Specifications

ManualsBrandsIntegra ManualsAudio ReceiversIntegra 9.2 Channel Black Network AV Receiver

Video & Audio Support

• 9-ch amp supports 5.2.4, 7.2.2, or 7.2.4

Dolby Atmos

and DTS:X

playback

• IMAX

Enhanced*

certified for IMAX

digital remasters

• Dolby Atmos Height Virtualization

technology

• Dolby Surround

and DTS

Neural:X upmixing technology

• 4K/60p, HDR (HDR10, HLG, Dolby Vision

™

), BT.2020, and 4:4:4/24-bit video pass-

through with HDCP 2.2

• 11.2-channel pre-outs and DSP processing for 7.2.4-ch

layouts

• Separate switching Zone 2 outputs and assignable Zone 3 outputs with DACs for unique

or synced D/A source distribution (including HDMI/SPDIF

)

• Zone 2 pre-/line-out/Zone B line-out shares unique/synced D/A audio

in both rooms or

connect a compatible wireless headphone transmitter

• Built-in phono equalizer (MM) and SACD playback via HDMI

(2.8 MHz/2-ch/multi)

• AccuEQ Advance 9-point calibration with subwoofer EQ and AccuReflex

™

• HDMI Sub/Zone 2 output shares media to a projector or second display

• Easy DSP-based Vocal Enhancer clarifies in-program dialog

Amplication Technology

• 185 W per channel (6 Ω, 1 kHz, 10%, 1 channel driven)

175 W per channel (6 Ω, 1 kHz, 1%, 1 channel driven, IEC)

• THX

Certified Select

™

for Cinema Reference Sound

• Low-impedance amp system with 4-ohm speaker-driving capability

• Massive custom transformer and customized 10,000 μF capacitors

• Thick copper bus-bar connects capacitors to amplifiers

• Hand-selected audio-tuned parts on separated digital/analog circuit boards

• Extruded anti-resonant aluminum heat-sink

• Non-phase-shift amp-circuit topology with 10 Hz–100 kHz frequency

response

• High-performance 384 kHz/32-bit D/A conversion (AKM AK4458)

• VLSC

™

(Vector Linear Shaping Circuitry) filtering technology (Front L/R)

• Front L/R speaker bi-amping capability in 5.2/7.2/5.2.2-ch configuration

• Independent tone controls for all channels (including Zone 2)

Network Features and Multi-Zone Audio

• Quad-core SoC (System on a Chip) supports 802.11ac 2x2 MIMO

Wi-Fi

• Supports Amazon Music, Spotify

, TIDAL, TuneIn, and Deezer

• Works with Sonos certified for the Sonos Home Sound System

• Chromecast built-in

and voice control with the Google Assistant

• AirPlay 2 multi-room audio and voice control with Siri

*10

• DTS Play-Fi

multi-room audio via Integra Music Control App

*11

• FlareConnect

™*12

multi-zone audio with compatible components

• Supports Integra Remote control and music streaming app

*11

• Hi-Res Audio playback via network (DSD 11.2 MHz/5.6 MHz/2.8 MHz

*13

;

FLAC, WAV [RIFF], AIFF, and ALAC to 192 kHz/24-bit

*14

)

Audio-Video Connections

• 7 HDMI inputs (1 front), Main output (ARC), Sub/Zone 2 output

• 2 digital audio inputs (1 optical and 1 gold-plated coaxial, assignable)

• 7 gold-plated analog audio inputs (1 front)

• Gold-plated phono input (MM) for turntable connection

• USB input (5 V/1 A) for audio playback (rear)

• 3.5 mm AccuEQ Advance setup mic input (front)

• 3 gold-plated composite video inputs (1 front)

• 1 gold-plated component video input (assignable)

• 6.3 mm gold-plated headphone jack

• 11 transparent gold speaker posts (including Zone 2)

• 11.2-channel pre-outs (including Zone 3 pre-/line-out)

• Gold-plated Zone 2/Zone B line-level output (analog RCA)

• 2 subwoofer pre-outs

Custom Integration Features

• Bi-directional Ethernet LAN for IP control and dealer setup

• RS-232 serial port for external control and automation

• 2 IR inputs and 1 output

• Programmable 12 V trigger-outs with adjustable delay (A: 100 mA, B: 25 mA, C: 25 mA)

