amazon Music using the Integra Control Pro Playback 1. Start up Integra Control Pro. This unit is automatically displayed after startup. Then, tap and select this unit displayed. 2. Tap "NET" or "NETWORK" on the upper part of the screen to switch to the network screen. Then tap the "Amazon Music" icon. 3. Select the content to play from the menu screen of Amazon Music to start playback. Playing Amazon Music using the remote controller 1. 2. 3. 4.
Playback Connecting the Sonos System for Playback How to Connect This Unit and Sonos Connect Connecting this unit and Sonos Connect allows you to send the music or music sources on the Sonos App to this unit. Through Sonos Connect, you can play this unit with the same group of another Sonos device on the network or can play only on this unit. Also, if you start to play music from Sonos App, this unit is automatically turned on and the link function to switch input works. • When "6.
Playback cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again. Output Zone: With the cursors / , select the ZONE where you want to listen to the music. "Main": Outputs audio only to the main room (where this unit is located). "Zone 2": Outputs audio only to the separate room (ZONE 2). "Main/Zone 2": Outputs audio to both the main room and separate room.
Playback Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services such as TuneIn Radio. • To play Internet radio services, the network needs to be connected to the Internet. • Depending on the Internet radio service, a user registration may be required on your PC beforehand. For details of each service, visit the website of each service.
Playback Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing Enter will display the menu on the screen. When multiple icons are displayed, select the icon with the cursor, and press Enter.
Playback Multi-zone You can enjoy 2 ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). The same source can be played back in the main room and ZONE 2 simultaneously. Also, different sources can be played back in both rooms. For the "NET" or "BLUETOOTH" input selector, you can select only the same source for the main room and separate room.
Playing Back 2 Playback In remote controller operation, while pressing and holding the Zone 2 Shift button, press other buttons for operation. 1. While pressing and holding the Zone 2 Shift button on the remote controller, point the remote controller at this unit and press . • "Z2" on the display of the main unit lights up. 2. While pressing and holding the Zone 2 Shift button on the remote controller, press the input selector of the input source you want to play in the separate room.
Playback • When video and audio via HDMI input are output to ZONE 2, set "1. Input/Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( →p101) to "Use" on the Setup menu. • DSD audio signals cannot be output to ZONE 2 with the "NET" input selector. • If ZONE 2 is on, power consumption during standby will increase. To disable the function: While pressing and holding the Zone 2 Shift button on the remote controller, press . Alternatively press Off on the main unit.
Playback Playing different audio and video Displaying Your Favorite Video on TV While Playing Music While listening to the music from a CD or BLUETOOTH enabled device, you can display video on TV from an AV component such as a Blu-ray Disc player. • For audio playback, you can select an input selector to which video input is not assigned, such as "CD", "PHONO", "TUNER", "NET" and "BLUETOOTH". • When "OSD Language" ( →p101) is set to Chinese, the audio from "NET" and "BLUETOOTH" cannot be played.
Playback USB Storage Device You can play music files stored on a USB storage device. Supported Audio Formats MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer 3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR WMA (.wma) • 44.1 kHz, 48 kHz/Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz/8 bit, 16 bit, 24 bit AIFF (.aiff/.
Playback Playing music files saved on a USB storage device Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Plug your USB storage device containing music files into the USB port of this unit’s rear panel. 3. Press NET to display the network service list screen. 4. Select "USB" with the cursors, and then press Enter. • If the "USB" indicator blinks on the display, check whether the USB storage device is plugged in properly.
Playback • This unit supports the gapless playback of the USB storage device in the following conditions. When continuously playing WAV, FLAC and Apple Lossless files with the same format, sampling frequency, the number of channels and quantization bit rate. • To display an album title, artist name and album art of a file in WAV format, make the folder structure and file names as shown below when saving music files. The album art can be displayed by saving a .
Playback Music Server Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers this unit is compatible with are those PCs with players installed that have the server functionality of Windows Media ® Player 12, or NAS that are compatible with home network functionality. When using Windows Media ® Player 12, you need to make the settings beforehand.
