Instruction Manual AV Receiver DRX-5.
Table of contents Firmware Update Speaker Layout Troubleshooting Main Room Supplementary Information Z Zone 2 Speaker Connections Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off".
Before starting the procedure Firmware Update Update Information of the firmware Firmware Update Procedure Part Names Front Panel Display Rear Panel Remote Controller Inputting Characters Speaker Layout The listening room and the speaker layout 5.1 Channel System 7.1 Channel System 5.1.2 Channel System 7.1.2 Channel System 5.1.4 Channel System 7.1.
Network Connection Connecting External Control Devices IR IN/OUT port 12V TRIGGER OUT jack Connecting the Power Cord 68 69 69 70 71 Playing audio from an externally connected device Basic Operations BLUETOOTH® Playback Playing audio from BLUETOOTH wireless technology enabled devices with this unit Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices Listening To the Radio Listening To the AM/FM Radio Presetting a Radio Station Listening Mode Selecting a Listening mode Quick M
Displaying Your Favorite Video on TV While Playing Music Playing music files saved on a USB storage device USB Storage Device Requirements Music Server Windows Media® Player 12 settings Playing Back Play Queue Adding Play Queue Information Sort and Delete Playing Back Connecting a transmitter for playback Connections Setting Up Playing Back 104 105 106 107 107 108 110 110 110 111 112 112 112 112 Setup Menu Menu list 1. Input/Output Assign 2. Speaker 3. Audio Adjust 4. Source 5. Listening Mode Preset 6.
Appendix Speaker Layouts and Selectable Listening Modes Listening Mode buttons and Selectable Listening Modes Input Formats and Selectable Listening Modes Listening Mode Effects Speaker Combinations General Specifications 178 181 183 187 194 196 6
Before starting the procedure What's in the box Note • Connect speakers with an impedance of 4 Ω to 16 Ω. • The power cord must be connected only after all other connections are completed. • We will not accept any responsibility for damage arising from the connection with equipment manufactured by other companies. • Network services and content that can be used may no longer be available if new functions are added by updating firmware or the service providers terminate their services.
Firmware Update This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one. In such a case, new functions may be added from the start. For how to confirm the latest firmware contents and the firmware version of your product, see the following section.
represents an alphanumeric character.) Refer to the following descriptions and check. Error Code • -01, -10: Ethernet cable not found. Connect the Ethernet cable properly. • -02, -03, -04, -05, -06, -11, -13, -14, -16, -17, -18, -20, -21: Internet connection error. Check the following: –– Whether the router is turned on –– Whether this unit and the router are connected via the network Unplug and plug the power cords of this unit and the router. This may solve the problem.
4. Connect the USB storage device to the USB port of this unit. • If an AC adapter is supplied with the USB storage device, connect the AC adapter, and use it with a household outlet. • If the USB storage device has been partitioned, each section will be treated as an independent device. 5. Press . The Setup menu is displayed on the TV screen. 6. Select "8. Miscellaneous" - "Firmware Update" - "Update via USB" with the cursors in order, then press Enter.
Part Names Front Panel A B C D E F G A On/Standby button B Hybrid Standby indicator: Lights up when any of the following functions is working or enabled in standby state of this unit. When this indicator is lighting, the power consumption in standby state increases, however, the increase in power consumption is minimized by entering the Hybrid Standby mode where only the essential circuits operate.
Front Panel V AUX Input HDMI jack: Connect a video camera, etc. using an HDMI cable. ( →p63) PQR S T P Zone 2 button: Controls the multi-zone function. ( →p100) Off button: Switches the multi-zone function off. Q Zone 3 button: Controls the multi-zone function. ( →p102) Off button: Switches the multi-zone function off. R Whole House Mode button: Enable the WHOLE HOUSE MODE function to play the same source in all rooms that are multi-zone- U V connected.
Display 1 2 3 6 A Speaker/Channel display: Displays the output channel that corresponds to the selected listening mode. B Lights in the following conditions. : Headphones are connected. Z2/Z3: ZONE 2/ZONE 3 is on. : Connected by BLUETOOTH. : Connected by Wi-Fi. NET: Lights when connected to the network with the "NET" input selector. It will blink if incorrectly connected to the network. USB: Lights when the "NET" input selector is selected, a USB device is connected and the USB input is selected.
Rear Panel A B C D E 6 A DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. B TUNER AM/FM terminal: Connect the supplied antennas. C COMPONENT VIDEO IN jacks: Input AV component video signals with a component video cable. (Compatible only with 480i or 576i resolution.) VIDEO IN jacks: Input AV component video 7 H I monitor such as a TV or projector.
Rear Panel SUBWOOFER PRE OUT jack. R ZONE 3 PRE/LINE OUT jacks: Output audio signals with an analog audio cable connected to an integrated amplifier in a separate room (ZONE 3). HEIGHT 2 PRE OUT jacks: Connect a power amplifier. ( →p55) S ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio cable connected to an integrated amplifier in a separate room (ZONE 2).
Remote Controller A G H B C D I E F J K A On/Standby button B Input selector buttons: Switches the input to be played. C Play buttons: Used for playback operations for the Music Server ( →p107) or USB device ( →p105). Also, switching to "CEC MODE" with "19. Mode button" allows you to operate an HDMI CEC function-enabled AV component. (Some devices may not be operated.
Remote Controller L Tone buttons: Adjusts the sound quality. Press "Treble", "Bass", or "Vocal" to select what you want to adjust, then adjust with + and -. Treble/Bass button: You can adjust the sound quality of the speakers. 1.Press Treble or Bass to select the content to adjust. Treble: Enhances or moderates the high-tone range of the speakers. Bass: Enhances or moderates the low-tone range of the speakers. 2. Press + or - to adjust.
Inputting Characters You can input characters or symbols on the keyboard displayed on the TV screen such as when inputting a password for Wi-Fi Setup ( →p138) or naming a preset radio station ( →p133). 1. Select a character or symbol with the cursors / / / on the remote controller and press the Enter button. 2. When saving characters after input, select "OK" and press the Enter button. , / / / Enter . / ; : • Select "A/a" to switch between upper and lower cases.
Speaker Layout This unit can be used in different ways, depending on the layout of the speakers you are installing. Select the speaker layout that suits the installation environment, then confirm the methods for installation and connection. Speaker Layout 5.1ch 7.1ch 5.1.2ch Speaker layout ( →p21) Speaker Installation ( →p30) Speaker Connections ( →p36) Speaker Combinations ( →p194) 7.1.2ch 5.1.4ch 7.1.
The listening room and the speaker layout Speaker Layout A ZONE A Speakers The speaker system set up in the main room (where this unit is located). B ZONE 2 Speakers The 2 ch speaker system set up in a separate room (ZONE 2). This enables you to play the same source in the main room and the separate at the same time, or to play separate sources. C ZONE 3 Speakers The 2 ch speaker system set up in a separate room (ZONE 3).
5.1 Channel System Basic system ( →p31) Speaker Layout This is a basic 5.1 Channel System. 5.1 ch + ZONE 2 ( →p31) Main Room 5.1 ch + ZONE 2/ZONE 3 ( →p31) Main Room Zone 2 Zone 2 Zone 3 5.1 ch (Bi-Amping (Front)) ( →p31) 5.1ch 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
7.1 Channel System Basic system ( →p31) Speaker Layout This is a 7.1 Channel System that consists of the basic 5.1 Channel System and added surround back speakers. 7.1 ch + ZONE 2 ( →p31) 7.1 ch (Bi-Amping (Front)) ( →p31) Main Room Zone 2 5.1ch 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
5.1.2 Channel System Speaker Layout A Speaker System that is a 5.1 Channel System with one set of height speakers added. 5.1.2 ch (Front High or Rear High) ( →p32) 5.1.2 ch (Top Front or Top Middle or Top Rear) ( →p32) 5.1.2 ch + ZONE 2 ( →p32) 5.1.2 ch + ZONE 2/ZONE 3 ( →p32) Main Room 5.1.2 ch (Dolby Enabled Speakers (Front or Surround)) ( →p32) 5.1.2 ch (Bi-Amping (Front)) ( →p32) 5.1ch Main Room 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch Zone 2 Zone 2 Zone 3 7.1.
7.1.2 Channel System 7.1.2 ch (Front High or Rear High) ( →p33) Speaker Layout A Speaker System that is a 7.1 Channel System with one set of height speakers added. 7.1.2 ch (Top Front or Top Middle or Top Rear) ( →p33) 7.1.2 ch (Dolby Enabled Speakers (Front or Surround or Surround Back)) ( →p33) 7.1.2 ch + ZONE 2 ( →p33) 5.1ch Main Room 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch Zone 2 7.1.
5.1.4 Channel System Speaker Layout A Speaker System that is a 5.1 Channel System with two sets of height speakers added. 5.1.4 ch (Front High and Rear High) ( →p34) 5.1.4 ch (Front High and Top Middle) ( →p34) 5.1.4 ch (Front High and Dolby Enabled Speakers (Surround)) ( →p34) 5.1.4 ch (Top Front and Top Rear) ( →p34) 5.1.4 ch (Front High and Top Rear) ( →p34) 5.1.4 ch (Top Front and Rear High) ( →p34) 5.1ch 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Layout 5.1.4 Channel System 5.1.4 ch (Top Front and Dolby Enabled Speakers (Surround)) ( →p34) 5.1.4 ch (Top Middle and Rear High) ( →p34) 5.1.4 ch (Dolby Enabled Speakers (Front) and Rear High) ( →p34) 5.1.4 ch (Dolby Enabled Speakers (Front) and Top Rear) ( →p34) 5.1.4 ch (Dolby Enabled Speakers (Front and Surround)) ( →p34) 5.1.4 ch + ZONE 2 ( →p34) 5.1ch Main Room 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch Zone 2 7.1.
