Owner's Manual

39
En
Advanced Operations
Advanced Setup
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver’s
various settings. Settings are organized into 9 categories
on the main menu.
Carry out the settings by using the on-screen display.
Note
• This procedure can also be performed on the AV receiver by
using Setup, the arrow buttons, and Enter.
• During Audyssey 2EQ
®
Room Correction and Speaker Setup,
messages and alike that are displayed on the TV screen will
appear on the display.
Explanatory Notes
On-screen Setup Menus
The on-screen setup menus appear only on a TV that
is connected to the HDMI OUT. If your TV is
connected to the composite video MONITOR OUT V
or the COMPONENT VIDEO OUT, use the AV
receiver’s display when changing settings.
This section describes the procedure for using the
remote controller unless otherwise specified.
a Input/Output Assign
(➔ page 40)
f Miscellaneous
(➔ page 51)
b Speaker Setup
(➔ page 41)
*1
(Australian and Chinese
models)
g Hardware Setup
(➔ page 52)
c Audio Adjust
(➔ page 44)
h Remote Controller
Setup (➔ page 63)
d Source Setup
(➔ page 46)
i Lock Setup
(➔ page 55)
e Listening Mode Preset
(➔ page 50)
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
a
b
c
d
e
f
g
h
i
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
1. Input/Output Assign
6. Miscellaneous
1. Volume Setup
2. OSD Setup
3. 12V Trigger A Setup
4. 12V Trigger B Setup
5. 12V Trigger C Setup
1. Speaker Settings
2. Speaker Configuration
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
2. Speaker Setup
*1
1. Remote ID
2. MultiZone
3. Tuner
4. HDMI
5. Auto Standby
6. Network
7. Firmware Update
7. Hardware Setup
1. Multiplex/Mono
2. Dolby
3. DTS
4. Theater-Dimensional
5. LFE Level
3. Audio Adjust
1. Remote Mode Setup
8. Remote Controller Setup
1. Audyssey
2. IntelliVolume
3. A/V Sync
4. Name Edit
5. Picture Adjust
6. Audio Selector
4. Source Setup
Setup
9. Lock Setup
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. PC
5. Listening Mode Preset
Common Procedures in Setup Menu
1
Press Receiver followed by Setup.
Tip
• If the main menu doesn’t appear, make sure the appropriate
external input is selected on your TV.
2
Use q/w to select a menu, and then press Enter.
3
Use q/w to select a target, and then press Enter.
4
Use q/w to select an option, and use e/r to change
the setting.
Press Setup to close the menu.
Press Return to return to the previous menu.
Remote indicator
Return
Receiver
q/w/e/r
Enter
Setup
a Menu selection
b Setting target
c Setting options (default setting underlined)
Main Menu Speaker Configuration
■ Subwoofer
` Yes
` No
a
b
c