Playback Playing Back TV’s REMOTE INPUT Inputs TV HDMI 1 HDMI 2 HDMI 3 Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Start the server (Windows Media® Player 12 or NAS device) containing the music files to play. 3. Make sure that the PC or NAS is properly connected to the same network as this unit. 4. Press NET to display the network service list screen.
Playback 6. Select the target server with the cursors, and press Enter to display the items list screen. • This unit cannot access pictures and videos stored on servers. • Depending on the server sharing settings, contents stored on the server may not be displayed. 7. With the cursors, select the music file to play, and then press Enter to start playback. • If "No Item." is displayed on the screen, check whether the network is properly connected. • To return to the previous screen, press .
Playback Play Queue 2. Tapping the "+" icon of the track you want to add will open the pop-up to add the Play Queue information. When downloading Integra Control Pro (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can save your favorite playlist (Play Queue information) among music files stored in the USB storage device connected to this unit and music files stored in PC or NAS connected to the same network as this unit, and you can play the music on the playlist.
Playback 2. Tap the " " icon of the track to sort, and drag the icon to the destination. 3. To delete a track, slide the track to the left until the trash icon changes to " ". If " icon to the left. Releasing your finger will the device is on iOS, slide the " delete the track from Play Queue. Playing Back Playback starts when you select "Play Now " for Play Queue addition, or select the track in the Play Queue service screen.
Playback Connecting a transmitter for playback When you connect wireless headphones or a wireless speaker transmitter to the ZONE B LINE OUT terminal of this unit, you can play back the same source through the wireless headphones or wireless speakers as in the main room. Connections Setting Up 1. Use an analog audio cable to connect the ZONE B LINE OUT terminal on this unit to the input terminal on the transmitter. 1. Press on the remote controller, and set "2.
Setup Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 1. TV Out / OSD 2. Speaker 2. HDMI Input 3. Audio Adjust 3. Digital Audio Input 4. Source 4. Analog Audio Input 5. Listening Mode Preset 6. Hardware 7. Multi Zone 8. Miscellaneous Setup Select the item with the cursors / of the remote controller, and press the Enter button to confirm your selection.
Setup Setup Menu Menu list 1. Input/Output Assign 1. TV Out / OSD 2. HDMI Input 3. Digital Audio Input 4. Analog Audio Input Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. You can change input assignment between the input selectors and HDMI IN jacks. Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks. Change input assignment between the input selectors and AUDIO IN jacks. p100 p102 p103 p103 2. Speaker 1. Configuration 2.
Setup 5. Listening Mode Preset 1. BD/DVD 2. GAME 3. CBL/SAT 4. STRM BOX 5. PC 6. AUX 7. CD 8. TV 9. PHONO 10. TUNER 11. NET 12. BLUETOOTH Preset the favorite listening mode when "BD/DVD" input is selected. Preset the favorite listening mode when "GAME" input is selected. Preset the favorite listening mode when "CBL/SAT" input is selected. Preset the favorite listening mode when "STRM BOX" input is selected. Preset the favorite listening mode when "PC" input is selected.
Setup 1. Input/Output Assign 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. HDMI Out (Default Value: MAIN) Select the HDMI jack to be connected with the TV. • If devices with different resolutions are connected to HDMI OUT MAIN jack and SUB jack, images are output with the lower resolution.
Setup 1. Input/Output Assign HDMI 4K/8K Signal Format (Default Value: 4K Standard) Set the 4K/8K signal format input and output by this unit. Set to suit the TV or player connected. • The corresponding resolution is different depending on the HDMI jack connected. See "Corresponding input resolutions" ( →p162) for details. 4K Standard 4K Enhanced 8K Standard When using a High Speed HDMI Cable that supports 10.2 Gbps to connect a TV or player compatible with standard 4K signal formats (4K 30Hz, etc.
Setup 1. Input/Output Assign Mini Player OSD (Default Value: Always On) You can display on the TV the images from another input selected last while playing the audio from NET or BLUETOOTH input. After switching the input to NET or BLUETOOTH, play the images and audio. And then when you press Mode on the remote controller, the image is displayed in full-screen mode, and the audio information (Mini Player) for NET or BLUETOOTH is displayed in the corner of the screen.
