> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others AV Receiver DSX-3 Instruction Manual Before Start What's in the box .................................................................... 2 Part Names Front Panel ............................................................................. 3 Rear Panel .............................................................................. 4 Remote Controller ...................................
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others What's in the box Before Start Main unit (1) Remote controller (RC-936R) (1), batteries (AAA/R03) (2) Speaker setup microphone (1) Indoor FM antenna (1) 2 Power cord (1) 0 Connect speakers with 4 Ω to 8 Ω impedance. 0 The power cord must be connected only after all other cable connections are completed.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Front Panel Part Names 1. Í On/Standby button: Turns the unit on or into standby mode. 2. Hybrid Standby indicator: Lights if the unit enters standby mode when the features are enabled that continue to work when this unit is in standby, such as HDMI Standby Through and Network Standby. 3. Display (P6) 4. Remote control sensor 5.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Rear Panel 90° 180° 1. TUNER FM 75Ω jack: Connect the supplied antenna. 2. Wireless antenna: Raise for Wi-Fi connection or when using a BLUETOOTH enabled device. The diagram shows the movable range for the wireless antenna. Do not try to force it beyond this range otherwise you may break it. 3.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Remote Controller 1. Í button: Turns the unit on or into standby mode. 2. Input selector buttons: Switches the input to be played. 3. Q (Quick Menu) button: You can perform common settings on the TV screen. (P50) 4. Cursors, Enter button: Select the item with the cursors and press Enter to confirm. 5. button: Displays the Setup menu. (P54) 6.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Display Neo:6 1. Lights in the following conditions. HDMI: HDMI signals are input and selected. ARC: Audio signals from the ARC compatible TV are input and selected. USB: When "USB" is selected with the input selector and the unit is connected by USB and the USB device is selected. Flashes if the USB is not properly connected.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 1. Speaker Layout Install 5.1 Channel System Front speakers output front stereo sound and the center speaker outputs sounds emanating from the center of the screen, such as dialog and vocals. Surround speakers create the sound field at the rear. The powered subwoofer reproduces bass sounds and enriches the sound field.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 3.1.2 Channel System-1 (Front High Speakers) 3´ (0.9 m) or more ＊1 This is a 3.1-channel system consisting of front speakers, a center speaker, and a powered subwoofer, with the addition of front high speakers, a type of height speaker. Front high speakers should be situated at least 3y/0.9 m higher than the front speakers.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 3.1.2 Channel System-2 (Ceiling Speakers) ＊1 This is a 3.1-channel system consisting of front speakers, a center speaker, and a powered subwoofer, with the addition of top middle speakers, a type of height speaker. Fit top middle speakers on the ceiling directly above the listening position. The distance between each pair should match the distance between the two front speakers.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 3.1.2 Channel System-3 (Dolby Enabled Speakers (Dolby Speakers)) ＊1 This is a 3.1-channel system consisting of front speakers, a center speaker, and a powered subwoofer, with the addition of Dolby enabled speakers (front), a type of height speaker.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Speaker combinations Speaker Channels FRONT CENTER SURROUND HEIGHT 2.1 ch 3.1 ch 4.1 ch 5.1 ch 2.1.2 ch 3.1.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 2. Connect the Speakers 1 a 1/2˝ (12 mm) 2 a b a 3 b a Speaker cable, b Subwoofer cable 12 Connect the speakers Refer to the illustration to connect the speaker system. Twist the wires of the speaker cable tightly before inserting into the SPEAKERS terminals. Make correct connection between the unit’s jacks and speaker’s jacks (i to i and j to j) for each channel.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. If the exposed wires of the speakers touch the rear panel or the + and – wires touch each other, the protection circuit will be activated. (P72) Setup 0 Settings for the speaker configuration you have connected need to be made in "1. AccuEQ Room Calibration" (P19) in Initial Setup.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 3. Connect the TV To ARC TV 1 For a TV that supports the ARC (Audio Return Channel) (P79) feature, use an HDMI cable and connect according to illustration "a". Choose an HDMI IN jack on the TV that supports ARC when connecting.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 4. Connect the HDMI AV Components 1 a a BD/DVD Streaming media player Cable/Satellite set-top box HDMI OUT e.g. BD This is an example of connection with an AV component that has an HDMI jack.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 5. Connect the Audio Components Connecting a CD player Use a digital coaxial cable to connect a CD player to the DIGITAL IN COAXIAL jack. Connecting a turntable You can also connect a turntable that has an MM-type cartridge to the PHONO jack. 0 If the turntable has a built-in audio equalizer, connect it to an AUDIO IN jack other than the PHONO jack.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 6. Connect Other Cables 1 Antenna Hookup 2 Connect the supplied FM indoor antenna to the TUNER FM 75Ω terminal. Move the FM indoor antenna around while playing the radio to find the position with the best reception. Network Hookup a b 3 Connect this unit to the network using wired LAN or Wi-Fi (wireless LAN).
