Owner's Manual

10
Part Names
Front Panel
10
98765
32
1 4
11 12 13 14
1. On/Standby button
2. Hybrid Standby indicator: Lights up when any
of the following functions is working or enabled
in standby state of this unit. When this indicator
is lighting, the power consumption in standby
state increases, however, the increase in power
consumption is minimized by entering the Hybrid
Standby mode where only the essential circuits
operate.
– HDMI CEC ( →p124)
– HDMI Standby Through ( →p124)
– USB Power Out at Standby ( →p131)
– Network Standby ( →p131)
– Bluetooth Wakeup ( →p132)
3. Tone button: You can adjust the sound quality of
the speakers. Press the Tone button to select an
item to adjust from "Bass", "Vocal" and "Treble",
and press + and - to adjust.
4. Remote control sensor: Receives signals from
the remote controller.
• The reception range of the remote controller
is within a distance of approx. 16´/5 m, and
an angle of 20° in vertical direction and 30° to
right and left.
5. Listening Mode button: Press "Movie/TV",
"Music" or "Game" button to change the listening
mode. ( →p71).
6. Display ( →p12)
7. Dimmer button: Switches the brightness of the
display with three levels. It cannot be turned off
completely.
8. Memory button: Used to register AM/FM radio
stations. ( →p70)
9. Tuning Mode button: Used to switch between
automatic tuning and manual tuning for AM/FM
stations. ( →p67)
10. Info button: Switches the information on the
display. ( →p72)
11. Setup button: You can display advanced setting
items on the TV and the display to have a more
enjoyable experience with this unit. ( →p104)
12. Cursor buttons ( / / / ) and Enter
button: Select an item with the cursors, and
press Enter to conrm your selection. When
using TUNER, use them to tune in to stations.
( →p67)
13. Return button: Returns the display to the
previous state while setting.
14. Master Volume