7.1.4 Channel System Speaker Layout A Speaker System that is a 7.1 Channel System with two sets of height speakers added. 7.1.4 ch (Front High and Rear High) ( →p35) 7.1.4 ch (Front High and Top Middle) ( →p35) 7.1.4 ch (Front High and Dolby Enabled Speakers (Surround)) ( →p35) 7.1.4 ch (Front High and Dolby Enabled Speakers (Surround Back)) ( →p35) 7.1.4 ch (Front High and Top Rear) ( →p35) 7.1.4 ch (Top Front and Top Rear) ( →p35) 5.1ch 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Layout 7.1.4 Channel System 7.1.4 ch (Top Front and Rear High) ( →p35) 7.1.4 ch (Top Front and Dolby Enabled Speakers (Surround)) ( →p35) 7.1.4 ch (Top Front and Dolby Enabled Speakers (Surround Back)) ( →p35) 7.1.4 ch (Top Middle and Rear High) ( →p35) 7.1.4 ch (Dolby Enabled Speakers (Front and Surround)) ( →p35) 7.1.4 ch (Dolby Enabled Speakers (Front and Surround Back)) ( →p35) 5.1ch 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Layout 7.1.4 Channel System 7.1.4 ch (Dolby Enabled Speakers (Front) and Rear High) ( →p35) 7.1.4 ch (Dolby Enabled Speakers (Front) and Top Rear) ( →p35) 7.1.4 ch + ZONE 2 ( →p35) Main Room Zone 2 5.1ch 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Installation Setting Up the Speakers How the speakers are set up depends on the size and shape of the room, so here we introduce just a basic layout example.
Speaker Installation 5.1 Channel System FL SW C 7.1 Channel System FL FR SW b SL SR SW SL, SR SBR a: 22° to 30°, b: 90° to 110°, c: 135° to 150° a: 22° to 30°, b: 120° Place the left and right front speakers to match ear height. The center speaker should be set up facing the listening position at an angle. Place the powered subwoofer between the center speaker and a front speaker. Place the left and right surround speakers to be just above ear height.
Speaker Installation 5.1.2 Channel System Top Speakers TFL High Speakers FHL FHR a: 22° to 30° b: 120° TML TFR TRL TMR 3´ (0.9 m) or more TRR a: 30° to 55° b: 65° to 100° c: 125° to 150° c b a a b RHL RHR 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the front speakers, angled to face the listening position. RHL, RHR Place the rear high speakers so the lateral distance matches the front speakers, angled to face the listening position.
Speaker Installation 7.1.2 Channel System Top Speakers TFL High Speakers FHL a: 22° to 30° b: 90° to 110° c: 135° to 150° FHR 3´ (0.9 m) or more TRL TML TFR TMR TRR a: 30° to 55° b: 65° to 100° c: 125° to 150° c b a a b RHL c RHR 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the front speakers, angled to face the listening position. RHL, RHR Place the rear high speakers so the lateral distance matches the front speakers, angled to face the listening position.
Speaker Installation 5.1.4 Channel System Top Speakers TFL High Speakers FHL FHR a: 22° to 30° b: 120° TML TFR TRL TMR 3´ (0.9 m) or more TRR a: 30° to 55° b: 65° to 100° c: 125° to 150° c b a a b RHL RHR 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the front speakers, angled to face the listening position. RHL, RHR Place the rear high speakers so the lateral distance matches the front speakers, angled to face the listening position.
Speaker Installation 7.1.4 Channel System Top Speakers TFL High Speakers FHL a: 22° to 30° b: 90° to 110° c: 135° to 150° FHR 3´ (0.9 m) or more TRL TML TFR TMR TRR a: 30° to 55° b: 65° to 100° c: 125° to 150° c b a a b RHL c RHR 3´ (0.9 m) or more FHL, FHR Place the front high speakers directly above the front speakers, angled to face the listening position. RHL, RHR Place the rear high speakers so the lateral distance matches the front speakers, angled to face the listening position.
Speaker Connections (Before starting the procedure) Speakers you can use with this unit and cable connections 37 A B C 4-16Ω Speaker Connections Connect the Subwoofer 5.1 Channel System 7.1 Channel System 5.1.2 Channel System 7.1.2 Channel System 5.1.4 Channel System 7.1.4 Channel System Connecting a Power Amplifier 38 39, 40, 41 42, 43, 44 45, 46, 47, 48 49, 50 51, 52 53, 54 55 5.1ch 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speakers you can use with this unit and cable connections Speaker Connections Speakers you can use with this unit This unit supports speakers with 4 Ω to 16 Ω impedance. For speaker impedance, check the speaker instruction manual. (Note) Speaker Impedance If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance" to "4ohms" for "Speaker Setup" in the Initial Setup section ( →p154).
Speaker Connections Connect the Subwoofer Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack. a 5.1ch 7.1ch 5.1.2ch 7.1.2ch 5.1.4ch a Subwoofer cable 7.1.
Speaker Connections 5.1 Channel System FL SL SW C FR SR 5.1ch 7.1ch FR FL C SR SL SW 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 5.1 Channel System + ZONE SPEAKER MAIN ROOM FL SW C SL SR ZONE 2 FL(Z2) FR ZONE 3 FR(Z2) FL(Z3) FR(Z3) 5.1ch 7.1ch FR FL C SR SL FR FL (Z3) (Z3) FR FL (Z2) (Z2) SW To output audio from an externally connected AV component to ZONE 3, use an analog audio cable for connection. Note that ZONE 3 output is not possible with the connection using a HDMI cable, digital coaxial cable, or digital optical cable. 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 5.1 Channel System (Bi-Amping the Speakers) FL SL SW C FR SR High: High High: Low: Low Low: 5.1ch 7.1ch FR C SR SL FL SW Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 7.1 Channel System FL SW C FR SL SR SBL SBR 5.1ch 7.1ch FR FL C SR SL SBR SBL SW 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 7.1 Channel System + ZONE SPEAKER MAIN ROOM FL SW C FR SL SR SBL SBR ZONE 2 FL(Z2) FR(Z2) 5.1ch 7.1ch FR FL C SR SL SBR SBL FR FL (Z2) (Z2) SW 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 7.1 Channel System (Bi-Amping the Speakers) FL SW C FR SL SR SBL SBR High: High High: Low: Low Low: 5.1ch 7.1ch FR C SR SL FL SBR SBL SW Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 5.1.2 Channel System HL FL SL HR SW C FR SR 5.1ch 7.1ch FR FL C SR SL HR HL *1 *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). SW 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 5.1.2 Channel System + ZONE SPEAKER MAIN ROOM HL FL HR SW SL C FR SR ZONE 2 FL(Z2) FR(Z2) 5.1ch 7.1ch FR FL C SR SL HR HL *1 *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). FR FL (Z2) (Z2) SW 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 5.1.2 Channel System + ZONE 2/ZONE 3 SPEAKER MAIN ROOM HL FL HR SW C FR SL SR ZONE 3 ZONE 2 FL(Z2) FR(Z2) FL(Z3) FR(Z3) 5.1ch 7.1ch FR FL C SR SL HR HL *1 FR FL (Z3) (Z3) • While ZONE 2/ZONE 3 playback is being performed, Height 1 speakers installed in the main room cannot play audio. *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). FR FL (Z2) (Z2) SW 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 5.1.2 Channel System (Bi-Amping the Speakers) HL FL SL HR SW C FR SR High: High High: Low: Low Low: 5.1ch 7.1ch FR C SR SL FL HR HL SW *1 5.1.2ch Be sure to remove the jumper bar connecting between the woofer jacks and tweeter jacks of the Bi-Amping supported speakers. Refer to the instruction manual of your speakers as well. 7.1.2ch *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). 5.1.
Speaker Connections 7.1.2 Channel System HL FL HR SW C FR SL SR SBL SBR 5.1ch 7.1ch FR FL C SR SL HR HL SBR SBL *1 *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). SW 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 7.1.2 Channel System + ZONE SPEAKER MAIN ROOM HL HR FL SW C FR SL SR SBL SBR ZONE 2 FL(Z2) FR(Z2) 5.1ch 7.1ch FR FL C SR SL HR HL SBR SBL *1 • While ZONE 2 playback is being performed, Height 1 speakers installed in the main room cannot play audio. *1 Connect the Height Speakers you have actually installed (HL/HR: Height Speakers, Top Speakers, Dolby Enabled Speakers). FR FL (Z2) (Z2) SW 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 5.1.4 Channel System HL1 FL HR1 SW C FR SL SR HL2 HR2 5.1ch 7.1ch FR FL C SR SL HR1 HL1 HR2 HL2 *1 SW *2 *1 Connect the Height Speakers you have actually installed (HL1/HR1: Front Height Speakers, Top (front side) Speakers, Dolby Enabled Speakers (Front)). *2 Connect the Height Speakers you have actually installed (HL2/HR2: Rear Height Speakers, Top (rear side) Speakers, Dolby Enabled Speakers (Surround)). 5.1.2ch 7.1.2ch 5.1.4ch 7.1.
Speaker Connections 5.1.4 Channel System + ZONE SPEAKER MAIN ROOM HL1 FL HR1 SW C FR SL SR HL2 HR2 ZONE 2 FL(Z2) FR(Z2) 5.1ch 7.1ch FR FL C SR SL HR1 HL1 HR2 HL2 *1 *2 FR FL (Z2) (Z2) SW • While ZONE 2 playback is being performed, Height 1 speakers installed in the main room cannot play audio. *1 Connect the Height Speakers you have actually installed (HL1/HR1: Front Height Speakers, Top (front side) Speakers, Dolby Enabled Speakers (Front)).
Speaker Connections 7.1.4 Channel System RHL TML RHR TMR FR FL SW C SL SR SBL SBR Power amplifier 5.1ch 7.1ch SBR SBL FR FL C SR SL HR1 HL1 HR2 HL2 *1 SW *2 *1 Connect the Height Speakers you have actually installed (HL1/HR1: Front Height Speakers, Top (front side) Speakers, Dolby Enabled Speakers (Front)). *2 Connect the Height Speakers you have actually installed (HL2/HR2: Rear Height Speakers, Top (rear side) Speakers, Dolby Enabled Speakers (Surround, Surround Back)). 5.1.2ch 7.
Speaker Connections 7.1.4 Channel System + ZONE SPEAKER MAIN ROOM RHL TML RHR TMR FR FL SW C SL SR SBL SBR ZONE 2 FL(Z2) FR(Z2) Power amplifier 5.1ch 7.1ch SBR SBL FR FL C SR SL HR1 HL1 HR2 HL2 *1 *2 FR FL (Z2) (Z2) SW • While ZONE 2 playback is being performed, Height 1 speakers installed in the main room cannot play audio. *1 Connect the Height Speakers you have actually installed (HL1/HR1: Front Height Speakers, Top (front side) Speakers, Dolby Enabled Speakers (Front)).
Connecting a Power Amplifier Power amplifier a Speaker Connections You can connect a power amplifier to the unit and use the unit as a pre-amplifier in order to produce a large volume that cannot be output with the unit only. Connect the speakers to the power amplifier. For details, refer to the power amplifier's instruction manual. • Use the PRE OUT jacks for connection as show on the left. Setup • Set "2.