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Initial Setup with Auto Start-up Wizard Initial Setup 1 2 Initial Setup starts automatically 1. Switch the input on the TV to that assigned to the unit. 2. Put batteries into the remote controller of this unit. 3. Press Í on the remote controller.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 1. AccuEQ Room Calibration Place the supplied speaker setup microphone in the listening position, measure the test tones emitted by the speakers, then the unit automatically sets the optimum volume level for each speaker, the crossover frequencies, and the distance from the listening position.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 3. Network Connection 4. Audio Return Channel Set up Wi-Fi connection with an access point such as a wireless LAN router. There are the following two methods of connecting by Wi-Fi: "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Share the iOS device's Wi-Fi settings with this unit.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others AV Component Playback Playback Basic operations Play an AV component or TV connected to this unit with an HDMI cable or other cable. 1. Switch the input on the TV to that assigned to the unit. 2. Press the input selector (a) on the remote controller with the same name as the jack to which you connected the player to switch the input.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Internet Radio 1 a b Basic operations Pandora® When this unit is connected to a network, you can listen to TuneIn or other preregistered Internet radio services. Depending on the internet radio service, the user may need to register from their computer first. 1. Switch the input on the TV to that assigned to the unit. 2. Press NET on the remote controller.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others like it. (I don't like this track) : Give a track "thumbs-down" and Pandora will ban that track from the current station. : Automatically find stations matching your preferences based on genre, specific artists, and songs, and delete those stations you don't need.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Spotify Basic operations 1 Spotify Connect play is possible by connecting this unit to the same network as a smart phone or tablet. To enable Spotify Connect, install the Spotify application on your smartphone or tablet and create a Spotify premium account. 1. Connect the smartphone to the network that this unit is connected to. 2.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Music Server It is possible to stream music files stored on PCs or NAS devices connected to the same network as this unit. The network servers this unit is compatible with are those PCs with players installed that have the server functionality of Windows Media® Player 11 or 12, or NAS that are compatible with home network functionality.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others The following remote controller operations are also possible. (a) When the folder or file lists are not shown on one screen, you can change the screen. (c) Pressed during play, this button changes the displayed track information. Pressed while a folder or file list is displayed, this button returns you to the play screen. (e) This button plays the previous track.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others USB Storage Device Basic play 1 Play music files on a USB storage device. 1. Switch the input on the TV to that assigned to the unit. 2. Plug your USB storage device with the music files into the USB port on the front of this unit. 3. Press "USB" on the remote controller. 0 If the "USB" indicator flashes on the display, check whether the USB storage device is plugged in properly.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others USB Storage Device Requirements 0 Note that operation is not guaranteed with all USB storage devices. 0 This unit can use USB storage devices that comply with the USB mass storage device class standard. The unit is also compatible with USB storage devices using the FAT16 or FAT32 file system formats.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others AirPlay® 1 Basic play 3 Wi-Fi 4 2 iPhone Integra DSX-3 XXX 5 You can wirelessly enjoy the music files on an iPhone®, iPod touch®, or iPad® connected to the same access point as this unit. 0 Update the OS version on your iOS device to the latest version. 1. Connect the iOS device to the access point. 2. Press NET. 3.