Owner's Manual
Table Of Contents
- Front Panel
- Step 1: Connections
- Step 2: Initial Setup
- Step 3: Playing Back
- Details on AM/FM reception
- Playing Music Files on a USB Storage Device
- Listening to Internet Radio
- Playing Music with DLNA
- Playing Music Files in a Shared Folder
- Operating Music Files with the Remote Controller
- Using the Listening Modes
- Advanced Settings (Setup Menu)
- Operating Other Components with the Remote Controller
- Advanced speaker connections
- Connecting and Operating Onkyo RI Components
- Control Function between the Unit and External Component
- Firmware Update
- Troubleshooting
- Reference Information
Advanced Settings (Setup Menu)
En-40
Setting Item Default Value Setting Details
Friendly Name DTR-20�7 Change the name for this unit to a simple one for
display on the equipment connected by network�
1� Press Enter to display the Edit screen�
2� Select a character or symbol with the cursors
and press Enter�
Repeat it to input 31 or less characters�
"A/a": Switches between upper and lower
cases� (Pressing +10 on the remote
controller also toggles between upper and
lower cases�)
"←" "→": Moves the cursor to the arrow
direction�
"
": Removes a character on the left of the
cursor�
"Space": Puts a space�
● Pressing CLR on the remote controller will
remove all the input characters�
3� After inputting, select "OK" with the cursors
and press Enter�
The input name will be saved�
AirPlay Password ----- You can enter a password (maximum of 31
places) so that only the entered user can use
AirPlay�
1� Press Enter to display the Edit screen�
2� Select a character or symbol with the cursors
and press Enter�
Repeat it to input 31 or less characters�
"A/a": Switches between upper and lower
cases� (Pressing +10 on the remote
controller also toggles between upper and
lower cases�)
"←" "→": Moves the cursor to the arrow
direction�
"
": Removes a character on the left of the
cursor�
"Space": Puts a space�
● Pressing D on the remote controller will
switch whether to mask the password with
" " or display in the plain text�
● Pressing CLR on the remote controller will
remove all the input characters�
3� After inputting, select "OK" with the cursors
and press Enter�
The input password will be saved�
Setting Item Default Value Setting Details
Usage Data No As a means of improving the quality of our
products and services, Onkyo may collect
information about your usage over the network�
Select "Yes" if you agree to our collecting this
information� Select "No" if you do not want us to
collect this information�
● You can set this after confirming the Privacy
Policy� When you select "Usage Data" and
press Enter, the Privacy Policy is displayed�
(The same screen is displayed once also
when setting up the network connection�) If
you agree to the collection of the information,
this setting also becomes "Yes"� Note that
if you agree to the Privacy Policy but select
"No" for this setting, the information will not be
collected�
Network Check – You can check the network connection�
Press Enter when "Start" is displayed�
● Wait for a while if "Network" cannot be selected� It will appear when the network function is started up