Setup 1. Input/Output Assign 3. Digital Audio Input 4. Analog Audio Input Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---". Change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "---".
Setup 2. Speaker 1. Configuration Change the settings of connection environment of the speakers. Speaker Channels (Default Value: 7.1 ch) Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or "5.1.2 ch" to suit the number of speaker channels connected. Subwoofer (Default Value: Yes) Set whether a subwoofer is connected or not.
Setup 2. Speaker 2. Crossover Change the settings of crossover frequencies. Front Center Height Surround Surround Back LPF of LFE Double Bass (Default Value: 100 Hz) (Default Value: 100 Hz) (Default Value: 100 Hz) (Default Value: 100 Hz) (Default Value: 100 Hz) (Default Value: 120 Hz) (Default Value: On) Front: Select the crossover frequency from "40 Hz" to "200 Hz" to start outputting frequencies for each channel. "Full Band": Full band will be output.
Setup 2. Speaker 3. Distance 4. Level Calibration Set the distance from each speaker to the listening position. Front Left Center Front Right Height Left Height Right Surround Right Surr Back Right Surr Back Left Surround Left Subwoofer (Default Value: 12.0 ft/3.60 m) (Default Value: 12.0 ft/3.60 m) (Default Value: 12.0 ft/3.60 m) (Default Value: 9.0 ft/2.70 m) (Default Value: 9.0 ft/2.70 m) (Default Value: 7.0 ft/2.10 m) (Default Value: 7.0 ft/2.10 m) (Default Value: 7.0 ft/2.
Setup 2. Speaker 5. Dolby Enabled Speaker 6. Equalizer Settings Change the settings of Dolby Enabled Speakers. • This setting can be selected when "Configuration" - "Height Speaker" is set to "Dolby Speaker". You can adjust the output volume of the range for each connected speaker. Adjust the volume of different sound ranges for each speaker. You can set three different equalizers in Preset 1 to 3.
2. Speaker Setup 7. Speaker Virtualizer The Speaker Virtualizer function can be switched between On and Off. Speaker Virtualizer (Default Value: On) On Off Listening modes such as T-D that have virtual speaker effects can be selected. Listening modes such as T-D that have virtual speaker effects cannot be selected.
Setup 3. Audio Adjust 1. Multiplex/Mono 2. Dolby Change the settings of multiplex audio playback. Change the setting of when Dolby signals are input. Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. button on the remote • For multiplex audio broadcasts, pressing the controller will display "1+1" on the main unit’s display.
3. Audio Adjust Setup 4. LFE Level Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals. LFE Level (Default Value: 0 dB) Select the low-frequency effect (LFE) level of each signal from "0 dB" to "-∞ dB". If the low-frequency effect sound is too strong, select "-20 dB" or "-∞ dB". 5. Volume Change the Volume settings. Mute Level (Default Value: -∞ dB) Set the volume lowered from the listening volume when muting is on.
Setup 4. Source 1. My Input Volume Audio Select Set a volume value for each input selector. Select the priority for input selection when multiple audio sources are connected to one input selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each input selector button. Select the input selector to configure. Note that there are some default values you cannot change.
Setup 4. Source Analog When giving priority to the input signal from AUDIO IN jacks • This item can be selected only when the input to be set is assigned to the AUDIO IN jack in the "1. Input/Output Assign" - "Analog Audio Input" setting. PCM Fixed Mode (Default Value: Off) Select whether to fix input signals to PCM (except multi-channel PCM) when you select "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting.
5. Listening Mode Preset Setup You can preset your favorite listening mode to each input. (For example, you can always apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged sound field.) When the list of input sources is displayed, set the signal type and listening mode. Although it is possible to select the listening mode during playback, the selected mode will be reset when the unit enters standby mode.