• Dealer-settings memory storage and recall function

• OSD output function for installers

• Thick detachable IEC power cable

• Optional rack-mount kit (IRK-155-3D)

Additional Features

• Aluminum front panel and volume control

• Stereo Assign Mode supports Height-channel playback

• Volume memory-presets for A/V inputs via front panel

• Bluetooth

Version 4.2 (Profile: A2DP v1.2, AVRCP v1.3)

• Advanced Music Optimizer

™

improves quality of compressed audio

• High-definition GUI over HDMI featuring source input/output data display

• Super Resolution 1080p to 4K video upscaling via HDMI

• Volume memory-presets for A/V inputs via front panel

• Sleep timer, HDMI passthrough, and network standby

• 40 FM/AM/internet radio presets with station-naming (10 characters)

• A/V Sync Control (Up to 500 ms in 1 ms Steps at 48 kHz)

• Crossover Adjustment (40/45/50/55/60/70/80/90/100/110/120/130/150/180/200 Hz)

• 3-Mode display dimmer (Normal/Dim/Dimmer)

*1 Requires connection of an external power amp via multichannel pre-outs. *2 Enabled with a future firmware

update. *3 Zone 2 HDMI audio is available on inputs 1–3. SPDIF and HDMI support PCM signals only. Zone 3

supports analog/NET/Bluetooth. Simultaneous playback of multiple audio sources is enabled in Main, Zone 2,

and Zone 3. Output via Zone 2 speaker outputs and Zone 2/Zone B line-out is enabled. *4 When set to Zone B,

the same encoded or PCM audio playback in Main is enabled in Zone B. *5 Some countries or regions have

regulations that affect wireless signal strength and the use of Wi-Fi channels. *6 Service availability varies with

region, and a paid subscription may be required to access some or all features. *7 Requires a Sonos Connect

(sold separately). Sonos Music Control App is available free for iPhone, iPad, and Android™ devices. Please

check device and OS requirements before download and installation. *8 The unit may automatically download

and apply an Over-the-Air software update during setup. *9 Voice control requires a smart speaker featuring

the Google Assistant. *10 Voice control with Siri requires an Apple HomePod. *11 Available free for iPhone,

iPad, and Android devices. Please check device and OS requirements before download and installation.

*12 FlareConnect is a proprietary network protocol that shares audio between compatible products. For details

on product compatibility, please visit the Integra website. *13 Converted to PCM. Playback not guaranteed via

wireless LAN. *14 Supported sampling rates may vary depending on network environment. ALAC is supported

to a maximum 96 kHz.

DRX-4.3

INSPIRED BY PASSION - DRIVEN BY EXCELLENCE

9.2-Channel Network A/V Receiver

Get Together for a Gold-Class Film Experience

With more distortion-free power, IMAX® Enhanced* certification for IMAX® remastered movies, and Dolby Atmos® or

DTS:X® surround-sound reproduction through 5.2.4 channels, the Integra DRX-4.3 opens the door to gold-class home cinema

complete with powered or wireless audio distribution to your favorite rooms.

* Enabled with a future firmware update.

Summary of content (2 pages)

PAGE 1
DR X-4.3 R 9.2-Channel Network A/V Receiver Get Together for a Gold-Class Film Experience With more distortion-free power, IMAX® Enhanced* certification for IMAX® remastered movies, and Dolby Atmos® or DTS:X® surround-sound reproduction through 5.2.4 channels, the Integra DRX-4.3 opens the door to gold-class home cinema complete with powered or wireless audio distribution to your favorite rooms. * Enabled with a future firmware update.
PAGE 2
DR X-4.3 R 9.2-Channel Network A/V Receiver Specifications Amplifier Section Video Section Power Output Front L/R: Signal Level 185 W/Ch at 6 Ω, 1 kHz, 10%, 1 Channel Driven, 175 W/Ch at 6 Ω, 1%, 1 kHz, 1 Channel Driven, IEC 1 Vp-p/ 75 Ω Composite Video 1 Vp-p/75 Ω Component Video (Y) 0.7 Vp-p/75 Ω Component Video (Pb/Pr) Tuner Section Dynamic Power: 250 W (3 Ω, Front) 220 W (4 Ω, Front) 130 W (8 Ω, Front) Tuning Frequency Range: FM 87.