Connections Connections Notes regarding connections with HDMI cables Connecting the TV Connecting the SUB Monitor Connecting Playback Devices Connecting a TV or Integrated Amplifier in a separate room (Multi-zone) Connecting Antennas Network Connection Connecting External Control Devices Connecting the Power Cord 57 58 59 60 64 67 68 69 71 56
Connections Notes regarding connections with HDMI cables HDMI (High-Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu-ray Disc players, game consoles, and other video components. With HDMI, a single cable can carry control signals, digital video, and digital audio. (Note) Placement of cables Putting a load on HDMI cables can lead to poor operational performance. Place the cables so there is no load put on them.
Connections Connecting the TV By connecting a TV to this unit, you can show the video from AV devices connected to this unit on the TV and also play the sound from the TV through this unit. SUB Monitor ( →p59) ZONE 2 ( →p64) To ARC/eARC TV Be sure to insert the HDMI cable all the way in. If the TV supports the ARC (Audio Return Channel) function(*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection.
Connections Connecting the SUB Monitor Be sure to insert the HDMI cable all the way in. SUB Monitor This unit has multiple HDMI OUT jacks, and another TV or projector can be connected to the HDMI OUT SUB jack. • Switch between MAIN and SUB using the HDMI Main/Sub button on the remote controller ( →p16) or "Quick Menu" ( →p83). Note that this jack is not ARC-compatible. • If devices with different resolutions are connected to HDMI OUT MAIN jack and SUB jack, images are output with the lower resolution.
Connections Connecting Playback Devices Connections to BD/DVD and GAME with HDMI jacks Be sure to insert the HDMI cable all the way in. This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.
Connecting a BD/DVD without HDMI Jack Mounted Connections This is a connection example of an AV component unequipped with an HDMI jack. Select cables that match the jacks of the AV component for connection. For example, when video input is connected to the BD/DVD jack, connect the audio input to BD/DVD jack, too. Thus, video input jacks and audio input jacks should have the same name for connection.
Connections Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using an analog audio cable. You can also connect a turntable that has an MMtype cartridge to the PHONO jack. • If the turntable has a built-in phono equalizer, connect it to any of the AUDIO IN jacks other than the PHONO jack.
Connections Connecting a Video Camera, etc. Connect a video camera, etc. to the AUX Input HDMI jack on the front panel using an HDMI cable. Be sure to insert the HDMI cable all the way in.
Connections Connecting a TV or Integrated Amplifier in a separate room (Multi-zone) Connecting a TV (ZONE 2) Be sure to insert the HDMI cable all the way in. While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2).
Connecting an Integrated Amplifier (ZONE 2) Connections You can enjoy 2 ch audio in the separate room (ZONE 2) while performing playback in the main room (where this unit is located). Use an analog audio cable to connect the ZONE 2 PRE/LINE OUT jacks on this unit to the input jack on an integrated amplifier in the separate room. • To output audio from an externally connected AV component to ZONE 2, connect it to any of HDMI IN1 to IN3 jacks.
Connections Connecting an Integrated Amplifier (ZONE 3) You can enjoy 2 ch audio in the separate room (ZONE 3) while performing playback in the main room (where this unit is located). Use an analog audio cable to connect the ZONE 3 PRE/LINE OUT jack on this unit to the input jack on an integrated amplifier in the separate room. The same source can be played back in the main room and ZONE 3 simultaneously. Also, different sources can be played back in both rooms.
Connections Connecting Antennas AM Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape.
Connections Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the ETHERNET jack with the Ethernet cable as shown in the illustration. To connect by Wi-Fi, select your desired setting method in "Network Connection" ( →p155) of Initial Setup, and then follow the on-screen instructions.
Connections Connecting External Control Devices IR IN/OUT port When connecting a remote control receiver unit consisting of an IR Receiver, etc. to this unit, operation using the remote controller is possible even if the remote control signal is difficult to reach (due to installation in the cabinet, etc.). It is also possible to operate this unit from other room such as ZONE 2 with a remote controller, or operate other devices with the remote controller by connecting other devices to this unit.
Connections 12V TRIGGER OUT jack When connecting a device equipped with a TRIGGER IN jack such as a BD/ DVD player to this unit, the device can be turned on or set to standby by interlocking the operation on this unit. When the desired input is selected on the unit, power link operation will be activated with a control signal of maximum 12 V/100 mA from the 12V TRIGGER OUT A jack or maximum 12 V/25 mA when using the 12V TRIGGER OUT B or C jack.
Connections Connecting the Power Cord Connect the power cord after all the connections are completed. • This model includes a removable power cord. Be sure to connect the power cord to the AC INLET of the unit first, and then connect it to the outlet. Always disconnect the outlet side first when disconnecting the power cord.
Playback Basic Operations Playing audio from an externally connected device 73 ® BLUETOOTH Playback 74 Listening To the Radio 77 Listening Mode 81 Quick Menu 83 Playback Network Services Spotify 86 AirPlay® 87 ® DTS Play-Fi 89 Amazon Alexa 90 92 Amazon Music TIDAL 94 Connecting the Sonos System for Playback 95 Internet Radio 97 Convenience functions Multi-zone 99 Playing different audio and video 104 Playing music files saved on a USB storage device 105 Music Server 107 Play Queue 110 Connecting a transmi
Playback Playing audio from an externally connected device You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI Main/Sub button or "Quick Menu" ( →p83) to switch between MAIN and SUB. Basic Operations TV’s REMOTE INPUT Inputs Inputs TV TV HDMI 1 1 HDMI HDMI 2 2 HDMI HDMI 3 3 HDMI TV Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit.
Playback BLUETOOTH® Playback You can wirelessly play music on a smartphone or other BLUETOOTH wireless technology enabled device through the speakers connected to this unit. It is also possible to transmit the audio from this unit to BLUETOOTH enabled headphones, wireless speakers, etc. Playing audio from BLUETOOTH wireless technology enabled devices with this unit Perform the following procedure when this unit is on. Pairing 1. When you press the Bluetooth button, "Now Pairing...
Playback Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices Pairing 1. Press the input selector you want to play. • Select a source other than "BLUETOOTH". This function does not work if you select "BLUETOOTH". 2. Press the button on the remote controller, select "6. Hardware" "Bluetooth" - "Bluetooth Transmitter", and press the Enter button. 3. Select either "On (Tx)" or "On (Main + Tx)" in "Bluetooth Transmitter".
Playback Playing Back 1. Do the play operations on the AV component connected to this unit. Do the play operations on this unit when the input is TUNER or NET. • If "Variable" has been selected for the "Output Level", the volume can be adjusted on this unit. Adjust to a suitable volume on the connected BLUETOOTH wireless technology enabled device beforehand. If "Fixed" is selected, adjust the volume on the BLUETOOTH wireless technology enabled device.
Playback Listening To the Radio You can receive AM/FM radio stations on this unit with the built-in tuner. Listening To the AM/FM Radio Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1. Press Tuner repeatedly to select either "AM" or "FM". 2. Press Mode repeatedly to display "TunMode: Auto" on the display. 3. When you press the cursors / , automatic tuning starts, and searching stops when a station is found.
Playback Tuning Manually Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception. 1. Press Tuner repeatedly to select either "AM" or "FM". 2. Press Mode repeatedly to display "TunMode: Manual" on the display. 3. While pressing the cursors / , select the desired radio station. • Each time you press the cursors / , the frequency changes by 1 step.
Playback • Unusual characters may be displayed when the unit receives unsupported characters. This is not a malfunction. Also, if the signal from a station is weak, information may not be displayed.
Playback Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite radio stations. After tuning in to the radio station you want to register, perform the following procedure. 1. Press Memory so that the preset number on the display blinks. 2. While the preset number is blinking (approx. 8 seconds), repeatedly press the cursors / to select a number between 1 and 40. 3. Press Memory again to register the station.
Playback Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by pressing Movie/TV, Music, and Game. ( →p181) • For details of the effects of each listening mode, refer to "Listening Mode Effects" ( →p187). • For listening modes selectable for each audio format of input signals, refer to "Input Formats and Selectable Listening Modes" ( →p183). Selecting a Listening mode 1.
Playback Checking the input format and listening mode Repeatedly pressing the button on the remote controller switches the display of the main unit in the following order. • The content displayed depends on the source, BLUETOOTH, etc., being played. • Not all the information is necessarily displayed. Input source and volume Listening mode Input format The display is switched in a few seconds.
Playback Quick Menu Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu. Quick Menu BD/DVD HDMI HDMI Out Audio A/V Sync Room EQ Audio Return Channel Level Select the item with the cursors / of the remote controller, and press the Enter button to confirm your selection. Use the cursors to change the settings.
Playback HDMI HDMI Out: Select the HDMI OUT jack to output video signals from "MAIN", "SUB", and "MAIN+SUB". Stereo Assign: This function enables you to select a pair of speakers to output stereo sound. Apart from the front speakers (Front), you can select the Surround speakers (Surround), Surround Back speakers (Surround Back), Height 1 speakers (Height 1) and Height 2 speakers (Height 2). A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap.
Playback Room EQ Level Dirac Live (*1): You can select the equalizers measured with Dirac Live ( →p157, p161) from "Slot1" to "Slot3". When disabling the equalizer, select "Off". • The Dirac Live measurement results are saved in "Slot1" to "Slot3", but you are able to register your own original sound quality with "Manual Adjust" ( →p162). • This cannot be selected when measurements are made using "AccuEQ Room Calibration".
Playback Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
Playback AirPlay® By connecting this unit to the same network as that of iOS devices such as iPhone ®, iPod touch® and iPad®, you can enjoy music files on iOS devices wirelessly. • Update the OS version on your iOS device to the latest version. • Depending on the iOS version, operation screens or operation procedures on the iOS device may be different. For details, refer to the operating instructions for the iOS device. Basic Operations 1.
Playing Back on multiple devices (AirPlay2) Playback This unit supports AirPlay2. If the version of the iOS device is iOS11.4 or later, you can play the tracks on the iOS device simultaneously on this device and on another device that supports AirPlay2. 1. Connect the iOS device to the access point where this unit is connected via network. 2.
Playback DTS Play-Fi® https://play-fi.com/ When connecting this unit to the same network as mobile devices, such as a smartphone and tablet, you can enjoy music played on the mobile device wirelessly. Music from a streaming distribution service or music in the music library on a mobile device can be played. This function also supports a playlist on iTunes.