Setup 6. Hardware 1. HDMI HDMI Standby Through (Default Value: Auto (Eco)) Change the settings of the HDMI function. HDMI CEC (Default Value: On) Setting this to "On" enables the input selection link and other link functions with HDMI-connected CEC-compatible device. When this setting is changed, turn off and then on again the power of all connected devices. • Depending on the TV to use, a link setting may be required on the TV.
Setup 6. Hardware Audio TV Out (Default Value: Auto) You can enjoy audio through the speakers of the TV while this unit is on. • This setting is fixed to "Auto" if you set "1. Input/Output Assign" - "TV Out/ OSD" - "HDMI Out" or "HDMI" - "HDMI Out" in the "Quick Menu" to "MAIN" or "MAIN+SUB" and set "HDMI CEC" to "On". If you change this setting, set "HDMI CEC" to "Off". • Listening mode cannot be changed while "Audio TV Out" is set to "On" and audio is being output from the TV.
Setup 6. Hardware 2. Network Change the settings of the Network function. • When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each components, you must set "DHCP" to "Disable", assign an address to this unit in the "IP Address" setting, and set information related to your LAN, such as Subnet Mask and Gateway.
6. Hardware Friendly Name (Default Value: Integra DRX-2.4 XXXXXX) Change the model name of this unit which is displayed on the device connected to the network to an easily recognized name. 1. P ress Enter to display the Edit screen. 2. S elect a character or symbol with the cursors, and press Enter. Repeat this operation to input up to 31 characters. "A/a": Switches between upper and lower cases.
Setup 6. Hardware AirPlay Password (Default Value: -) You can set a password of up to 31 characters so that only users that have input can use AirPlay. 1. P ress Enter to display the Edit screen. 2. S elect a character or symbol with the cursors, and press Enter. Repeat this operation to input up to 31 characters. "A/a": Switches between upper and lower cases. (Pressing Mode on the remote controller also toggles between upper and lower cases) "←" "→": Moves the cursor in the arrow direction.
Setup 6. Hardware 3. Bluetooth Change the settings for the BLUETOOTH function. • Wait for a while if "Bluetooth" cannot be selected. It can be selected when the BLUETOOTH function is activated. (Bluetooth Receiver) Bluetooth Receiver (Default Value: On) Select whether or not to use the function that receives audio from BLUETOOTH wireless technology enabled devices.
Setup 6. Hardware Search Devices (Default Value: -) Search for a BLUETOOTH wireless technology enabled device that is able to receive the audio from this unit. Select "Start" then press Enter. A list of the names of BLUETOOTH wireless technology enabled devices that are able to receive is displayed. Select the device to be connected with the cursors / , then pairing begins when you press Enter.
Setup 6. Hardware 4. Power Management Change the settings for the power-save function. Sleep Timer (Default Value: Off) 30 minutes, 60 minutes, 90 minutes You can allow the unit to enter standby automatically when the specified time has elapsed. Select a value from "30 minutes", "60 minutes" and "90 minutes". Off Does not turn the unit to standby automatically.
Setup 6. Hardware Bluetooth Wakeup (Default Value: Off) This function wakes up the unit on standby by connecting a BLUETOOTH enabled device. On Off When this function is used • When this function is set to "On", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the Hybrid Standby mode where only the essential circuits operate.
Setup 6. Hardware 6. 12V Trigger B 7. 12V Trigger C Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER OUT B jack. Different settings can be set for each input selector. You can enable power link operation when you connect the unit and the external devices equipped with 12V trigger input jack. Set when outputting the control signal (maximum 12 V/25 mA) through the 12V TRIGGER OUT C jack. Different settings can be set for each input selector.
6. Hardware 8. Works with SONOS Change the settings to connect with the Sonos Connect. (SONOS-1/SONOS-2) Input Selector (Default Value: Off) Select the input selector to which the Sonos Connect is connected. • Selecting "Off" disables the interlock function with Sonos. Setup Preset Volume (Default Value: Main=Last / Zone 2=Last) You can set the volume beforehand for playing back the Sonos Connect.
