Filmware Update

ManualsBrandsIntegra ManualsAudio ReceiversIntegra Black 5.1 Channel Network A/V Receiver

Firmware Update Integra DSX-3

(6-5-2018)

We are pleased to offer this firmware update for the best possible

performance of your Integra AV Receiver.

This update may be installed via USB or Network. We

recommend USB for faster, more reliable installation.

DSX-3

(Current Version

2099-7030-2060-0010)

The 6/5/2018 update will address the following and includes

previous updates:

1. Minor bug fixes and stability improvements.

Previous Updates (latest firmware includes all previous)

The 4/4/2018 update will address the following:

1. Reduce noise during playback via USB/Network

The 1/29/2018 update will address the following:

1. Adds support for external audio inputs for "FlareConnect".

2. Minor bug fixes and improvements stability.

The 11/2/2017 update will address the following:

1. Adds support for new multi-room audio playback function

"FlareConnect".

*All audio devices in group and "Integra Control Pro" App is required

to update to the latest version.

• Setup Guide:

http://www.integrahometheater.com/wha_setup.php

2. Minor bug fixes and improvements stability.

Summary of content (6 pages)

PAGE 1
Firmware Update Integra DSX-3 (6-5-2018) We are pleased to offer this firmware update for the best possible performance of your Integra AV Receiver. This update may be installed via USB or Network. We recommend USB for faster, more reliable installation. DSX-3 (Current Version 2099-7030-2060-0010) The 6/5/2018 update will address the following and includes previous updates: 1. Minor bug fixes and stability improvements.
PAGE 2
The 8/31/2017 updates will address the: 1. Adds support for DTS Play-Fi. *To use Play-Fi, you need to download the application. http://integraworldwide.com/manual/sup/upd/playfi_int.pdf Before starting to use Play-Fi, set "On" at the "Network Standby" ("NET Stby") setting. The unit will automatically power on and change the selector to "NET" or "Network" 2. Adds support for "Dolby Atmos for 3.1.2ch". 3. Expand playable content of DTS:X. 4. Adds "Play Queue" function.
PAGE 3
2. Adds baseline support for FireConnect. This update will enable streaming from Network Services /USB/ Bluetooth/Music server. *Sampling rates of 44.1 kHz and 48 kHz are supported.(USB/Music server) *Integra Control Pro App is required to enjoy FireConnect. *Note for Bluetooth pairing: If Bluetooth devices were previously paired, you must pair the devices again after the Firmware update is complete. The 11/9/2016 update will address the following: 1. Improved stability of DSD playback.
PAGE 4
from the beginning. Updating the firmware and adjusting the settings will be done automatically, but may take some time to complete. Please follow the procedures as instructed when you update. Note that the update may fail, or cause problems for your A/V receiver, if you do any of the following: • Pull out the A/V receiver’s power cord; • Interrupt the power supply to the A/V receiver (e.g.
PAGE 5
1. Connect the USB Memory Device to the USB port of your computer and copy the contents of the unzipped/extracted folder onto your USB Memory Device. 2. Safely eject the USB Memory Device from your computer. How to upgrade the firmware via USB: 1. Insert the USB Memory Device containing the software into the USB port of the receiver. 2.
PAGE 6
1. If the unit is connected via LAN and there is firmware update available, the "Firmware Update Available" message may appear. To execute updating, select "Update Now" with the cursor buttons of the remote controller and press ENTER. The unit automatically turns itself into standby mode about 30 minutes after "Completed!" appears on the display, and updating will be complete. 2. Alternatively, to force an update, select “SETUP” on the front panel, then scroll and select “8.