Owner's Manual

Advanced Settings
36
OSD Setup
Make the setting of on-screen display function that can display the setting menu screen,
volume operation screen and the like on the TV.
Setting Item Default Value Setting Details
On Screen Display On Set whether or not to display the operation
screen on the TV.
"On": The operation screen will be displayed on
the TV.
"Off": The operation screen will not be displayed
on the TV.
r The operation screen may not be displayed
depending on the input signal even if "On"
is selected. If the operation screen is not
displayed, change the resolution of the
connected device.
Language English Select the on-screen display language.
Screen Saver 3min Set the time to start the screen saver. Select a
value from "3min", "5min", "10min" and "Off".
12V Trigger A Setup
You can enable power link operation when you connect the unit and the external devices
equipped with 12V trigger input jack. When the desired input is selected, power link
operation will be activated with a control signal of maximum 12 V/150 mA output from the
12V trigger output jack.
Setting Item Default Value Setting Details
Delay 0sec Set after how many seconds the 12V trigger
output will occur in response to the unit's
operation. As some devices cause a large
current when they turn on, delay the output if
such devices are connected. Select a value
between "0sec" to "3sec".
Setting Item Default Value Setting Details
BD/DVD Main Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone2/Zone3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback
CBL/SAT Main Set the 12V trigger output setting to each
input. Setting should be made for each 12V
TRIGGER OUT jack.
"Off": No output
"Main": Will be output when selected as input
source of main room playback
"Zone2": Will be output when selected as
input source of Zone 2 playback
"Main/Zone2": Will be output when selected
as input source of main room or Zone 2
playback
"Zone3": Will be output when selected as
input source of Zone 3 playback
"Main/Zone3": Will be output when selected
as input source of main room or Zone 3
playback
"Zone2/Zone3": Will be output when selected
as input source of Zone 2 or Zone 3 playback
"All": Will be output when selected as input
source of main room, Zone 2 or Zone 3
playback