Setup 7. Multi Zone 1. Zone 2 2. Remote Play Zone Change the settings for Zone 2. Change the settings for remote play. Select whether to adjust the volume on the integrated amplifier in the separate room or on this unit when outputting to Zone 2. When playing with AirPlay or Spotify Connect, or when using the Music Server function to play remotely from your PC, you can set whether to play in the main room (where this unit is located) or in a separate room (ZONE 2).
Setup 8. Miscellaneous 1. Tuner 3. Firmware Update Change the settings for Tuner. Change the settings for Firmware Update. AM/FM Frequency Step (North American models) (Default Value: 10 kHz / 0.2 MHz) Select a frequency step to suit your residential area. Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz". • When this setting is changed, all radio presets are deleted. AM Frequency Step (Australian and Asian models) (Default Value: 9 kHz) Select a frequency step to suit your residential area.
8. Miscellaneous Setup 5. Lock Lock the Setup menu so that the settings cannot be changed. Setup Parameter (Default Value: Unlocked) Lock the Setup menu so that the settings cannot be changed. Locked The menu is locked. Unlocked The menu is unlocked. 6. Factory Reset All the settings are restored to factory defaults. Factory Reset (Default Value: -) All the settings are restored to factory defaults. Select "Start" and press Enter.
Setup Web Setup Menu operations You can make the settings for the network function of this unit using an Internet browser on a PC, smartphone, etc. on the remote controller to display the Setup menu. 1. Press 2. Select "6. Hardware" - "Network" with the cursors, and then take a note of the IP address displayed in "IP Address". 3. Start the Internet browser on your PC, smartphone, etc. and enter the IP address of this unit in the URL field. 4. The screen for entering the user name and password is displayed.
Setup Initial Setup with Auto Start-up Wizard Operations TV’s REMOTE INPUT Inputs TV HDMI 1 HDMI 2 HDMI 3 TV When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for startup using simple operations following on-screen guidance. 1. Switch the input of the TV to the input connected to the unit. 2. Put batteries into the remote controller of this unit. 3.
Setup Network Connection Keyboard Input 1. A confirmation screen asking you whether to agree to the privacy statement is displayed during network setting. If you agree, select "Accept" and press Enter. 2. Select the type of connection to the network. To use the Chromecast built-in function to connect, select "Yes" and press Enter. The Google Home app is required to use the Chromecast built-in function. Download the Google Home app from Google Play or the App Store to your smart phone or tablet.
Setup 2. Multi Zone Sound Check Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in addition to the main room. 1. Place the supplied speaker setup microphone at the listening position, and connect it to the Setup Mic jack on the main unit. 3. ARC Setup If you have connected a TV that supports ARC, select "Yes" and press Enter. 4.
Setup Integra Control Pro Initial Setup Integra Control Pro (available on iOS and Android™ handsets) is a dedicated app available for free which allows you to use your handset as a remote controller. Along with basic operations such as switching input and adjusting the volume, you can also select a radio station or network service (internet radio or play of a music file) without looking at the TV. • To use Integra Control Pro, this unit needs to be connected to the same network as the mobile device. 1.
Troubleshooting Troubleshooting Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Troubleshooting When the unit is operating erratically Try restarting the unit Restarting this unit may solve the problem. Set the main unit to standby, then after waiting for 5 seconds or more, press and hold the On/Standby button of the main unit for at least 5 seconds, and then restart the unit. (The settings on this unit are kept.) If the problem persists after restarting the unit, unplug and plug the power cords or HDMI cable of this unit and connected devices.
Troubleshooting Troubleshooting Power When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
Troubleshooting No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV doesn't support the ARC function, along with connection by HDMI, connect the TV and this unit using a digital optical cable. ( →p48) No sound from a connected player • Change the input selector on this unit to the position of the jack to which the player is connected. • Check the digital audio output setting on the connected device.
Troubleshooting Noise can be heard • Using cable ties to bundle audio pin cables, power cords, speaker cables, etc. may degrade the audio performance. Do not bundle the cords. • An audio cable may be picking up interference. Change the position of the cables. The beginning of audio received by an HDMI IN cannot be heard • Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, audio output may not start immediately.