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others BLUETOOTH® Playback Pairing Pairing Playing Back 1 1 1. When you press the button on the remote controller, "Now Pairing..." is displayed on this unit's display, and the pairing mode is enabled. Integra DSX-3 XXX 2 2 2. Enable (turn on) the BLUETOOTH function of the BLUETOOTH enabled device, then select this unit from amongst the devices displayed.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Listening to the FM Radio Tuning Automatically 1 1. Press Tuner on the remote controller. 2. Press Mode (d) on the remote controller so that "AUTO" appears on the display. 3. When you press the cursor / buttons (a) on the remote controller, automatic tuning starts, and searching stops when a station is found.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Listening Modes Selecting Listening Modes Input source & volume Select the optimum listening mode for movies, TV, music, and games by repeatedly pressing the Movie/TV, Music, and Game buttons. a 1. During play, press one of the three buttons (b) on the remote controller. 2. Press the selected button repeatedly to switch the modes displayed on the display of the unit.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Listening Mode Effects Updating of listening modes We plan to provide support for the Dolby Atmos and DTS:X audio format through firmware updates for this unit. This means that the selectable listening modes depend on the version of firmware. On firmware version before Dolby Atmos support 0 Dolby Pro Logic Ⅱ -related modes can be selected.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others output. DSD Mode suitable for playing sources recorded in DSD. 0 This unit supports DSD signals input through HDMI IN. However, depending on the connected player, better sound is possible when output from the PCM output of the player. 0 This listening mode cannot be selected if the output setting on your Blu-ray Disc/DVD player is not set to DSD.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others atmosphere to Orchestra mode. listener's left and right ears. Selectable listening modes Game-Sports Suitable for audio source with much reverberation. TV Logic Suitable for TV shows produced in a TV studio. This mode enhances the surround effects to the entire sound to give clarity to voices and create a realistic acoustic image.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Movie/TV button This is a list of listening modes you can select according to the audio format of the input signal. Input Format Listening Mode Analog Direct Mono Dolby Surround Surround Enhancer PL Ⅱ Movie ＊ 1 Neo:6 Cinema ＊ 1 DTS Neural:X TV Logic ＊ 2 AllCh Stereo ＊ 1 Full Mono ＊ 1 T-D ＊ 1: A center speaker or surround speakers need to be installed.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format DSD Direct Dolby D Listening Mode Input Format Listening Mode Direct Dolby D+ Direct DSD ＊ 1 ＊ 2 Dolby D ＊ 1 ＊ 2 Dolby D+ ＊ 1 ＊ 2 Dolby Surround Dolby Surround Dolby Surround Surround Enhancer Surround Enhancer Surround Enhancer PL Ⅱ Movie PL Ⅱ Movie PL Ⅱ Movie ＊ 3 ＊3 ＊3 Neo:6 Cinema ＊ 3 Neo:6 Cinema ＊ 3 Neo:6 Cinema ＊
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format Dolby TrueHD Direct DTS Input Format Listening Mode Direct DTS 96/24 Direct Dolby TrueHD ＊ 1 ＊ 2 DTS ＊ 1 ＊ 2 Dolby Surround PL Ⅱ Movie Surround Enhancer Neo:6 Cinema ＊ 3 Neo:6 Cinema ＊ 3 PL Ⅱ Movie DTS 96/24 ＊ 1 ＊ 2 ＊3 PL Ⅱ Movie ＊ 3 DTS Neural:X DTS Neural:X Neo:6 Cinema ＊ 3 TV Logic ＊ 4 TV Logic ＊ 4 TV Logic AllCh Ster
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format DTS Express Direct DTS-HD HR Listening Mode Input Format Listening Mode Direct DTS-HD MSTR Direct DTS Express ＊ 1 ＊ 2 DTS-HD HR ＊ 1 ＊ 2 DTS-HD MSTR ＊ 1 ＊ 2 PL Ⅱ Movie PL Ⅱ Movie PL Ⅱ Movie ＊ 3 ＊3 ＊3 Neo:6 Cinema ＊ 3 Neo:6 Cinema ＊ 3 Neo:6 Cinema ＊ 3 DTS Neural:X DTS Neural:X DTS Neural:X TV Logic ＊ 4 TV Logic ＊ 4 TV Log
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Music button This is a list of listening modes you can select according to the audio format of the input signal. Input Format Listening Mode Analog Direct Stereo Dolby Surround Surround Enhancer PL Ⅱ Music ＊ 1 Neo:6 Music ＊ 1 DTS Neural:X Orchestra ＊ 2 Unplugged ＊ 2 Studio-Mix ＊ 2 AllCh Stereo ＊ 1 Full Mono ＊ 1 ＊ 1: A center speaker or surround speakers need to be installed.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format DSD Listening Mode Direct Input Format Dolby Atmos Listening Mode Input Format Listening Mode Direct Dolby D Direct Stereo Stereo Stereo DSD ＊ 1 ＊ 2 Dolby Atmos Dolby D ＊ 1 ＊ 2 Dolby Surround Surround Enhancer Surround Enhancer Orchestra PL Ⅱ Music ＊ 3 Unplugged Neo:6 Music ＊ 3 Studio-Mix DTS Neural:X AllCh Stereo Orchestra ＊ 4 Full Mono Unplugged