Playback Amazon Alexa Alexa is a cloud-based voice service developed by Amazon. When this unit is registered with an Amazon account, you can use a terminal with Amazon Alexa (an Amazon Echo, etc.) or Amazon Alexa App (available on iOS and Android™) to perform operations such as adjusting the volume of this unit or playing music using voice commands. • You need an Amazon account to use Amazon Alexa. For more information, see the Amazon website. Registering this unit with an Amazon account 1.
(*1) Log in using the same account as other terminals with Amazon Alexa. 7. When registration is finished, the screen returns to the one for Integra Control Pro. Follow the on screen instructions and talk to the terminal with Amazon Alexa (an Amazon Echo, etc.), and confirm that you can use voice commands. For example: "Alexa, raise the volume of the speaker (*2)" "Alexa, play music from the speaker (*2)" (*2) Use the device name you registered in Step 4 when talking.
Playback Amazon Music Registering This Unit with Amazon Music Registering this unit with Amazon Music allows you to enjoy the music distribution service provided by Amazon. • To play Amazon Music, you need to have your Amazon account and sign up for Amazon Prime or Amazon Music Unlimited. For more information, see the Amazon website. Amazon Music is now available in several countries. If Amazon Music is not available in your country, please visit https://music.amazon.com/ for more info. 1.
Playing Amazon Music using the Integra Control Pro Playback 1. Start up Integra Control Pro. This unit is automatically displayed after startup. Then, tap and select this unit displayed. 2. Tap "NET" or "NETWORK" on the upper part of the screen to switch to the network screen. Then tap the "Amazon Music" icon. 3. Select the content to play from the menu screen of Amazon Music to start playback. Playing Amazon Music using the remote controller 1. 2. 3. 4.
Playback TIDAL • If the login screen is not displayed but an update or installation screen is displayed instead, perform the update or installation according to the onscreen instructions. Registering this unit with TIDAL allows you to enjoy the music distribution service provided by TIDAL. You can register this unit on the screen of Integra Control Pro by downloading Integra Control Pro (available on iOS or Android™) to mobile devices such as a smartphone and tablet.
Playback Connecting the Sonos System for Playback How to Connect This Unit and Sonos Connect Connecting this unit and Sonos Connect allows you to send the music or music sources on the Sonos App to this unit. Through Sonos Connect, you can play this unit with the same group of another Sonos device on the network or can play only on this unit. Also, if you start to play music from Sonos App, this unit is automatically turned on and the link function to switch input works. • When "6.
Playback cannot find the Sonos Connect to be interlocked, return to the previous screen, turn off the product you do not want to interlock, and try again. Output Zone: With the cursors / , select the ZONE where you want to listen to the music. "Main": Outputs audio only to the main room (where this unit is located). "Zone 2": Outputs audio only to the separate room (ZONE 2). "Main/Zone 2": Outputs audio to both the main room and separate room (ZONE 2).
Playback Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services such as TuneIn Radio. • To play Internet radio services, the network needs to be connected to the Internet. • Depending on the Internet radio service, a user registration may be required on your PC beforehand. For details of each service, visit the website of each service.
Playback Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing Enter will display the menu on the screen. When multiple icons are displayed, select the icon with the cursor, and press Enter.
Playback Multi-zone You can enjoy 2 ch audio in the separate room (ZONE 2/ZONE 3) while performing playback in the main room (where this unit is located). The same source can be played back in the main room and ZONE 2/ZONE 3 simultaneously. Also, different sources can be played back in both rooms. For the "NET" or "BLUETOOTH" input selector, you can select only the same source for the main room and separate room.
Playing Back (ZONE 2) 2 1 Playback In remote controller operation, while pressing and holding the Zone 2 Shift button, press other buttons for operation. 1. While pressing and holding the Zone 2 Shift button on the remote controller, point the remote controller at this unit and press . • "Z2" on the display of the main unit lights up. 2. While pressing and holding the Zone 2 Shift button on the remote controller, press the input selector of the input source you want to play in the separate room.
Playback • The audio from externally connected AV components can be output to ZONE 2 only when the audio is analog or 2 ch PCM signal. When the AV component is connected to this unit with an HDMI cable, digital coaxial cable or digital optical cable, change the audio output of the AV component to the PCM output. • When video and audio via HDMI input are output to ZONE 2, set "1. Input/ Output Assign" - "TV Out / OSD" - "Zone 2 HDMI" ( →p119) to "Use" on the Setup menu.
Playing Back (ZONE 3) 2 Playback In remote controller operation, while pressing and holding the Zone 3 Shift button, press other buttons for operation. Settings are required to playback a source in ZONE 3. When outputting from the speakers: Set "2. Speaker" - "Configuration" "Zone Speaker" ( →p124) in the Setup menu to "Zone 2/Zone 3". When outputting from the integrated amplifier: Set "2. Speaker" "Configuration" ( →p123) in the Setup, to one of the following. –– Set "Speaker Channels" to "2.1 ch", "3.
Playback • For ZONE 3 output, audio from externally connected AV components can be output only when it is an analog audio signal. • DSD audio signals cannot be output to ZONE 3 with the "NET" input selector. • If ZONE 3 is on, power consumption during standby will increase. • This function turns off if you use "Transmitting audio from this unit to BLUETOOTH wireless technology enabled devices" ( →p75).
Playback Playing different audio and video Displaying Your Favorite Video on TV While Playing Music While listening to the music from a CD or BLUETOOTH enabled device, you can display video on TV from an AV component such as a Blu-ray Disc player. • For audio playback, you can select an input selector to which video input is not assigned, such as "CD", "PHONO", "TUNER", "NET" and "BLUETOOTH". • When "OSD Language" ( →p119) is set to Chinese, the audio from "NET" and "BLUETOOTH" cannot be played.
Playback Playing music files saved on a USB storage device You can play music files stored on a USB storage device. Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Plug your USB storage device with the music files into the USB port on the rear panel of this unit. 3. Press NET to display the network service list screen. 4. Select "USB" with the cursors, and then press Enter.
etc. may occur. • When playing files recorded with VBR (Variable bit-rate), the playback time may not be displayed correctly. • This unit supports the gapless playback of the USB storage device in the following conditions. When continuously playing WAV, FLAC and Apple Lossless files with the same format, sampling frequency, the number of channels and quantization bit rate.
Playback Music Server Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers this unit is compatible with are those PCs with players installed that have the server functionality of Windows Media ® Player 12, or NAS that are compatible with home network functionality. When using Windows Media ® Player 12, you need to make the settings beforehand.
Playback Playing Back TV’s REMOTE INPUT Inputs TV HDMI 1 HDMI 2 HDMI 3 Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. 2. Start the server (Windows Media® Player 12 or NAS device) containing the music files to play. 3. Make sure that the PC or NAS is properly connected to the same network as this unit. 4. Press NET to display the network service list screen.
Playback 6. Select the target server with the cursors, and press Enter to display the items list screen. • This unit cannot access pictures and videos stored on servers. • Depending on the server sharing settings, contents stored on the server may not be displayed. 7. With the cursors, select the music file to play, and then press Enter to start playback. • If "No Item." is displayed on the screen, check whether the network is properly connected. • To return to the previous screen, press .
Playback Play Queue 2. Tapping the "+" icon of the track you want to add will open the pop-up to add the Play Queue information. When downloading Integra Control Pro (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can save your favorite playlist (Play Queue information) among music files stored in the USB storage device connected to this unit and music files stored in PC or NAS connected to the same network as this unit, and you can play the music on the playlist.
Playback 2. Tap the " " icon of the track to sort, and drag the icon to the destination. 3. To delete a track, slide the track to the left until the trash icon changes to " ". If " icon to the left. Releasing your finger will the device is on iOS, slide the " delete the track from Play Queue. Playing Back Playback starts when you select "Play Now " for Play Queue addition, or select the track in the Play Queue service screen.
Playback Connecting a transmitter for playback When you connect wireless headphones or a wireless speaker transmitter to the ZONE B LINE OUT jacks of this unit, you can play back the same source through the wireless headphones or wireless speakers as in the main room. Connections Setting Up 1. Use an analog audio cable to connect the ZONE B LINE OUT jacks on this unit to the input terminal on the transmitter. 1. Press on the remote controller, and set "2.
Playback • If "On (A+B)" is selected as an audio output destination, you can select only the "Stereo" listening mode for ZONE A when using the 2.1 ch speaker layout. When using a speaker layout of 3.1 ch or more, you can select only the "AllCh Stereo" listening mode.
Setup Setup Menu Web Setup Initial Setup with Auto Start-up Wizard Integra Control Pro Dirac Live 115 153 154 160 161 Setup 114
Setup Setup Menu Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Select the item with the cursors / of the remote controller, and press the Enter button to confirm your selection. Use the cursors / to change the default values. • To return to the previous screen, press . • To exit the settings, press the button. Setup 1. Input/Output Assign 1. TV Out / OSD 2. Speaker 2. HDMI Input 3. Audio Adjust 3. Video Input 4.
Setup 4. Source 1. My Input Volume 2. Name Edit Audio Select Video Select Set a volume value for each input selector. Set an easy name for each input. Select the prioritized input terminal when multiple audio sources are connected to one input selector. When "TUNER", "NET", or "BLUETOOTH" input is selected, you can set the input from which video is displayed on the TV. p133 p133 p133 p134 5. Listening Mode Preset 1. BD/DVD 2. GAME 3. CBL/SAT 4. STRM BOX 5. PC 6. AUX 7. CD 8. TV 9. PHONO 10. TUNER 11.
Setup 8. Miscellaneous 1. Tuner 2. Remote ID 3. Firmware Update 4. Initial Setup 5. Lock 6. Factory Reset Change the settings for Tuner. Change the remote controller ID. Change the settings for Firmware Update. Make the initial setup from the setup menu. Lock the Setup menu so that the settings cannot be changed. All the settings are restored to factory defaults.
Setup 1. Input/Output Assign 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV. HDMI Out (Default Value: MAIN) Select the HDMI jack to be connected with the TV. • If devices with different resolutions are connected to HDMI OUT MAIN jack and SUB jack, images are output with the lower resolution.
Setup 1. Input/Output Assign HDMI 4K/8K Signal Format Set the 4K/8K signal format input and output by this unit. Set to suit the TV or player connected. • The corresponding resolution is different depending on the HDMI jack connected. See "Corresponding input resolutions" ( →p199) for details.