Troubleshooting About DTS signals • With media that switches suddenly from DTS to PCM, PCM playback may not start immediately. In such a case, stop playback on the player side for approx. 3 seconds or more. Then, resume playback. The playback will be performed normally. • DTS playback may not be performed normally on some CD and LD players even if the player and this unit are digitally connected. If some processing (e.g.
Troubleshooting Images flicker • The output resolution of the player may not be compatible with the resolution of the TV. If the player is connected to this unit with an HDMI cable, change the output resolution on the player. Also this may be solved by changing the screen mode on the TV. Video and audio are out of synch • Depending on the settings on your TV and connection environment, the video may be behind the audio.
Troubleshooting Cannot connect a BLUETOOTH wireless technology enabled device (PC, smartphone, etc.) to this unit • Check if the BLUETOOTH function of the BLUETOOTH enabled device is enabled. • Initialize the pairing information and perform pairing again. Firstly delete all the pairing information saved on this unit. In the Setup menu, select "6. Hardware" - "Bluetooth" - "Bluetooth Receiver" - "Pairing Information", then press Enter while "Clear" is displayed.
Troubleshooting Network function • • • • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. When the NET indicator is blinking, this unit is not properly connected to the home network. Unplug and plug the power cords of this unit and the router, or restart the router. If the desired router is not displayed in the access point list, it may be set to hide SSID, or the ANY connection may be off.
Troubleshooting USB storage device USB storage device is not displayed • • • • • Check if the USB storage device or USB cable is securely inserted to the USB port of the unit. Disconnect the USB storage device once from the unit, and then reconnect it. Performance of the hard disk that receive power from the USB port of the unit is not guaranteed. Depending on the type of content, the playback may not be performed normally. Check the types of supported file formats.
Troubleshooting ZONE B function Cannot output audio to ZONE B • To output audio to ZONE B, set the audio output destination for "Audio" - "Zone B" on Quick menu to "On (A+B)" or "On (B)" and also set "2. Speaker" - "Configuration" - "Zone 2 Preout" on the Setup menu to "Zone B". ( →p96) Multi-zone function Cannot ZONE-output the audio of externally connected AV components • To output audio from an externally connected AV component to ZONE 2, connect it to any of HDMI IN1 to IN3 jacks.
Troubleshooting Others Strange noise can be heard from the unit • If you have connected another device to the same outlet as this unit, strange noise may occur under the influence of the device. If the symptom is remedied by removing the power plug of the other device from the outlet, use different outlets for this unit and the device. The message "Noise Error" appears during AccuEQ Room Calibration • This can be caused by a malfunction in your speaker unit. Check the speaker output, etc.
Appendix Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Listening mode Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 7.1 DD (Dolby Audio - DD) (*1) (*1) (*1) (*2) (*2) DD+ (Dolby Audio - DD+) (*1) (*1) (*1) (*1) (*1) DTHD (Dolby Audio - TrueHD) (*1) (*1) (*1) (*1) (*1) 2.1.2 3.1.2 4.1.2 5.1.2 (*2) (*2) (*2) (*1) (*1) (*1) (*1) (*1) (*1) (*1) (*1) Atmos Atmos 2.0/2.1 Atmos 3.0/3.1 Atmos 4.0/4.
Appendix Listening mode DTS Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 7.1 2.1.2 3.1.2 4.1.2 5.1.
Appendix Listening mode Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 7.1 Multich (Multichannel) (*1) (*1) (*1) (*1) (*1) DSD (*1) (*1) (*1) (*2) (*2) Direct (*1) (*1) (*1) (*1) (*1) 2.1.2 (*1) 3.1.2 4.1.2 5.1.
Listening Mode buttons and Selectable Listening Modes Appendix Refer to the following table for the listening modes that can be selected with each listening mode button. Listening mode Listening Mode buttons Movie/TV Music Game Listening mode DD (Dolby Audio - DD) DTS DD+ (Dolby Audio - DD+) ES Discrete (DTS-ES Discrete) DTHD (Dolby Audio - TrueHD) ES Matrix (DTS-ES Matrix) Atmos DTS 96/24 Atmos 2.0/2.1 DTS-HD HR (DTS-HD High Resolution) Atmos 3.0/3.