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format Dolby D+ Direct Dolby TrueHD Stereo Dolby D+ Input Format Listening Mode Direct DTS Direct Stereo ＊1＊2 Stereo Dolby TrueHD ＊1＊2 DTS ＊ 1 ＊ 2 Dolby Surround Dolby Surround PL Ⅱ Music ＊ 3 Surround Enhancer Surround Enhancer Neo:6 Music ＊ 3 PL Ⅱ Music ＊ 3 PL Ⅱ Music ＊ 3 DTS Neural:X Neo:6 Music Neo:6 Music Orchestra ＊ 4 ＊3
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format DTS 96/24 Direct DTS Express Stereo Listening Mode Input Format Listening Mode Direct DTS-HD HR Direct Stereo DTS 96/24 ＊1＊2 Stereo DTS Express ＊1＊2 DTS-HD HR ＊ 1 ＊ 2 PL Ⅱ Music ＊ 3 PL Ⅱ Music ＊ 3 PL Ⅱ Music ＊ 3 Neo:6 Music Neo:6 Music Neo:6 Music ＊ 3 ＊3 ＊3 DTS Neural:X DTS Neural:X DTS Neural:X Orchestra Orchestra
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format Listening Mode DTS-HD MSTR Direct DTS:X Direct Stereo Stereo DTS-HD MSTR ＊1＊2 DTS:X PL Ⅱ Music ＊ 3 Orchestra ＊ 1 Neo:6 Music Unplugged ＊ 1 ＊3 DTS Neural:X Studio-Mix ＊ 1 Orchestra ＊ 4 AllCh Stereo ＊ 2 Unplugged ＊ 4 Full Mono ＊ 2 Studio-Mix ＊ 4 AllCh Stereo ＊ 2 Full Mono ＊ 2 ＊ 1: Cannot be selected when the input format is 2
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format PCM Music files (except DSD/ Dolby TrueHD) Direct Multich PCM Listening Mode Input Format Listening Mode Direct DSD Direct Dolby Surround Multich ＊ 1 DSD ＊ 1 ＊ 2 Surround Enhancer Dolby Surround Dolby Surround PL Ⅱ Game ＊ 1 Surround Enhancer Surround Enhancer DTS Neural:X DTS Neural:X PL Ⅱ Game ＊ 3 Game-RPG ＊ 2 Game-RPG ＊
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format Dolby Atmos Direct Dolby D Listening Mode Input Format Listening Mode Direct Dolby D+ Direct Dolby Atmos Dolby D ＊ 1 ＊ 2 Dolby D+ ＊ 1 ＊ 2 Surround Enhancer Dolby Surround Dolby Surround Game-RPG Surround Enhancer Surround Enhancer Game-Action PL Ⅱ Game PL Ⅱ Game ＊ 3 Game-Rock Game-RPG ＊ 4 Game-RPG ＊ 4 Game-Sports Game-A
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format Dolby TrueHD Direct DTS Listening Mode Input Format Listening Mode Direct DTS 96/24 Direct Dolby TrueHD ＊ 1 ＊ 2 DTS ＊ 1 ＊ 2 Dolby Surround PL Ⅱ Game Surround Enhancer DTS Neural:X DTS Neural:X PL Ⅱ Game Game-RPG Game-RPG ＊ 4 ＊3 DTS 96/24 ＊ 1 ＊ 2 ＊3 ＊4 PL Ⅱ Game ＊ 3 Game-RPG ＊ 4 Game-Action ＊ 4 Game-Action ＊ 4 Game-Acti
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode Input Format DTS Express Direct DTS-HD HR Input Format Listening Mode Direct DTS-HD MSTR Direct DTS Express ＊ 1 ＊ 2 DTS-HD HR ＊ 1 ＊ 2 DTS-HD MSTR ＊ 1 ＊ 2 PL Ⅱ Game PL Ⅱ Game PL Ⅱ Game ＊ 3 ＊3 ＊3 DTS Neural:X DTS Neural:X DTS Neural:X Game-RPG Game-RPG Game-RPG ＊ 4 ＊4 ＊4 Game-Action ＊ 4 Game-Action ＊ 4 Game-Action ＊ 4 Game-Rock Gam
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Input Format Listening Mode DTS:X Direct DTS:X Game-RPG ＊ 1 Game-Action ＊ 1 Game-Rock ＊ 1 Game-Sports ＊ 1 AllCh Stereo ＊ 2 Full Mono ＊ 2 T-D ＊ 1: Surround speakers need to be installed. ＊ 2: A center speaker or surround speakers need to be installed.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Quick Menu 1 By pressing the Q button on the remote controller during play, you can adjust frequently used settings, such as the sound quality, using on-screen menus. 1. Press Q on the remote controller. 2. After the Quick Menu is displayed, select the content with / on the remote controller and press Enter to confirm your selection.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others when you need to reduce the volume while watching a movie late night. You can enjoy the effect only when playing Dolby series and DTS series input signals. 0 The setting cannot be used in the following cases. – If "3.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Other Functions Playing audio and video from separate sources It is possible to play audio and video from different sources. For example, you can play audio from the CD player and video from the BD/DVD player. The procedure in this case is as follows: 1. Press BD/DVD on the remote controller. 2. Press CD on the remote controller. 3. Start playback on the BD/DVD player and CD player.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Supplementary information for player functions Supplementary information Due to firmware (the software for the system) updates after you make your purchase or firmware changes during production of the product, there may be additions or changes to the features available compared to what is in the instruction manual.