Setup 1. Input/Output Assign Mini Player OSD (Default Value: Always On) You can display on the TV the images from another input selected last while playing the audio from NET or BLUETOOTH input. After switching the input to NET or BLUETOOTH, play the images and audio. And then when you press Mode on the remote controller, the image is displayed in full-screen mode, and the audio information (Mini Player) for NET or BLUETOOTH is displayed in the corner of the screen.
Setup 1. Input/Output Assign 3. Video Input 4. Digital Audio Input Change input assignment between the input selectors and COMPONENT VIDEO IN jacks and the VIDEO IN jacks. If you do not assign a jack, select "---". Change input assignment between the input selectors and DIGITAL IN COAXIAL/OPTICAL jacks. If you do not assign a jack, select "---".
1. Input/Output Assign Setup 5. Analog Audio Input Change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "---". BD/DVD GAME CBL/SAT STRM BOX PC CD TV PHONO AUDIO 1, AUDIO 2, AUDIO 3, AUDIO 4, AUDIO 5, AUDIO 6 (Default Value: AUDIO 1) (Default Value: AUDIO 2) (Default Value: AUDIO 3) (Default Value: AUDIO 4) (Default Value: ---) (Default Value: AUDIO 5) (Default Value: AUDIO 6) (Default Value: PHONO) The setting cannot be changed.
Setup 2. Speaker 1. Configuration Change the settings of connection environment of the speakers. • If the settings for "Speaker Channels", "Subwoofer", "Height 1 Speaker", or "Height 2 Speaker" have been changed, the Dirac Live ( →p157, p161) measurement results are deleted. Speaker Channels (Default Value: 7.1.2 ch) Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", "5.1.2 ch", "6.1.2 ch", "7.1.2 ch", "4.1.4 ch", "5.1.4 ch", "6.1.4 ch" or "7.1.
Setup 2. Speaker Height 2 Speaker (Default Value: Rear High) Set the speaker type if height speakers are connected to the HEIGHT 2 terminals. Select "Front High", "Top Front", "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", "Dolby Speaker (Surr)" or "Dolby Speaker (Back)" according to the type and layout of the connected speakers. However, the options selectable for the "Height 1 Speaker" are as follows.
Setup 2. Speaker 2. Crossover Change the settings of crossover frequencies. Front Center Height 1 Height 2 Surround Surround Back LPF of LFE Double Bass (Default Value: 80 Hz (THX)) (Default Value: 80 Hz (THX)) (Default Value: 80 Hz (THX)) (Default Value: 80 Hz (THX)) (Default Value: 80 Hz (THX)) (Default Value: 80 Hz (THX)) (Default Value: 120 Hz) (Default Value: On) • As for the THX-certified speakers, the following settings are recommended.
Setup 2. Speaker 3. Distance 4. Level Calibration Set the distance from each speaker to the listening position. Front Left Center Front Right Height 1 Left Height 1 Right Height 2 Left Height 2 Right Surround Right Surr Back Right Surr Back Left Surround Left Subwoofer (Default Value: 12.0 ft/3.60 m) (Default Value: 12.0 ft/3.60 m) (Default Value: 12.0 ft/3.60 m) (Default Value: 9.0 ft/2.70 m) (Default Value: 9.0 ft/2.70 m) (Default Value: 9.0 ft/2.70 m) (Default Value: 9.0 ft/2.
Setup 2. Speaker 5. Dolby Enabled Speaker 6. Equalizer Settings Change the settings of Dolby Enabled Speakers. • This setting can be selected when "Configuration" - "Height 1 Speaker" / "Height 2 Speaker" is set to "Dolby Speaker". You can adjust the output volume of the range for each connected speaker. Adjust the volume of different sound ranges for each speaker. You can set three different equalizers in Preset 1 to 3.
Setup 2. Speaker 7. THX Audio Change the THX Audio settings. Back Speaker Spacing (Default Value: >4.0 ft/>1.2 m) Select the distance between the surround back speakers from "<1.0 ft/<0.3 m", "1.0 - 4.0 ft/0.3 - 1.2 m", and ">4.0 ft/>1.2 m". • The unit of distance (ft/m) is displayed using the unit selected for the "Distance" setting. • The setting cannot be changed if "Configuration" - "Zone Speaker" is set to a selection item other than "No" and Zone 2 is on.
2. Speaker Setup 8. Speaker Virtualizer The Speaker Virtualizer function can be switched between On and Off. Speaker Virtualizer (Default Value: On) On Off Listening modes such as T-D that have virtual speaker effects can be selected. Listening modes such as T-D that have virtual speaker effects cannot be selected.
Setup 3. Audio Adjust 1. Multiplex/Mono 2. Dolby Change the settings of multiplex audio playback. Change the setting of when Dolby signals are input. Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. button on the remote • For multiplex audio broadcasts, pressing the controller will display "1+1" on the main unit’s display.
Setup 3. Audio Adjust 3. DTS/IMAX Change the setting of when DTS signals are input. DTS Auto Surround (Default Value: On) When inputting DTS signals that include extended channel information, the optimum listening mode is automatically selected according to the extended information contained in the input signal and the speaker configuration of this unit when playing in the straight decoding listening mode.
Setup 3. Audio Adjust 4. LFE Level Set the low-frequency effect (LFE) level for Dolby Digital series, DTS series, Multichannel PCM, and DSD signals. LFE Level (Default Value: 0 dB) Select the low-frequency effect (LFE) level of each signal from "0 dB" to "-∞ dB". If the low-frequency effect sound is too strong, select "-20 dB" or "-∞ dB". 5. Volume Power On Volume (Default Value: Last) Set the volume level of when the power is turned on.
Setup 4. Source 1. My Input Volume Audio Select Set a volume value for each input selector. Select the priority for input selection when multiple audio sources are connected to one input selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each input selector button. Select the input selector to configure. Note that there are some default values you cannot change.
Setup 4. Source Analog When giving priority to the input signal from AUDIO IN jacks • This item can be selected only when the input to be set is assigned to the AUDIO IN jack in the "1. Input/Output Assign" - "Analog Audio Input" setting. PCM Fixed Mode (Default Value: Off) Select whether to fix input signals to PCM (except multi-channel PCM) when you select "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting.
5. Listening Mode Preset Setup You can preset your favorite listening mode to each input. (For example, you can always apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged sound field.) When the list of input sources is displayed, set the signal type and listening mode. Although it is possible to select the listening mode during playback, the selected mode will be reset when the unit enters standby mode.
Setup 6. Hardware 1. HDMI HDMI Standby Through (Default Value: Auto (Eco)) Change the settings of the HDMI function. HDMI CEC (Default Value: On) Setting this to "On" enables the input selection link and other link functions with HDMI-connected CEC-compatible device. When this setting is changed, turn off and then on again the power of all connected devices. • Depending on the TV to use, a link setting may be required on the TV.
Setup 6. Hardware Audio TV Out (Default Value: Auto) You can enjoy audio through the speakers of the TV while this unit is on. • This setting is fixed to "Auto" if you set "1. Input/Output Assign" - "TV Out/ OSD" - "HDMI Out" or "HDMI" - "HDMI Out" in the "Quick Menu" to "MAIN" or "MAIN+SUB" and set "HDMI CEC" to "On". If you change this setting, set "HDMI CEC" to "Off". • Listening mode cannot be changed while "Audio TV Out" is set to "On" and audio is being output from the TV.
Setup 6. Hardware 2. Network Change the settings of the Network function. • When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each components, you must set "DHCP" to "Disable", assign an address to this unit in the "IP Address" setting, and set information related to your LAN, such as Subnet Mask and Gateway.
6. Hardware Friendly Name (Default Value: Integra DRX-5.4 XXXXXX) Change the model name of this unit which is displayed on the device connected to the network to an easily recognized name. 1. P ress Enter to display the Edit screen. 2. S elect a character or symbol with the cursors, and press Enter. Repeat this operation to input up to 31 characters. "A/a": Switches between upper and lower cases.
Setup 6. Hardware AirPlay Password (Default Value: -) You can set a password of up to 31 characters so that only users that have input can use AirPlay. 1. P ress Enter to display the Edit screen. 2. S elect a character or symbol with the cursors, and press Enter. Repeat this operation to input up to 31 characters. "A/a": Switches between upper and lower cases. (Pressing Mode on the remote controller also toggles between upper and lower cases) "←" "→": Moves the cursor in the arrow direction.
Setup 6. Hardware 3. Bluetooth Change the settings for the BLUETOOTH function. • Wait for a while if "Bluetooth" cannot be selected. It can be selected when the BLUETOOTH function is activated. (Bluetooth Receiver) Bluetooth Receiver (Default Value: On) Select whether or not to use the function that receives audio from BLUETOOTH wireless technology enabled devices.
Setup 6. Hardware (Bluetooth Transmitter) Bluetooth Transmitter (Default Value: Off) Select whether or not to use the function that transmits audio from this unit to BLUETOOTH wireless technology enabled devices.
Setup 6. Hardware 4. Power Management Change the settings for the power-save function. Sleep Timer (Default Value: Off) 30 minutes, 60 minutes, 90 minutes You can allow the unit to enter standby automatically when the specified time has elapsed. Select a value from "30 minutes", "60 minutes" and "90 minutes". Off Does not turn the unit to standby automatically.
Setup 6. Hardware Bluetooth Wakeup (Default Value: Off) This function wakes up the unit on standby by connecting a BLUETOOTH enabled device. This is effective when "Bluetooth" - "Bluetooth Receiver" is set to "On". On Off When this function is used • When this function is set to "On", the power consumption in standby state increases, however, the increase in power consumption is minimized by automatically entering the Hybrid Standby mode where only the essential circuits operate.
Setup 6.
Setup 6.
Setup 6.
6. Hardware Setup Output Zone (Default Value: Main) Select the zone where you want to listen to the music. • To use this function, set "Input Selector" beforehand. Main Zone 2 Main/Zone 2 Zone 3 Outputs audio only to the main room (where this unit is located). Outputs audio only to the separate room (ZONE 2). Outputs audio to both the main room and separate room (ZONE 2). Outputs audio only to the separate room (ZONE 3). Main/Zone 3 Outputs audio to both the main room and separate room (ZONE 3).
Setup 7. Multi Zone 1. Zone 2 2. Zone 3 Change the settings for Zone 2. Change the settings for Zone 3. Select whether to adjust the volume on the integrated amplifier in the separate room or on this unit when outputting to the separate room (Zone 2). Select whether to adjust the volume on the integrated amplifier in the separate room or on this unit when outputting to the separate room (Zone 3).