Appendix Listening mode Listening Mode buttons Movie/TV Music Game Orchestra Unplugged Studio-Mix TV Logic Unplugged Game-RPG Game-Action Game-Rock Game-Sports AllCh Stereo Mono Music T-D (Theater-Dimensional) 149
Appendix Input Formats and Selectable Listening Modes You can select a variety of listening modes according to the audio format of the signal to be input. • Selectable listening modes when headphones are connected are Mono, Direct, and Stereo only.
Appendix Listening mode DTS (*2) Input format DTS 96/24 (*2) DTS Express (*2) DTS-HD HR (DTS-HD High Resolution) (*2) DTS-HD Master (DTSHD Master Audio) (*2) ES Discrete ES Matrix (DTS-ES (DTS-ES DTS:X Discrete) Matrix) (*5) (*5) DTS Neural:X (*6) DTS Virtual:X (*9) (*10) 2-channel signal input Analog / PCM Music file / DSD (*1) DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTS-HD HR / DTS-HD MSTR Multi-channel signal input Multich PCM DSD (*1) DD DD+ DTHD ATMOS DTS DTS 96/24 DTS Express DTS-HD
Appendix Listening mode Input format PCM (Multich PCM) (*2) DSD (*2)(*11) Mono Orchestra/ Unplugged/ Studio-Mix/ TV Logic/ GameAction/ Game-Rock/GameRPG/ Game-Sports (*7) AllCh T-D (TheaterStereo / Dimensional) Mono Music (*9) (*8) 2-channel signal input Analog / PCM Music file / DSD (*1) DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTS-HD HR / DTS-HD MSTR Multi-channel signal input Multich PCM DSD (*1) DD DD+ DTHD ATMOS DTS DTS 96/24 DTS Express DTS-HD HR DTS-HD MSTR DTS-ES Discrete DTS-ES Matrix
Appendix (*1) (*2) (*3) (*4) (*5) (*6) Y ou cannot select any mode other than Stereo, AllCh Stereo and Mono Music if the sampling rate is 5.6/11.2 MHz. A center speaker or surround speakers need to be installed. If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected. This can only be selected when no surround back speaker is connected. urround back speakers need to be installed.
Appendix Listening Mode Effects In alphabetical order AllCh Stereo This mode is ideal for background music. Stereo sound is played through the surround speakers as well as the front speakers, creating a stereo image.
Appendix DSur (Dolby Audio - Surr) This listening mode expands 2 ch or 5.1 ch input signals to 5.1 ch, 7.1 ch or 5.1.2 ch. This mode expands actual channels to more channels for playback according to the configuration of the connected speakers. Also, even if there is no speaker for expansion, for example when only front speakers are connected, audio of surround channel or height channel is virtually created for expansion playback.
Appendix DTS Express This mode faithfully reproduces the sound design recorded in the DTS Express audio format. DTS Express is an optional audio format based on 5.1 ch for Blu-ray Discs. It is possible to record a maximum of 7.1 channels with additional channels such as the surround back channel. It also supports low bit rates. • To enable transfer of this audio format, connect via an HDMI cable and set the audio output on the player to Bitstream output.
Appendix Game-Action T-D (Theater-Dimensional) This mode is suitable for games with a lot of action. In this mode, you can enjoy a virtual playback of multichannel surround sound even with only two or three speakers. This works by controlling how sounds reach the listener’s left and right ears. • This mode cannot be selected when "Speaker Virtualizer" ( →p108) is set to "Off" (Default: On). Game-Rock This mode is suitable for games with rock content.
Appendix Speaker Combinations • Up to two powered subwoofers can be connected in either combination. Speaker Channels FRONT CENTER SURROUND SURROUND BACK HEIGHT Bi-AMP ZONE 2 (ZONE SPEAKER) 2.1 ch (*1) (*1) 3.1 ch (*1) (*1) 4.1 ch (*1) (*1) (*1) (*1) 5.1 ch 6.1 ch (*2) 7.1 ch (*2) 2.1.2 ch (*3) (*1) (*3) (*1) 3.1.2 ch (*3) (*1) (*3) (*1) 4.1.2 ch (*4) 5.1.2 ch (*4) (*1) You can select either Bi-AMP or ZONE SPEAKER.
