Owner's Manual

Advanced Settings
27
Speaker Distance
Set the distance from each speaker to the listening position. Settings are automatically
configured if you use the automatic speaker setup.
Setting Item Default Value Setting Details
Unit feet/meters Specify the unit of distance for configuring settings.
"feet": When setting in feet (0.1ft to 30.0ft, in
increments of 0.1ft)
"meters": When setting in meters (0.03m to 9.00m,
in increments of 0.03m)
Front Left 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
Center 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
Front Right 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
Surround Right 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
Back Right 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
r The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
Back Left 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
r The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Front Speakers Type" is
set to "Bi-Amp".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
Setting Item Default Value Setting Details
Back 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
r The setting is displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back ch" is set to "1ch".
r This setting cannot be changed when "Speaker
Settings" - "Powered Zone 2" is set to "Yes" and
Zone 2 is turned on.
Surround Left 7.0ft/2.10m Specify the distance between each speaker and the
listening position.
Subwoofer 12.0ft/3.60m Specify the distance between each speaker and the
listening position.
Height Left 9.0ft/2.70m Specify the distance between each speaker and the
listening position.
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Height Speakers Type"
is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
Height Right 9.0ft/2.70m Specify the distance between each speaker and the
listening position.
r This setting cannot be changed in any of the
following cases.
– "Speaker Settings" - "Height Speakers Type"
is set to "Not Use".
– "Speaker Settings" - "Powered Zone 2" is set
to "Yes" and also Zone2 is set to on.
r When the speaker is set to "No" or "None" in "Speaker Configuration", the settings for "Speaker
Distance" cannot be changed.
r Default values vary depending on the regions.