7. Multi Zone Setup 3. Remote Play Zone Change the settings for remote play. Remote Play Zone (Default Value: Auto) When playing with AirPlay or Spotify Connect, or when using the Music Server function to play remotely from your PC, you can set whether to play in the main room (where this unit is located) or in a separate room (ZONE 2/ZONE 3). Auto Main, Zone 2, Zone 3 When the main room input is NET, music is played in the main room.
Setup 8. Miscellaneous 1. Tuner 3. Firmware Update Change the settings for Tuner. Change the settings for Firmware Update. AM/FM Frequency Step (North American models) (Default Value: 10 kHz / 0.2 MHz) Select a frequency step to suit your residential area. Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz". • When this setting is changed, all radio presets are deleted. AM Frequency Step (Australian models) (Default Value: 9 kHz) Select a frequency step to suit your residential area.
8. Miscellaneous Setup 4. Initial Setup Make the initial setup from the setup menu. • Wait for a while if "Initial Setup" cannot be selected. It can be selected when the network function is activated. 5. Lock Lock the Setup menu so that the settings cannot be changed. Setup Parameter (Default Value: Unlocked) Lock the Setup menu so that the settings cannot be changed. Locked The menu is locked. Unlocked The menu is unlocked. 6.
Setup Web Setup Menu operations You can make the settings for the network function of this unit using an Internet browser on a PC, smartphone, etc. on the remote controller to display the Setup menu. 1. Press 2. Select "6. Hardware" - "Network" with the cursors, and then take a note of the IP address displayed in "IP Address". 3. Start the Internet browser on your PC, smartphone, etc. and enter the IP address of this unit in the URL field. 4. The screen for entering the user name and password is displayed.
Setup Initial Setup with Auto Start-up Wizard Operations TV’s REMOTE INPUT Inputs TV HDMI 1 HDMI 2 HDMI 3 TV When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for startup using simple operations following on-screen guidance. 1. Switch the input of the TV to the input connected to the unit. 2. Put batteries into the remote controller of this unit. 3.
Setup Network Connection Keyboard Input 1. A confirmation screen asking you whether to agree to the privacy statement is displayed during network setting. If you agree, select "Accept" and press Enter. 2. Select the type of connection to the network. To use the Chromecast built-in function to connect, select "Yes" and press Enter. The Google Home app is required to use the Chromecast built-in function. Download the Google Home app from Google Play or the App Store to your smart phone or tablet.
Setup 3. Select "Next" and press Enter. Then a test tone is output from each speaker to confirm the connection. Selecting each speaker with the cursors / will output the test tone. Press Enter after confirmation. 4. If there is no problem with the speaker connection, select "Next" and press Enter. To return to "Speaker Setup", select "Back to Speaker Setup" and press Enter. 2. Multi Zone Sound Check Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in addition to the main room. 3.
Setup Measuring with Dirac Live Use the Integra Control Pro to use Dirac Live to take measurements. Use the most recent version. Note that you cannot make settings using operations on this unit. Refer to "Integra Control Pro" ( →p160) for information about the app. Also have a tripod ready to set up the speaker setup microphone. • Calibration takes about 20 minutes to be completed. Dirac Live® is an advanced room correction technology developed by Dirac Research.
Setup 6. The guidance about outputting the test tone is displayed. Refer to the illustration to set up the speaker setup microphone in the listening position. Follow the on-screen instructions to measure. • Measurement may not be possible if the test tone is too loud or too soft. Tap "Level Adjust" to adjust the volume of the test tone. 7. When measurement is complete, "Calculating results" is displayed on the screen. Tap "Transfer to your product" to transfer the measurement data to the unit. 8.
Setup Measuring with AccuEQ Room Calibration Place the supplied speaker setup microphone at the listening position. The unit automatically measures the test tones output from each speaker, and sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position.
Setup Integra Control Pro Initial Setup Integra Control Pro (available on iOS and Android™ handsets) is a dedicated app available for free which allows you to use your handset as a remote controller. Along with basic operations such as switching input and adjusting the volume, you can also select a radio station or network service (internet radio or play of a music file) without looking at the TV. • To use Integra Control Pro, this unit needs to be connected to the same network as the mobile device. 1.
Setup Dirac Live Measuring with Dirac Live Use the Integra Control Pro to use Dirac Live to take measurements. Use the most recent version. Note that you cannot make settings using operations on this unit. Refer to "Integra Control Pro" ( →p160) for information about the app. Also have a tripod ready to set up the speaker setup microphone. • Calibration takes about 20 minutes to be completed. Dirac Live® is an advanced room correction technology developed by Dirac Research.
6. The guidance about outputting the test tone is displayed. Refer to the illustration to set up the speaker setup microphone in the listening position. Follow the on-screen instructions to measure. • Measurement may not be possible if the test tone is too loud or too soft. Tap "Level Adjust" to adjust the volume of the test tone. 7. When measurement is complete, "Calculating results" is displayed on the screen. Tap "Transfer to your product" to transfer the measurement data to the unit.
Setup 1 4 2 5 3 6 1 The speaker currently being adjusted. To adjust another speaker, tap the " " next to it and select another speaker. 2 Displays the Menu screen. From the menu, you perform actions such as reset the speaker adjustments and cancel and exit the adjustments. You can also copy data from other slots. 3 Drag the points on the equalizer curve side to side to change the frequency and up or down to change the boost. • You can add a point by tapping on the curve where there isn't a point.
Troubleshooting Troubleshooting Before starting the procedure When the unit is operating erratically Try restarting the unit Resetting the unit (this resets the unit settings to the default) Troubleshooting Power Audio Listening Modes Video Linked operation Tuner BLUETOOTH function Network function USB storage device Wireless LAN Network ZONE B function Multi-zone function Remote Controller Display Others 165 166 166 166 167 167 167 169 170 171 171 171 173 174 174 175 175 17
Before starting the procedure Troubleshooting Problems may be solved by simply turning the power on/off or disconnecting/ connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device. If the problem is that the video or audio is not output or the HDMI linked operation does not work, disconnecting/connecting the HDMI cable may solve it.
Troubleshooting When the unit is operating erratically Try restarting the unit Restarting this unit may solve the problem. Set the main unit to standby, then after waiting for 5 seconds or more, press and hold the On/Standby button of the main unit for at least 5 seconds, and then restart the unit. (The settings on this unit are kept.) If the problem persists after restarting the unit, unplug and plug the power cords or HDMI cable of this unit and connected devices.
Troubleshooting Troubleshooting Power When the power is turned on, "AMP Diag Mode" appears on the display of the main unit • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
Troubleshooting No sound from the TV • Change the input selector on this unit to the position of the terminal to which the TV is connected. • If the TV doesn't support the ARC function, along with connection by HDMI, connect the TV and this unit using a digital optical cable or analog audio cable. ( →p58) No sound from a connected player • Change the input selector on this unit to the position of the jack to which the player is connected.
Troubleshooting Noise can be heard • Using cable ties to bundle analog audio cables, power cords, speaker cables, etc. may degrade the audio performance. Do not bundle the cords. • An audio cable may be picking up interference. Change the position of the cables. The beginning of audio received by an HDMI IN cannot be heard • Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, audio output may not start immediately.
Troubleshooting About DTS signals • With media that switches suddenly from DTS to PCM, PCM playback may not start immediately. In such a case, stop playback on the player side for approx. 3 seconds or more. Then, resume playback. The playback will be performed normally. • DTS playback may not be performed normally on some CD and LD players even if the player and this unit are digitally connected. If some processing (e.g.
Troubleshooting Video and audio are out of synch • Depending on the settings on your TV and connection environment, the video may be behind the audio. Press Q on the remote controller to display "Quick Menu", select "HDMI" - "A/V Sync", and make the adjustment. ( →p84) Linked operation HDMI linked operation does not work with CEC-compliant devices, such as a TV • In the Setup menu of the unit, set "6. Hardware" - "HDMI" - "HDMI CEC" to "On".
Troubleshooting Cannot connect a BLUETOOTH wireless technology enabled device (PC, smartphone, etc.) to this unit • Initialize the pairing information and perform pairing again. Firstly delete all the pairing information saved on this unit. In the Setup menu, select "6. Hardware" - "Bluetooth" - "Bluetooth Receiver" - "Pairing Information", then press Enter while "Clear" is displayed. Next, delete the pairing information of this unit that is saved on the BLUETOOTH wireless technology enabled device.
Troubleshooting The audio quality is poor after connection with a BLUETOOTH enabled device • The BLUETOOTH reception is poor. Move the BLUETOOTH enabled device closer to the unit, or remove any obstacle between the BLUETOOTH enabled device and this unit. Network function • • • • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. When the NET indicator is blinking, this unit is not properly connected to the home network.
Troubleshooting USB storage device USB storage device is not displayed • • • • • Check if the USB storage device or USB cable is securely inserted to the USB port of the unit. Disconnect the USB storage device once from the unit, and then reconnect it. Performance of the hard disk that receive power from the USB port of the unit is not guaranteed. Depending on the type of content, the playback may not be performed normally. Check the types of supported file formats.
Troubleshooting ZONE B function Cannot output audio to ZONE B • To output audio to ZONE B, set the audio output destination for "Audio" - "Zone B" on Quick menu to "On (A+B)" or "On (B)" and also set "2. Speaker" - "Configuration" - "Zone 2 Preout" on the Setup menu to "Zone B". ( →p112) Multi-zone function Cannot ZONE-output the audio of externally connected AV components • To output audio from an externally connected AV component to ZONE 2, connect it to any of HDMI IN1 to IN3 jacks.
Troubleshooting The message "Noise Error" appears during AccuEQ Room Calibration • This can be caused by a malfunction in your speaker unit. Check the speaker output, etc. The measurement results of AccuEQ Room Calibration show different distances to the speakers from the actual ones • Depending on the speakers you are using, some errors may occur in the measurement results. If this is the case, make the settings in "2. Speaker" - "Distance" in the Setup menu.
Appendix Appendix Speaker Layouts and Selectable Listening Modes Listening Mode buttons and Selectable Listening Modes Input Formats and Selectable Listening Modes Listening Mode Effects Speaker Combinations General Specifications 178 181 183 187 194 196 177
Appendix Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Listening mode Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 7.1 DD (Dolby Audio - DD) (*1) (*1) (*1) (*2) (*2) DD+ (Dolby Audio - DD+) (*1) (*1) (*1) (*1) (*2) (*1) (*2) DTHD (Dolby Audio - TrueHD) (*1) (*1) (*1) (*1) (*2) (*1) (*2) 2.1.2 3.1.2 4.1.2 5.1.2 6.1.2 7.1.2 (*2) (*3) 4.1.4 5.1.4 6.1.4 7.1.