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Setup Menu Advanced Setup 1 2 The unit allows you to configure advanced settings to provide you with an even better experience. 1. Switch the input on the TV to that assigned to the unit. 2. Press on the remote controller. 3. After the Setup menu is displayed, select the content with / on the remote controller and press Enter to confirm your selection. Setup 1.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Impose OSD Screen Saver Set whether or not to display the information on the TV when the volume is adjusted or input is changed, for example. "On (Default Value)": OSD displayed on the TV "Off": OSD not displayed on the TV 0 OSD may not be displayed depending on the input signal even if "On" is selected.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 0 Supported sampling rates for PCM signals (stereo, mono) from a digital input are 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz/16bit, 20bit, and 24bit. ■ 4. Analog Audio Input You can change input assignment between the input selectors and AUDIO IN jacks. If you do not assign a jack, select "-----". BD/DVD "AUDIO 1" to "AUDIO 2": Assign a desired AUDIO IN jack to the BD/DVD input selector.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Center Select the crossover frequency from "40Hz" to "200Hz" to start outputting frequencies for each channel. (Default Value is "100Hz") "Full Band": Full band will be output. 0 "Full Band" can be selected only when "Front" is set to "Full Band".
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others ■ 4. Level Calibration Front Left Select a value between "j12 dB" and "i12 dB" (in 1 dB increments). A test tone will be output each time you change the value. Select the desired level (Default Value is "0 dB"). Center Select a value between "j12 dB" and "i12 dB" (in 1 dB increments). A test tone will be output each time you change the value.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Subwoofer After selecting the speaker frequency from between "25 Hz" and "160 Hz" with the cursors /, adjust the volume of that frequency between "j6.0 dB" and "i6.0 dB" with /. (Default Value is "0.0 dB") 0 This cannot be selected if "No" is set in "Configuration" "Subwoofer". 3. Audio Adjust ■ 1.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others ■ 3. DTS 4. Source 0 We plan to provide support for the DTS:X audio format through firmware updates for this unit. This setting will become possible after updating. ■ 1.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others ■ Audio Select Select the priority for input selection when multiple audio sources are connected to one input selector, such as connections to both the "BD/DVD" HDMI IN jack and the "BD/DVD" AUDIO IN jack. The setting can be separately set to each input selector button. Select the input selector to configure. Note that there are some default values you cannot change.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 5. Hardware HDMI Standby Through ■ 1. HDMI HDMI CEC 62 Setting to "On" enables the input selection link and other link functions with HDMI connected CEC compliant device. "On": Use this function "Off (Default Value)": Do not use this function When changing this setting, turn off and then on again the power of all connected components.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Audio TV Out Audio Return Channel Auto Lip Sync You can enjoy audio through the speakers of the TV while this unit is on. "On": Use this function "Off (Default Value)": Do not use this function 0 The setting is fixed to "Auto" if "HDMI CEC" is set to "On". If you change this setting, set "HDMI CEC" to "Off.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Friendly Name AirPlay Password 64 Change the device name for this unit which is shown on other devices connected to the network to an easily recognized name. This is set to Integra DSX-3 ＊＊＊＊＊＊ at the time of purchase. (" ＊ " stand for alphanumeric characters identifying each unit) 1. Press Enter to display the Edit screen. 2.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others ■ 3. Bluetooth Status Bluetooth Select whether or not to use the BLUETOOTH function. "On (Default Value)": Enables connection with a BLUETOOTH enabled device by using the BLUETOOTH function. Select "On" also when making various BLUETOOTH settings.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others USB Power Out at Standby Network Standby Bluetooth Wakeup Devices connected to the USB port are supplied with electricity even when this unit is in standby mode when this function is "On".
