Owner's Manual
Table Of Contents
- What’s in the box
- Connections
- Playback
- AV Component Playback
- BLUETOOTH® Playback
- Internet Radio
- Spotify
- AirPlay®
- DTS Play-Fi®
- FlareConnectTM
- USB Storage Device
- Playing back files on a PC and NAS (Music Server)
- Play Queue
- Amazon Music
- Connecting the Sonos System for Playback
- Listening To the AM/FM Radio
- Multi-zone
- ZONE B Playback
- Convenience functions
- Listening Mode
- Inputting Characters
- Setup
- Troubleshooting
- Appendix
185
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
Update via
USB
- Press Enter to select when updating the rmware
via USB.
• This setting cannot be selected if a USB storage
device is not connected or there is no updatable
rmware in the USB storage device.
• Wait for a while if "Firmware Update" cannot be selected. It can be selected when the
network function is activated.
5. Initial Setup
Make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected. It can be selected when
the network function is activated.
6. Lock
Lock the Setup menu so that the settings cannot be changed.
Setting Item Default Value Setting Details
Setup Parameter Unlocked Lock the Setup menu so that the settings cannot be
changed.
"Locked": The menu is locked.
"Unlocked": The menu is unlocked.
7. Factory Reset
All the settings are restored to factory defaults.
Setting Item Default Value Setting Details
Factory Reset - All the settings are restored to factory defaults.
Select "Start" and press Enter.
• If "Factory Reset" is performed, your settings are
restored to the default values. Be sure to note
down your setting contents beforehand.