Appendix Listening mode Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 7.1 2.1.2 3.1.2 4.1.2 5.1.2 6.1.2 7.1.2 4.1.4 5.1.4 6.1.4 7.1.4 (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*3) (*4) (*3) (*3) (*3) (*3) (*4) 2.1.2 3.1.2 4.1.2 5.1.2 6.1.2 7.1.2 4.1.4 5.1.4 6.1.4 7.1.
Appendix Listening mode Speaker layout (ch) 2.1 3.1 4.1 5.1 6.1 7.1 3.1.2 4.1.2 5.1.2 6.1.2 7.1.2 4.1.4 5.1.4 6.1.4 7.1.4 Multich (Multichannel) (*1) (*1) (*1) (*1) (*1) 2.1.
Listening Mode buttons and Selectable Listening Modes Appendix Refer to the following table for the listening modes that can be selected with each listening mode button. Listening mode Listening Mode buttons Movie/TV Music Game Listening mode DD (Dolby Audio - DD) DTS DD+ (Dolby Audio - DD+) ES Discrete (DTS-ES Discrete) DTHD (Dolby Audio - TrueHD) ES Matrix (DTS-ES Matrix) Atmos DTS 96/24 Atmos 2.0/2.1 DTS-HD HR (DTS-HD High Resolution) Atmos 3.0/3.
Appendix Listening mode Listening Mode buttons Movie/TV Music Game THX Games THX Sel Games Orchestra Unplugged Studio-Mix TV Logic Unplugged Game-RPG Game-Action Game-Rock Game-Sports AllCh Stereo Mono Music T-D (Theater-Dimensional) 182
Appendix Input Formats and Selectable Listening Modes You can select a variety of listening modes according to the audio format of the signal to be input. • Selectable listening modes when headphones are connected are Mono, Direct, and Stereo only.
Appendix Listening mode DTS (*2) Input format DTS 96/24 (*2) DTS Express (*2) DTS-HD HR (DTS-HD High Resolution) (*2) DTS-HD Master (DTSHD Master Audio) (*2) ES Discrete ES Matrix (DTS-ES (DTS-ES DTS:X Discrete) Matrix) (*5) (*5) DTS Neural:X (*6) IMAX DTS (*10) IMAX IMAX Neural:X DTS:X (*10) (*10) 2-channel signal input Analog / PCM Music file / DSD (*1) DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTS-HD HR / DTS-HD MSTR Multi-channel signal input Multich PCM DSD (*1) DD DD+ DTHD ATMOS DTS D
Appendix Listening mode Input format PCM (Multich PCM) (*2) DSD (*2)(*12) Mono Orchestra/ Unplugged/ Studio-Mix/ TV Logic/ GameAction/ Game-Rock/GameRPG/ Game-Sports (*7) AllCh T-D (TheaterStereo / Dimensional) Mono Music (*9) (*8) THX Cinema/ Music/ Games (*11) THX Select Music/ Cinema/ Games (*5) 2-channel signal input Analog / PCM Music file / DSD (*1) DD / DD+ / DTHD DTS / DTS 96/24 / DTS Express / DTS-HD HR / DTS-HD MSTR Multi-channel signal input Multich PCM DSD (*1) DD DD+ DTHD ATMOS DTS DTS
Appendix (*1) (*2) (*3) (*4) (*5) (*6) Y ou cannot select any mode other than Stereo, AllCh Stereo and Mono Music if the sampling rate is 5.6/11.2 MHz. A center speaker or surround speakers need to be installed. If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected. This can only be selected when no surround back speaker is connected. urround back speakers need to be installed.
Appendix Listening Mode Effects In alphabetical order AllCh Stereo This mode is ideal for background music. Stereo sound is played through the surround speakers as well as the front speakers, creating a stereo image. Atmos and height speakers installed. • To enable transfer of this audio format, connect via an HDMI cable and set the audio output on the player to Bitstream output. • When "Speaker Virtualizer" ( →p129) is set to "Off" (Default: On), modes Atmos cannot be selected.
Appendix Direct This listening mode can be selected for all input signals. Processing that affects sound quality is shut down, and sound closer to the original is reproduced. The sound is reproduced with the sound field based on the number of channels in the input signal. For example, a 2 ch signal is output only from the front speakers. Note that the sound adjustment is not available when this mode is selected. • The speaker calibrations measured with Dirac Live are disabled.
Appendix DTS 96/24 DTS-HD MSTR (DTS-HD Master Audio) This mode faithfully reproduces the sound design recorded in the DTS 96/24 audio format. The DTS 96/24 format is an optional audio format for DVD-Video and Blu-ray Discs. It enables recording of 5.1 channels; two front channels, one center channel, two surround channels, and the LFE channel dedicated to the bass region (sound elements for the subwoofer).
Appendix ES Matrix (DTS-ES Matrix) IMAX This mode faithfully reproduces the sound design recorded in the DTS-ES Matrix audio format. DTS-ES Matrix is an optional audio format based on 5.1 ch for DVD-Video and Blu-ray Discs. A monaural surround back channel is inserted to this format by matrix encoding. During playback, 6.1 channel-playback is achieved by the matrix decoder on this unit.
Appendix format input which includes IMAX Enhanced content. • IMAX Mode is set to "Auto" at the time of purchase ( →p131). The listening mode automatically switches when IMAX Enhanced content is recognized, but when playing IMAX Enhanced content received through streaming services on a TV, etc., the IMAX Enhanced content may not be recognized and the listening mode may not switch. Set the IMAX Mode to "On" in this case. • When surround back speakers are connected and DTS audio format that includes 5.
Appendix THX THX is a series of specifications for the accurate reproduction of movies propounded by the film director George Lucas. THX listening modes include the THX Cinema mode, etc. Using technology such as THX Loudness Plus and Timbre Matching, the sound of a movie theater is reproduced accurately. • The speaker calibrations measured with Dirac Live are disabled.
Appendix –– THX Sel Gam (THX Select Games): Select the THX Select Games mode to play game sound recorded in a multichannel format. In this mode, the THX ASA processing technology enables the playback of game sound in a 360-degree sound field which was recorded in PCM, DTS, Dolby Digital and other 5.1 ch formats. –– THX Sel Mus (THX Select Music): Select THX Select Music to play music sources recorded in a multichannel format.
Appendix Speaker Combinations • Up to two powered subwoofers can be connected in either combination. Speaker Channels 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch (*1) 7.1 ch (*1) 2.1.2 ch (*2) 3.1.2 ch (*2) 4.1.2 ch (*2) 5.1.2 ch (*2) 6.1.2 ch (*1) 7.1.2 ch (*1) 4.1.4 ch (*1) 5.1.4 ch (*1) 6.1.4 ch (*1) 7.1.
Appendix –– Height 1 Speaker: Front High, Height 2 Speaker: One of Rear High/Top Middle/Top Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back) –– Height 1 Speaker: Top Front or Dolby Enabled Speaker (Front), Height 2 Speaker: One of Rear High/Top Rear/Dolby Enabled Speaker (Surround)/Dolby Enabled Speaker (Surround Back) When only 1 set of the height speakers is connected, 1 from the height speakers types can be selected.
Appendix General Specifications Amplifier Section North American models Australian models Rated Output Power With 8 ohm loads, both channels driven, from 20 Hz20 kHz; rated 120 watts per channel minimum RMS power, with no more than 0.08% total harmonic distortion from 250 milliwatts to rated output.
Appendix Video Section North American models Australian models 1 Vp-p/75 Ω (Composite Video) 1 Vp-p/75 Ω (Component Video Y) 0.7 Vp-p/75 Ω (Component Video Pb/Pr) Signal level Correspoinding maximum resolution Tuner Section FM Tuning Frequency Range 50 dB quieting sensitivity (FM MONO) AM Tuning Frequency Range 480i/576i (Component Video) North American models Australian models 87.5 MHz - 107.9 MHz 87.5 MHz - 108.0 MHz, RDS 1.0 μV, 11.
Appendix HDMI North American models Input Australian models 7 (Including 1× Front) Output 2 (MAIN, SUB/ZONE2) Input *1 HDMI Ver bandwidth ALLM VRR (for Game) QMS (for Movie) FVA (for Game) QFT (for Movie) DSC Uncompressed Compressed (TV needs DSC) ARC / eARC *2 HDR10 (HDR10, BT.2020, HLG) HDR10+ HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5 HDMI 6 2.1 40Gbps 2.1 40Gbps 2.1 40Gbps 2.1 24Gbps 2.1 24Gbps 2.
Appendix Corresponding Frame rate input resolutions 4K 24/25/30 Hz (3840x2160p) 4K SMPTE (4096x2160p) 48/50/60 Hz Color space YCbCr4:2:2 YCbCr4:4:4/RGB YCbCr4:2:0 YCbCr4:2:2 YCbCr4:4:4/RGB 100/120 Hz 5K (5120x2160p) 8K (7680x4320p) YCbCr4:2:0 YCbCr4:2:2 YCbCr4:4:4/RGB 24/25/30 Hz YCbCr4:2:2 YCbCr4:4:4/RGB 48/50/60 Hz YCbCr4:2:0 YCbCr4:2:2 YCbCr4:4:4/RGB 24/25/30 Hz YCbCr4:2:0 YCbCr4:2:2 YCbCr4:4:4/RGB 48/50/60 Hz YCbCr4:2:0 YCbCr4:2:2 YCbCr4:4:4/RGB Color depth 12 bit 8 bit 10/12 bit 8 bit 10
Appendix • Signals are output from the HDMI OUT jack of this unit to the TV with the same resolution as the input resolution. When a TV supporting 4K is used, HDMI video signals with 1080p can be output with 4K. For linked functions to work properly, do not connect CEC-compliant devices exceeding the connectable number to the HDMI jack as shown below.
Appendix USB Section USB ¢ USB Storage Device ( →p105) Supported Audio Formats North American models Australian models 1 (Rear : Ver.2.0, 5V/1 A) MP3 (.mp3) • MPEG-1/MPEG-2 Audio Layer-3/44.1 kHz, 48 kHz/Between 8 kbps and 320 kbps, and VBR WMA (.wma) • 44.1 kHz, 48 kHz/Between 5 kbps and 320 kbps, and VBR • WMA Pro/Voice/WMA Lossless formats are not supported. WAV (.wav) WAV files contain uncompressed PCM digital audio. • 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.
