Owner's Manual

186
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Quick Menu
Menu operations
You can quickly adjust the settings you frequently use, such as tone adjustments,
etc.
You can make the settings on the TV screen during playback. Press Q on the
remote controller to display the Quick Menu.
Quick Menu
HDMI
Audio
AccuEQ
Level
BD/DVD
Discrete Audio Path Mode
HDMI Out
A/V Sync
Audio Return Channel
Select the item with the cursors / of the remote controller, and press the
Enter button to conrm your selection.
Use the cursors to change the settings.
• To return to the previous screen, press .
• To exit the settings, press Q.
 HDMI
Discrete Audio Path Mode: You can make the HDMI IN 2 jack exclusively for
audio to improve sound quality. Not that when this is set to on, the output of video
signals will stop and there will be no display on the TV screen.
• The display will appear on the TV screen when you press , but the video
signal out is stopped again when you press again.
HDMI Out: Select the HDMI OUT jack to output video signals from "MAIN",
"SUB", and "MAIN+SUB".
A/V Sync: If the video is behind the audio, you can delay the audio to offset the
gap. The setting can be set for each input.
• It cannot be set if the listening mode is Direct.
Audio Return Channel: You can enjoy the sound of the HDMI-connected ARC-
compatible TV through the speakers connected to the unit. Select "On" when