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others ■ 5. Load Default Load Default Reset the unit to return the settings to the status at the time of shipment. Reset is complete when "Clear" is displayed on the display and the unit switches to standby. Your settings will also be initialized when you reset, so note down your settings before starting reset.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Control Function Settings You can enable the control functions between the unit and external devices. Special devices or cable connections are necessary to enable the functions. For more information about installation, contact a store specializing in these products.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Firmware Update Firmware Update Update function of this unit How to update firmware Updating the Firmware via Network This unit has functionality to update the firmware (the system software) over a network or by the USB port. This enables us to make improvements to a variety of operations and to add features. There are two methods for updating the firmware: via network and via USB.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 4. Press Enter with "Update" selected to start update. 0 During the update, the TV screen may go black depending on the updated program. In that case, check the progress on the display of this unit. The TV screen will remain black until the update is complete and the power is turned on again. 0 "Completed!" is displayed when the update is complete. 5.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others 0 Do not use Í on the remote controller. If an error message is displayed: When an error occurs, "＊-＊＊ Error!" is displayed on the display of this unit. ("＊" represents an alphanumeric character.) Check the following: 0 ＊ -01, ＊ -10: USB storage device not found. Check whether the USB storage device or USB cable is correctly inserted to the USB port of this unit.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Troubleshooting Others Before starting the procedure Problems may be solved by simply turning the power on/off or disconnecting/connecting the power cord, which is easier than working on the connection, setting and operating procedure. Try the simple measures on both the unit and the connected device.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others A speaker produces no sound 0 Make sure that the polarity of the speaker cables ( ＋ / − ) is correct, and that no bare wires are in contact with the metal part of speaker terminals. 0 Make sure that the speaker cables are not shorting. 0 Check that the speaker connections have been made correctly. (P12) Settings for the speaker connection environment need to be made in "1.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Images flicker 0 It is possible that the resolution of the player is not compatible with the TV's resolution. If you have connected the player to this unit with an HDMI cable, try changing the output resolution on the player. There also may be an improvement if you change the screen mode on the TV.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Cannot access the network server 0 This unit needs to be connected to the same router as the network server. 0 This unit is compatible with Windows Media® Player 11 or 12 network servers or NAS that are compatible with home network functionality. 0 You may need to make some settings on Windows Media® Player.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others ■ Others Strange noises can be heard from this unit 0 If you have connected another unit to the same wall outlet as this unit, this noise may be an effect from the other unit. If the symptoms improve by unplugging the power cord of the other unit, use different wall outlets for this unit and the other unit.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others General Specifications Amplifier (Audio) section Network Section Rated Output Power (FTC) With 4 ohm loads, both channels driven, from 1 kHz; rated 50 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milliwatts to rated output.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others Audio Outputs Analog SUBWOOFER PRE OUT Speaker Outputs FRONT L/R, CENTER, SURROUND L/R, SUBWOOFER Phones Phones (Front, φ3.5 mm) Others USB: 1 (Front, Ver.2.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others About HDMI Compatible functions HDMI (High Definition Multimedia Interface) is a digital interface standard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components.
> Before Start > Part Names > Install > Initial Setup > Playback Supplementary information | Advanced Setup | Others License and Trademark Information AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion or later, and PC with iTunes 10.2.2 or later. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Surround and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com.
1-10-5 Yokoami, Sumida-ku, Tokyo 130-0015 JAPAN http://www.integraworldwide.com 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 800-225-1946, 201-818-9200 Fax: 201-785-2650 http://www.integrahometheater.com Gutenbergstrasse 3, 82178 Puchheim, Germany Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.integra.eu 302, Building 1, 20 North Chaling Rd., Xuhui District, Shanghai, China 200032, Tel: +86-21-52131366 Fax: +86-21-52130396 http://www.integra.com.