Appendix General Specifications Amplifier Section North American models Australian and Asian models Rated Output Power With 8 ohm loads, both channels driven, from 2020,000 Hz; rated 80 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
Appendix Tuner Section FM Tuning Frequency Range 50 dB quieting sensitivity (FM MONO) AM Tuning Frequency Range North American models Australian and Asian models 87.5 MHz - 107.9 MHz 87.5 MHz - 108.0 MHz, RDS 1.0 μV, 11.2 dBf (IHF, 1 kHz, 100% MOD) 530 kHz - 1710 kHz 522/530 kHz - 1611/1710 kHz Preset Channel 40 BLUETOOTH Section Communication system North American models BLUETOOTH Specification version 4.2 Frequency band 2.
Appendix 2 ch linear PCM: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Audio Format Multi-channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Bitstream: Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS, DTS-ES, DTS 96/24, DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS Express, DTS:X, DSD(2.
Appendix Corresponding input Frame rate resolutions 4K 24/25/30 Hz (3840x2160p) 4K SMPTE (4096x2160p) 48/50/60 Hz Color space YCbCr4:2:2 YCbCr4:4:4/RGB YCbCr4:2:0 YCbCr4:2:2 YCbCr4:4:4/RGB 100/120 Hz 5K (5120x2160p) 24/25/30 Hz 48/50/60 Hz 8K (7680x4320p) 24/25/30 Hz 48/50/60 Hz YCbCr4:2:0 YCbCr4:2:2 YCbCr4:4:4/RGB YCbCr4:2:2 YCbCr4:4:4/RGB YCbCr4:2:0 YCbCr4:2:2 YCbCr4:4:4/RGB YCbCr4:2:0 YCbCr4:2:2 YCbCr4:4:4/RGB YCbCr4:2:0 Color Depth 12 bit 8 bit 10/12 bit 8 bit 10/12 bit 12 bit 8 bit 10/12 bit
Appendix Network Section North American models Australian and Asian models Ethernet LAN 1 (10BASE-T/100BASE-TX) Wireless LAN IEEE 802.11 a/b/g/n/ac standard (Wi-Fi ® standard) 5 GHz/2.4 GHz band ¢ Music Server ( →p91) Supported Audio Formats MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR WMA (.wma) • 44.1 kHz, 48 kHz/Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.
Appendix USB Section USB ¢ USB Storage Device ( →p88) Supported Audio Formats North American models Australian and Asian models 1 (Rear : Ver.2.0, 5V/1 A) MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR WMA (.wma) • 44.1 kHz, 48 kHz/Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.
Appendix General North American models Australian and Asian models AC 120 V, 60 Hz AC 220 - 240 V, 50/60 Hz 460 W 450 W Full Standby mode 0.10 W 0.15 W Network Standby (wired) 1.6 W 1.7 W Power Supply Power Consumption Network Standby (wireless) 1.7 W Bluetooth Wakeup 1.6 W 1.7 W HDMI CEC 0.10 W 0.15 W Standby mode (ALL ON) 1.7 W 1.8 W 2.7 W 2.
Appendix Audio Outputs North American models Australian and Asian models PRE/LINE OUT (ZONE 2)(*) × 1 PRE OUT (SUBWOOFER) × 2 *Can be changed to LINE OUT (ZONE B) and PRE OUT (FRONT). Analog 9 (FRONT L/R, CENTER, SURROUND L/R, HEIGHT L/R or SURROUND BACK L/R, ZONE 2 L/R) • North American models are banana plug ready. Speaker Outputs Phones 1 (ø 6.
SN 29403940_EN © Copyright 2020 Onkyo & Pioneer Corporation Japan. All rights reserved. F2006-0 https://www.onkyo.