Appendix General North American models Australian models AC 120 V, 60 Hz AC 220 - 240 V, 50/60 Hz 850 W 870 W Full Standby mode 0.1 W 0.15 W Network Standby (wired) 1.7 W 1.8 W Network Standby (wireless) 1.7 W 1.8 W Bluetooth Wakeup 1.6 W 1.8 W HDMI CEC Standby 0.1 W 0.15 W Standby mode (ALL ON) 1.7 W 1.8 W 2.7 W 2.
Appendix Audio Inputs North American models Analog Australian models 7 (Including 1×PHONO) 2 (COAXIAL×1, OPTICAL×1) • Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz/16 bit, 20 bit, and 24 bit.
SN 29404030_EN ©2021 Onkyo Home Entertainment Corporation. All rights reserved. ©2021 Onkyo Home Entertainment Corporation, Tous droits de reproduction et de traduction réservés. https://www.onkyo.
Initial Setup Guide DRX-5.4 AV Receiver SN 29403892 02103-0 Illllll lllll lllll lllll lllll lllll 111111111111111111 * 2 9 4 0 3 8 9 2 * https://integraworldwide.com/manual/drx54/top.pdf This document uses a 7 .1 channel system as an example when describing use. Refer to the online instruction manual when using other than a 7 .1 channel system. There are also descriptions for using the multi-zone feature and other detailed operating instructions.
lntegra 1 STEP 7.1 ch System FL, FR C SL, SR SW SBL, SBR This icon means the important setting. Make sure to confirm the setting at "Initial Setup" (STEP 3). Front Speakers Center Speaker Surround Speakers Powered Subwoofer Surround Back Speakers a: 22' to 30', b: 90' to 110', c: 135' to 150' ~CINLET 8KI HOCP2.3 2tGAME) 3 { CBL/SA"T l 4 (STRMBOX ) 5 CPCI 6 ~ @@@. • GtD 1!1111 (i)(j)(j)(j)(j) PHONO '"'
2 STEP Non-ARC TV HDMIIN (ARC) HDMI IN DIGITAC OPTICAL OUT D Digital optical cable HDMI cable c:::::? s::::J ltfit•i Be sure to insert the HDMI cable all the way in. t ■■■■■■■■■■■■■■ 8KIHDCP2.3 ~ { STRMB~XI ~ {PC) J ~ ~,c'"m ~ J > ~ ZONE 2 R L AM ta :.
FM Ethernet cable HDMIIN 11B0/ DYD) 2tGAMEl R (80/0V0) Cl L (ii) f) ta FM OPTICAL (TV) c~.ENT~FR FRONT , ,IONT COMPONENT ~ 4 (STRM e, '2.3 5 tPC) ·~:liIJ ~"'""' ==~II __,.,_,, 1=----- ~ AM 3 (CBL/ $AT) ~-i 75~ ~ a.
STEP 3 Switch the input on the TV to that assigned to the unit. Inputs Il!. HDMl1 HDMI 2 HDMI 3 ~01/ ~ff:~o/ ~ c::::::2 ~ ' TV's REMOTE ----- -- @ ------0 I I ~ ~ O JI / ➔,,Q.~/ 1- ~ Initial Setup Initial Setup Select Language Network Connection Setup Mic Initial Setup En_111ish 1st Step : Speaker Setup Deutsch Franc;ais Espanol Italiano Nederlands Svenska 2nd Step : Multi Zone Sound Check This Unit's REMOTE 3rd Step : ARC Setup 4th Step : Dirac Live ~ - ~ ~ ....,.. 0 ~ 1 \
ldil·I Troubleshooting Try restarting the unit. Switch this unit to standby, then do 0. If the problem is not fixed, try the following: • Unplugging the power cord and HDMI cables then replugging them in again • Initializing the settings (do f.) while this unit is ON} • Updating the firmware 0 Restart/4~ = = = =1 8 Initialize ~2 - a re: ~ 1~~~ c?'\ ( '"Oo/Slaodby "--- ( Clear o\ '\ '-- t""\ ...
DR X-5.4 R 9.2-Channel Network A/V Receiver Welcome Extraordinary into Your Home Theater-reference Dolby Atmos® or DTS:X® sound through up to 7.2.4 channels* complements 8K HDR video passthrough. Connect 5.2.4-ch speakers and Zone 2 speakers and switch between 5.2.4-ch and 5.2.2-ch + Zone 2 playback, or use 5 GHz/2.4 GHz Wi-Fi® and your voice to control music all around your home. * Requires connection of an external stereo power amp. Audio & Video Highlights Audio-Video Connections • 5.2.4/7.2.
DR X-5.4 R 9.2-Channel Network A/V Receiver Specifications Amplifier Section Power Output Front L/R: Video Section Signal Level 250 W/Ch at 6 Ohms, 1 kHz, 10%, 1 Channel Driven, 120 W/Ch at 8 Ohms, 20 Hz–20 kHz, 0.08%, 2 Channels Driven, FTC 1 Vp-p / 75 Ohms Composite Video 1 Vp-p / 75 Ohms Component Video (Y) 0.7 Vp-p / 75 Ohms Component Video (Pb/Pr) Tuner Section Dynamic Power: 250 W (3 Ohms, Front) 220 W (4 Ohms, Front) 130 W (8 Ohms, Front) Tuning Frequency Range: FM 87.5 MHz–107.
Web Page Guide Guide Page Web / Guia de la pagina web / Guida pagina web / Webseiten-Anleitung / Webpaginagids / Webbsidesguide /~~!~iii/ Web -"'-~O).::,'~pq Voice Control Guide Works with Alexa URL https://integraworldwide.com/manual/playback/amazonalexa.pdf • I!] Works with Google Assistant URL . - https://integraworldwide.com/manual/playback/googleassistant.pdf ~v --- ~ ~ I 0 1Q c:::::=J ■ English You can use a terminal with Amazon Alexa (an Amazon Echo, etc.
Voice Control Guide ■ Italiano E possibile usare un terminale con Amazon Alexa (un Amazon Echo, ecc.) o un terminale con Google Assistant (Google Home, ecc.) per effettuare operazioni come regolare ii volume di questa unita o riprodurre musica usando comandi vocali. Vedere le sezioni URL per informazioni sulle impostazioni e le operazioni iniziali. ■ Deutsch Sie konnen ein Endgerat mit Amazon Alexa (Amazon Echo usw.) oder ein Endgerat mit Google Assistant (Google Home usw.
Chromecast built-in URL https://integraworldwide.com/manual/playback/chromecast.pdf ti . [!l • • -I .. ■ English You can enjoy music wirelessly with your smartphone or tablet PC connecting to the same network as this unit. To use the Chromecast built-in function, initial settings are required. Refer to the URL sections for information on initial settings and operations. ■ B*t! *~c: G;:i:. ·;; 1-- '7-? 1:::t£~ L,t.::A -:z- 1-- 7 v ·;; v ~ ;;t- ::,,~'.$7 :1 1--~tte-:> -C, ff~~ '7-1-V XZ'~ t..,t,•.
lntegra® AV Receiver ~ lrm~I Safety Information it:i:1;; }~~ © Copyright 2021 Onkyo Home Entertainment Corporation Japan. All rights reserved. © 2021 Onkyo Home Entertainment Corporation, Tous droits de reproduction et de traduction reserves. Onkyo group has established its Privacy Policy, avaiable at [https://www.onkyo.com/privacy/].
lntegra® The lntegra Division of Onkyo Home Entertainment Corporation 1-1-41 Kawamata, Higashiosaka-shi,Osaka 577-0063 Japan https://integraworldwide.com/ 11 Trading Company Tel: 800-225-1946, 201-818-9200 (For USA customers) https://www.integrahometheater.com/ Tel: 844-525-6053 (For Canadian customers) http://www.integrahometheater.ca/ Aqipa GmbH (EU importer) Moeslbichl 78, 6250 Kundl, Austria www.integra.eu Room 302-1, Suhehui, No.
The Safety of Your Ears is in Your Hands Get the most out of your equipment by playing it at a safe level - a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing "comfort level~ adapts to higher volumes of sound, so what sounds unormaln can actually be loud and harmful to your hearing.
~ !lilillJl 1 Jffir1:a$:i!im11.n,Ji!lOHi"±iffcJi!Ht, %1hl!Hi'e!!Hil I 8H'ii'iJlti!ima:tm:@§lil~ao :a$:i!im!.IW\a
(DRX-2.4, DRX-3.4, DRX-5.4) Hom.The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Important Notice Regarding Software The software package installed In this product includes software licensed to Onkyo Home Entertainment Corporation directly or indirectly by third party developers. Please be sure to read this notice regarding such software. '.
END OF TERMS AND CONDITIONS any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10.
that the hcense for the Executable Form does not attempt to hm1t 0< alter the recipients' rights in the Source Code Form under this License. 3.3. OlstributJon of a Larger Work You may create and distribute a Larger Work under terms of Your choice, provided that You also comply with the requirements of this License for the Covered Software.
libdrm ..tnaviv Copynght 1999 Precision Insight. Inc., Cedar Park, Texas Copynght 2000 VA Linux Systems, Inc., Sunnyvale, California All Rights Reserved. libdrm-freedreno Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. Copynght 2000 VA Linux Systems, Inc., Sunnyvale. Califomia. All Rights Reserved libdnn-ttms Copyright 1999 Precision Insight, Inc., Cedar Park, Texas Copyright 2000 VA Unux Systems, Inc., Sunnyvale, California All Rights Reserved libdrm.
lntegra Product Registration (USA and Canada) Thank you for purchasing this lntegra product. In order to protect your investment and to receive information on new products and updates, please register. Please visit our web site for your online registration at: http://www.integrahometheater.com/registration.php www.integrahometheater.com/ can assist you anytime with Frequently Asked Questions, Hookup Diagrams, and Service Information.
lntegra Limited Warranty (USA) PLEASE RETAIN YOUR ORIGINAL BILL OF SALE AS YOU WILL NEED TO PRESENT IT SHOULD YOU REQUIRE SERVICE UNDER THIS WARRANTY.
lntegra Limited Warranty (Canada) PLEASE RETAIN YOUR ORIGINAL BILL OF SALE AS YOU WILL NEED TO PRESENT IT SHOULD YOU REQUIRE SERVICE UNDER THIS WARRANTY.
